···
Log in / Register

Is a vehicle inspection required for car transfer?

5 Answers
MacJoanna
07/29/25 11:37pm

Vehicle inspection is required for car transfer. Below are the relevant details: 1. Fill out the sales contract: Obtain the used vehicle sales contract at the hall counter and fill it out. This contract is in triplicate, with one copy each for the buyer, the seller, and the industrial and commercial department. 2. Transfer inspection: Drive the vehicle directly to the transfer inspection area for inspection, photography, number tracing, and license plate removal. Fill out the inspection record form, and after all procedures are completed, drive the vehicle back to the parking lot, then proceed to the transfer hall to complete the formalities. 3. Complete the transfer procedures: After returning to the transfer hall, take a number, queue up, and wait for your number to be called. The staff will confirm that the vehicle has no violations before starting the transfer procedures, and the transfer fee will need to be paid. After payment, proceed to the transfer acceptance window to complete the relevant procedures. Before processing, fill out the Motor Vehicle Registration, Transfer, and Cancellation Form and the Motor Vehicle Import Registration Form. 4. Receive the new license plate: After completing the transfer acceptance, take the receipt to the payment window to pay the transfer fee. Then, you can select a new number and receive the new license plate, vehicle license, and registration certificate, completing the transfer process.

Was this review help?
7
3
Share
Duarte
08/16/25 2:39am

Yes, vehicle transfer typically requires an inspection. Having purchased several cars myself, I've gone through this step each time during the transfer process, as it ensures the car is safe and reliable when ownership changes hands. At the DMV, staff will inspect the vehicle's exterior for any damage, such as body scratches or whether the lights are functioning properly. Then they move on to the mechanical parts, testing the braking system and engine operation to confirm there are no faults. They also measure emission levels to ensure compliance with environmental standards. This isn't just a legal requirement—it's crucial for protecting both you and the buyer, as any undisclosed issues post-transfer could lead to disputes. The whole process doesn't take too long, but you'll need to book an appointment in advance. Before the transfer, I recommend cleaning the car thoroughly and checking all functions to avoid inspection failures that could waste time. Don't forget to bring the vehicle registration and ID card; some locations also require an insurance policy. Overall, the inspection is a critical part of the transfer process, giving you peace of mind when hitting the road.

Was this review help?
4
2
Share
Expand All
VonColeman
10/19/25 3:08am

From my experience, vehicle inspection is mandatory for ownership transfer. As a novice driver, I was quite confused during my first transfer, but the staff explained it's mainly to prevent fraudulent transactions. The inspection usually takes place at the DMV or designated testing stations, involving a few simple steps: first, an exterior scan to check for accident damage; then a road test to assess performance, such as throttle response and steering; finally, an emissions test. This process helps filter out problematic vehicles, preventing you from buying flood-damaged or heavily repaired cars. Without inspection, the transfer simply can't proceed, and there might even be legal risks. Though slightly tedious, I find this step very useful for protecting my interests. Before transfer, I always check the engine oil and tire pressure—these small details can make the inspection go smoother. Remember to pay fees on time, or you might have to queue again.

Was this review help?
9
1
Share
Expand All
VivianMarie
12/02/25 3:42am

Vehicle transfer usually requires an inspection, mainly for safety. They will check if the brakes are responsive, if the lights are working, and ensure there are no hidden hazards. The process is quick and can be completed in one go.

Was this review help?
6
4
Share
Expand All
ManuelDella
12/02/25 3:44am

Vehicle inspection is mandatory for ownership transfer. I've gone through it several times and found it quite practical. It helps verify the authenticity of the vehicle and prevents the circulation of counterfeit or problematic cars. The process isn't complicated: schedule an appointment, drive to the inspection site, where they check basic items like the engine and emissions, usually completed in about ten minutes. Don't skip this step, or the transfer might be invalid. The cost is generally low but varies by location. It's advisable to check nearby inspection sites in advance to avoid going to the wrong place and wasting time. Overall, it's a hassle-free process.

Was this review help?
10
0
Share
Expand All
More Forum Discussions

How many kilometers can the Hyundai Elantra run?

