Is a Tire Pressure of 2.8 Too High?

1 Answers
DeLucia
07/29/25 11:51am
A tire pressure of 2.8 bar is considered high, and it is advisable to control the vehicle's driving speed accordingly. Hazards of Low Tire Pressure: Increases friction with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and may lead to veering, which are factors detrimental to driving safety; Increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; Reduces the functionality of the cord and rubber, leading to delamination or cord breakage, and excessive friction with the rim, causing damage to the bead area and abnormal wear; Multiplies the friction between the tire and the ground, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout; Increases tire body deformation, making the tire side prone to cracks, and generates flexing motion, leading to excessive heat, accelerating rubber aging, cord fatigue, and breakage, while also increasing the tire's contact area with the ground, accelerating shoulder wear. Methods to Address Insufficient Tire Pressure: If no damage is visible, simply inflate the tire to normal pressure and reset the tire pressure system; If inspection reveals a puncture, promptly drive to a tire shop for repair and then reinflate; If the tire pressure warning reappears after inflation without any punctures, it may be due to air leakage caused by a deformed rim. It is recommended to inspect and replace the rim if necessary.
Was this review help?
16
1
Share
More Forum Discussions

Can the Volkswagen Lavida have its ECU flashed?

Volkswagen Lavida can have its ECU flashed. Advantages of ECU upgrade: Upgrading the ECU provides a customized power enhancement for the car, bringing the engine's working conditions closer to the ideal state, unlocking the vehicle's hidden power and torque potential. At the same time, by improving combustion efficiency, it makes emissions cleaner and allows the engine to better coordinate with other components in the vehicle's driving system. A good ECU can optimize the engine's operating conditions, thereby extending the engine's lifespan. ECU upgrade can increase torque: For Volkswagen's naturally aspirated engines, if the flashing is done professionally, torque can be increased by up to 10%, with power gains typically under 10%. After flashing, low-speed torque performance will improve.
12
3
Share

What is the reason why BMW tires cannot be recognized?

BMW tires may not be recognized due to tire replacement. Simply have the repair shop use a computer to match them. Tire replacement indicators: There is usually a triangular mark on the sidewall of the tire. Following the direction indicated by the triangular mark on the sidewall, you can find small blocks on the tread indicating the wear limit. According to current regulations in China, tires should be replaced when the surface tread wears below 1.6 mm. The wear indicators on the tires are also set according to this standard. BMW markings: A set of numbers and letters is used to indicate the manufacturing date and quantity of the tire. For example, "98N08B5820" indicates the 5820th tire produced in Group B in August 1998. The production batch number is used to identify the age and storage time of the tire.
3
0
Share

What transmission does the Great Wall Haval H6 use?

Great Wall Haval H6 uses two types of transmissions in total, one is a 6-speed manual transmission, and the other is a 7-speed dual-clutch transmission. The Haval H6 is the flagship model of the Haval brand, with body dimensions of 4640mm in length, 1825mm in width, and 1690mm in height, and a wheelbase of 2680mm. In terms of power, the Haval H6 is equipped with two engines, one is a 1.5-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine. In terms of appearance, the Haval H6 presents an almost perfect body posture, using dynamic micro-curves to outline the side profile, creating a sharp and poised stance for the vehicle. The LED intelligent headlights and the wrapped wheel arch design are ultra-cool and dynamic, pursuing technology and futuristic appeal while maintaining a balance between grandeur and stability.
8
1
Share

What Causes the Chevrolet Cruze Gear to Get Stuck?

The reasons for the Chevrolet Cruze gear getting stuck are: 1. Pressing the clutch before releasing the throttle; 2. Mismatch between speed and gear; 3. Deformation of the transmission plate in the clutch pressure plate assembly. Manual transmission cars can rely on the clutch to compensate for the jerking caused by downshifting when the speed is too high, but this operation should not be used for a long time as it can easily damage the clutch. The Chevrolet Cruze is a compact car under Shanghai GM Chevrolet, with body dimensions of 4666mm in length, 1807mm in width, and 1460mm in height, and a wheelbase of 2700mm. In terms of appearance, the Cruze inherits the family-style large-mouth grille, with angular headlights on the full front end appearing very flamboyant. The strongly lined engine hood and integrated bumper, along with slightly exaggerated design, make the Cruze look passionate and full of vitality.
16
1
Share

What does increased battery discharge when parked mean for the BMW 7 Series?

BMW 7 Series increased battery discharge when parked indicates a possible circuit leakage or a battery life below 30%. Solutions for BMW's display of increased battery discharge when parked: First, check if any aftermarket installations are present, such as a dashcam connected to constant power and continuously operating. If there are no aftermarket installations, it is recommended to inspect the quiescent current; charge the vehicle's battery; if there are many electrical appliances in the vehicle, it is advisable for the owner to replace it with an original BMW battery, such as the 12V900A battery commonly used in the BMW 5 Series. Daily usage precautions: Avoid leaving the vehicle parked for extended periods to prevent battery drain and other issues. It is recommended to start the vehicle at least once every 15 days; avoid frequent short-distance driving to prevent the engine from adequately charging the battery, which could lead to battery depletion.
5
4
Share

What causes occasional jerking in BMW N52 engine?

BMW N52 engine occasional jerking may be caused by severe carbon deposits in the engine or aging engine components. Aging engine components: Car shaking is also related to worn engine mounts. Engine mounts are responsible for absorbing minor vibrations during engine operation. If the engine mounts fail, these vibrations will be transmitted to the steering wheel and cabin, causing shaking at idle. Severe engine carbon deposits: The most common cause of car shaking is excessive dirt on the throttle body or carbon buildup in the fuel injectors. When there is too much carbon deposit inside the engine, the gasoline sprayed by the cold-start injector will be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the engine will only start easily after the carbon deposits have absorbed enough gasoline. Once started, the gasoline adsorbed on the carbon deposits will be drawn into the cylinders by the engine's vacuum suction and burned, making the air-fuel mixture too rich. The engine's combustible mixture alternates between being too lean and too rich, causing jerking.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.