Is a tire pressure of 280 normal for a Camry?

Does the Subject 2 Retest Start from the Beginning?

For the two attempts in Subject 2, if you fail the first time, you will start the test from the beginning. The Subject 2 test allows one retake if the initial attempt is unsuccessful. If you do not take the retest or fail the retest, the current test session ends, and the applicant must reschedule the test after ten days. Additional Information: Notes: Within the validity period of the driving skill test permit, the number of scheduled tests for Subject 2 and Subject 3 road driving skills tests must not exceed five times. If the fifth scheduled test is still unsuccessful, the passing scores of other subjects will be invalidated. Passing Criteria: The full score is 100 points, with evaluation standards set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The following conditions must be met to pass: For applicants applying for large buses, tractors, city buses, medium-sized buses, or large trucks, a score of 90 points is required; for other vehicle types, a score of 80 points is required.

17

1

Share

How are automotive engine oil grades classified?

1. Below are the methods for classifying automotive engine oil grades: 1. AB Series: Gasoline and light-duty diesel engine oils. 2. C Series: Catalyst-compatible engine oils. 3. E Series: Heavy-duty diesel engine oils. 2. Below are the functions of engine oil: 1. Friction reduction: A sufficiently thick oil film separates the surfaces of relatively sliding parts, thereby reducing wear. 2. Sealing effect: Engine oil can form a seal between the piston rings and pistons, reducing gas leakage and preventing external contaminants from entering. 3. Anti-rust effect: Lubricating oil can adhere to part surfaces, preventing contact with water, air, acidic substances, and harmful gases. 4. Cushioning effect: When the pressure in the engine cylinder rises sharply, suddenly increasing the load on the pistons, piston skirts, connecting rods, and crankshaft bearings, this load is transmitted and lubricated through the bearings, cushioning the impact load. 5. Cleaning effect: High-quality engine oil can carry carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank through circulation, flushing away dirt generated on the working surfaces of the parts via the flow of the lubricating oil.

13

3

Share

How to activate the headlight washer on a Tiida?

After turning on the headlights, simply activate the windshield wiper switch. The steps for headlight removal and installation are as follows: 1. Open the front hood of the car, locate the bulb, and take a photo to record the installation position of the headlight. 2. Then firmly pull out the bulb power cord with the blue coil. Inside the blue circle is the bulb socket, which requires a bit of force to remove. Directly pull it out to expose the lamp base; the metal handle inside the red circle is the lever to release the bulb's metal clip. 3. At this point, you can see how the power cord is pulled out. Be sure to first remove the bulb socket, then release the bulb's metal clip lever. 4. Press down in the direction of the blue arrow and hold, then push to the right to loosen the headlight clip. Once loosened, simply pull out the bulb. 5. Next, open the box of the newly purchased bulb and install the new bulb. 6. Finally, secure the bulb clip, plug in the bulb power cord, and the installation is complete.

2

5

Share

Can a Two-Wheel Drive Vehicle Be Converted to Four-Wheel Drive?

A two-wheel drive vehicle can be converted to four-wheel drive. However, the conversion involves numerous modifications, not just replacing a transmission differential or installing a driveshaft. Even the wheel positions need to be altered. The cost is extremely high, so it is generally not recommended. Below is an introduction to four-wheel drive systems: 1. Full-Time Four-Wheel Drive: Full-time four-wheel drive means the vehicle maintains a four-wheel drive configuration throughout the entire driving process. The engine's torque is distributed to the front and rear wheels in a fixed ratio. This drive mode ensures excellent off-road and handling performance at all times, but it cannot adjust torque distribution based on road conditions and tends to have higher fuel consumption. 2. On-Demand Four-Wheel Drive: On-demand four-wheel drive uses a computer chip to control the switch between two-wheel and four-wheel drive. On normal roads, the vehicle operates in two-wheel drive mode. When encountering off-road conditions or wheel slippage, the computer detects and automatically distributes power to the other two wheels. For part-time four-wheel drive systems, the quality of the control program affects the intelligence of the drive mode switching.

13

0

Share

What is the L-type Electronic Fuel Injection System Like?

L-type electronic fuel injection system uses an air flow meter to directly measure the engine's air intake. The ECU does not need to estimate but can calculate the corresponding fuel injection amount based on the air flow meter signal, thus achieving more precise control of the air-fuel mixture concentration. Here is an introduction to the L-type electronic fuel injection system: 1. Working Principle: The flow-sensing gasoline injection system uses an air flow meter to directly measure the engine's air intake. The computer does not need to estimate but can calculate the corresponding fuel injection amount based on the air flow meter signal. 2. Differences between the L-type and D-type systems: The L-type system uses an air flow meter to directly measure the engine's air intake, resulting in higher control precision compared to the D-type system. The control method of the L-type system is also known as the mass flow control method, and most of its structure is similar to that of the D-type system.

9

1

Share

Is the Throttle Not Used in Subject Two of the Driving Test?

The tasks in Subject Two do not require the use of the throttle. Therefore, during regular practice, the instructor's car usually has the throttle locked, making it impossible for students to press it. Moreover, as beginners who have just started learning to drive, students are not yet capable of controlling the throttle's depth and the pressure applied accurately. Hence, Subject Two does not allow students to use the throttle. Some test vehicles may have weaker idling power, so during the hill start test, it might be appropriate to gently tap the throttle to give the car a little extra power. However, as a novice who has never used the throttle before, it is advisable not to touch it casually. Without a precise understanding of the throttle, improper control could easily cause the car to rush out of the test area, posing a threat to other personnel in the examination venue. The key to a successful hill start is: simultaneously press the clutch and brake—turn on the left turn signal—release the handbrake—slowly lift the clutch with your left foot (the slower, the better), until the car starts to vibrate slightly, then stop lifting the clutch—gradually release the brake with your right foot—once the car starts moving, continue to lift the clutch with your left foot while gently applying throttle with your right foot.

18

3

Share

Is a tire pressure of 280 normal for a Camry?

Does the Subject 2 Retest Start from the Beginning?

How are automotive engine oil grades classified?

How to activate the headlight washer on a Tiida?

Can a Two-Wheel Drive Vehicle Be Converted to Four-Wheel Drive?

What is the L-type Electronic Fuel Injection System Like?

Is the Throttle Not Used in Subject Two of the Driving Test?

What does the elephant on the overpass mean?

What Does Wheel Alignment Do?

What does it mean when the SET light is on?

What Causes the Handbrake Light to Stay On?