Elantra can reach 140 or 160 km/h on the highway, but the car may feel unstable and unsafe. The general speed limit on highways is 120 km/h, so it's best not to exceed the speed limit. The Elantra is a brand under Hyundai Motors, belonging to the A-class category. In terms of appearance, it features a dynamic and stylish design with naturally flowing body lines. The chrome trim enhances its sporty feel, showcasing the typical family face with fewer sharp lines but more fullness, giving it a harmonious and moderate look. The short rear end easily conveys a sense of fullness and roundness with smooth lines. More details are as follows: 1. In terms of power, it is equipped with a 1.6L γ engine and a 1.8L Nu engine, paired with a 6-speed manual transmission and a 6-speed automatic transmission. 2. In terms of configuration, it includes smart key + one-button start, driver's ventilated seat, ESS emergency braking reminder, automatic windshield defogging, tire pressure monitoring system, BOSCH brake priority system, rear air conditioning vents, and many other comfort and safety features.
13
2
Share

What Causes Engine Oil Burning in Vehicles?

Vehicle engine oil burning is caused by: 1. Use of unqualified engine oil; 2. Prolonged failure to change engine oil; 3. Cold starts with excessive throttle; 4. Extended operation with insufficient oil levels; 5. Prolonged operation under high-temperature conditions; 6. Continuous operation under overload and high-speed conditions; 7. Long-term operation in poor air quality environments without timely replacement of air filters. Methods to address vehicle oil burning include: 1. Prompt replacement of valve stem seals to ensure valve sealing; 2. Regular cleaning of carbon deposits on piston rings or direct replacement of piston rings; 3. Maintaining moderate driving habits in daily use.
19
1
Share

What are the differences between the 2020 Teana and the 2019 Teana?

The differences between the 2020 Teana and the 2019 Teana are: 1. The seat belt reminder positions are different: the 2020 Teana has seat belt reminder functions for both front and rear seats; the 2019 Teana only has a front seat belt reminder function. 2. The steering wheel materials are different: the 2020 Teana's steering wheel is made of plastic; the 2019 Teana's steering wheel comes standard with plastic but can be optionally upgraded to leather. Both the 2020 Teana and the 2019 Teana are four-door, five-seater sedans under Dongfeng Nissan, with body dimensions of length 4901mm, width 1850mm, height 1447mm, and a wheelbase of 2825mm.
2
2
Share

How to Check Vehicle Driving Route with Car Positioning?

To check a vehicle's driving route through positioning, you can install a GPS tracker. Here are the detailed components of a GPS tracking system: 1. Space Segment: Consists of 24 satellites. These orbit at 20,200 km above the Earth's surface with a 12-hour orbital period. 2. Ground Control System: Composed of monitoring stations, a master control station, and ground antennas. 3. User Equipment: The GPS receiver. Its primary function is to capture selected satellites based on a specific elevation angle and track their movements.
19
2
Share

How to Determine if an Oxygen Sensor Has Failed?

Methods to determine if an oxygen sensor has failed include: 1. Decreased engine power, increased fuel consumption, and unstable idle operation; 2. Excessive carbon content. The testing methods for an oxygen sensor are: 1. Unplug the oxygen sensor connector; 2. Use a multimeter in resistance mode to measure the resistance between pins 1 and 2 of the sensor; 3. A resistance value between 4 and 40 is normal—if the resistance is abnormal, the oxygen sensor should be replaced. The working principle of an oxygen sensor is: It uses a ceramic sensing element to measure the oxygen potential in a heating furnace or exhaust pipe, calculates the corresponding oxygen concentration based on the chemical equilibrium principle, and monitors and controls the air-fuel ratio during combustion to ensure product quality and compliance with exhaust emission standards.
12
5
Share

How to Turn Off the Fog Lights on a Teana?

The fog light switch for the Teana is located on the light control lever to the left of the steering wheel. Simply twist it to turn off the fog lights. Below is an introduction to fog lights: 1. The purpose of fog lights is to make the vehicle visible to others in foggy or rainy conditions where visibility is significantly affected by the weather. Therefore, fog lights need to have a light source with strong penetration. Most vehicles use halogen fog lights, while LED fog lights are considered more advanced. 2. Fog lights can be removed, but the removal process is relatively complex. The steps for removing fog lights are as follows: (1) Use a flathead screwdriver to gently pry from the back of the fog light grille to release the clips holding it in place. This will create a larger gap at the front. Then, carefully use the screwdriver to pry the clips securing the grille to the front bumper one by one. Once all clips are released, the fog light grille can be removed. Be sure to proceed slowly and gently to avoid breaking the plastic clips. (2) You will now see the fog light fixed to the front bumper. Upon closer inspection, you will notice that the fog light is secured by two screws. Use a T-25 spline tool to remove these screws, and keep them safe for reinstallation later. (3) After removing the screws, the fog light is held in place by two tabs inserted into the bumper's clip holes. Hold the side where the screws were removed and gently pull upward to detach the fog light.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.