Is a tire pressure of 2.7 normal in summer?

1 Answers
SanDawson
07/30/25 3:12am
Summer tire pressure of 2.7 is not normal. According to the regulations and requirements of the international GBT2978-2008 standard, the standard tire pressure for standard tires is 2.4-2.5bar. A pressure of 2.7bar exceeds the maximum value of the standard tire pressure, so it is abnormal. Generally, the lower limit of the standard tire pressure for car tires is sufficient. For example, the lower limit for standard tires is 2.4bar. If the car is often parked outdoors, the tire pressure can generally be about 0.1bar lower than the standard to prevent tire blowouts due to high temperatures. Hazards of excessive tire pressure: The friction and adhesion of the tire will decrease, affecting braking performance; It can cause steering wheel vibration and deviation, reducing driving comfort; Accelerates localized wear of the tread pattern in the center of the tire, reducing tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Excessive stretching deformation of the tire cords reduces tire elasticity, increasing the load on the car during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, and impacts can cause internal cracks and blowouts, leading to tire failure.
Was this review help?
13
4
Share
More Forum Discussions

How to Test if an Electric Vehicle Battery Has Power?

Electric vehicle battery testing methods are as follows: 1. Check the battery's power indicator: When the power indicator shows green, it indicates the battery has sufficient power and is in good condition. When the power indicator shows black, it means the battery is low on power and needs charging. When the power indicator shows colorless or light yellow, it indicates the battery power is almost depleted. 2. Measure the battery's static voltage: The nominal voltage of a car battery is 12V, but the actual voltage is slightly higher. With the engine off, use a multimeter to measure the voltage between the positive and negative terminals, which should be between 12.5~12.8V. If the measured voltage is below 11.5V, it indicates the battery is in a low-power state. If the measured voltage is below 10.9V, it means the battery power is almost completely exhausted.
7
5
Share

How many kilometers can a run-flat tire drive without air?

Run-flat tires can drive approximately 80 kilometers without air. The main purpose of run-flat tires is to prevent the vehicle from losing control in the event of sudden tire pressure loss. Below is an introduction to run-flat tires: 1. Introduction to run-flat tires: Run-flat tires, technically known as "pressure-retaining tires," rely on the inflated tire sidewall as the main support for the vehicle's weight, especially for tires with a larger aspect ratio (the ratio of tire height to width), where the sidewall is very "thick." 2. The difference between run-flat tires and ordinary tires: The sidewall of run-flat tires is very thick, and the inflated tire sidewall is the main support for the vehicle's weight. 3. The structure of run-flat tires: Run-flat tires consist of an outer tire, a common inner tire, a spare inner tire, a steel rim, a gas generator, a pressure sensor, and a control unit. Run-flat tires have special symbols after the specifications on the tire sidewall, which ordinary tires do not have.
5
5
Share

Why is Fuel Consumption Increasing?

There are several reasons why a car's fuel consumption may increase: 1. Insufficient tire pressure. Insufficient tire pressure increases the contact area between the tires and the road, leading to greater friction and driving resistance, which in turn raises fuel consumption. 2. Faulty ignition coil: A faulty ignition coil can cause some cylinders to stop working, reducing power output. However, fuel injection continues as usual without contributing to performance, thereby increasing fuel consumption. Here are some tips to reduce fuel consumption: 1. Maintain proper tire pressure: Both underinflation and overinflation of car tires are problematic. Underinflation increases friction and accelerates wear, while overinflation raises the risk of tire blowouts and damages the shock absorbers. 2. Keep the battery fully charged: A weak battery results in weaker sparks from the spark plugs, reducing ignition energy and increasing fuel consumption. Therefore, ensure the battery is always adequately charged and recharge it promptly when needed.
15
4
Share

What is the actual fuel consumption of the Envision S?

The Envision S has a fuel consumption of 9.5 liters per 100 kilometers. The Envision S is a midsize SUV under the Buick brand, equipped with a 2.0-liter turbocharged engine. The engine code for the Envision S's 2.0-liter turbocharged engine is LSY. Here are some additional details: 1. Exterior: The Envision S measures 4662 mm in length, 1883 mm in width, and 1631 mm in height, with a wheelbase of 2779 mm. 2. Interior: The interior design of the Envision S is excellent overall, aligning with Buick's long-standing commitment to a premium brand image. The Envision S is the first in its class to feature a heated steering wheel, creating a 'warm hands, warm heart' driving environment for users.
3
1
Share

Does Crystal Coating Damage Car Paint?

Crystal coating does not damage car paint. Here are the benefits of car crystal coating: 1. Scratch Resistance: With a hardness of 6H, compared to the 2H hardness of ordinary car paint, it can prevent most minor scratches. It also has an elastic recovery function, protecting the vehicle from daily minor scratches and reducing paint scratches by more than 70% compared to ordinary coatings. When external force exceeds the elastic protection range of the coating, it usually only leaves scratches on the coating itself without damaging the paint. 2. Corrosion Resistance: The ultra-fine nano-crystal layer isolates the paint from the external environment, effectively preventing oxidation and resisting corrosion from bird droppings, insect residues, acid rain, etc. 3. No Cracking: It provides UV resistance, high-temperature and cold resistance, with a temperature range of -50°C to 300°C, adapting to wide temperature variations without cracking or peeling.
6
0
Share

What are the body dimensions of the Trumpchi GE3?

The length, width, and height dimensions of the Trumpchi GE3 are 4337mm/1825mm/1658mm, which are official data. The length of the Trumpchi GE3 refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The permanent magnet/synchronous motor of the Trumpchi GE3 has a maximum power of 132kW and a maximum torque of 290 Nm. The battery type is a ternary lithium battery, and the motor is matched with a fixed gear ratio transmission. The state has relevant regulations on vehicle dimensions. According to the national standard "GB1589-89" issued, the total width of a vehicle does not include rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, in the national standard, the significance of vehicle width data is to ensure sufficient space during overtaking, avoiding accidents due to excessive width or situations where road markings are narrower than the vehicle width. Additionally, the state stipulates that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.