Is a tire pressure of 195 kPa normal in cold weather?

1 Answers
McHaven
07/30/25 5:15am
A tire pressure of 195 kPa in winter is not normal. A pressure of 195 kPa is too low for winter, as it can easily damage the tire or cause a blowout. Due to thermal expansion and contraction, it's acceptable to have slightly higher tire pressure in winter compared to summer. Safe tire usage is crucial for driving, and most vehicles are equipped with tire pressure monitoring systems, so it's important to pay attention to it while driving. Hazards of overinflated tires: Reduced friction and adhesion of the tire, affecting braking performance; Causes steering wheel vibration and drifting, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overstretches the tire cords, reducing elasticity and increasing the load on the tire during driving; Decreases puncture resistance. Sharp objects like nails or glass can easily penetrate the tire, causing internal cracks or blowouts. Hazards of underinflated tires: Increases friction with the road surface, leading to higher fuel consumption; Causes heavy steering and drifting, compromising driving safety; Increases movement of tire components, leading to excessive heat generation from over-flexing; Weakens the cords and rubber, causing delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; Dramatically increases friction with the ground, raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving can lead to blowouts; Increases tire deformation, causing sidewall cracks and excessive flexing, leading to overheating, rubber aging, cord fatigue, and breakage, while also enlarging the tire's contact area and accelerating shoulder wear.
Was this review help?
18
3
Share
More Forum Discussions

What Causes the Corolla's Locking Horn Not to Sound?

Corolla's locking horn not sounding is usually caused by the vehicle not being locked or the anti-theft system's battery running out. Here are the relevant details: Reasons why the locking horn does not sound: The vehicle is not locked, and the anti-theft system will only work after locking; the movement is slight, and lightly touching the vehicle will not activate the anti-theft system; the anti-theft system's battery is depleted, and replacing the power source will solve the issue; the anti-theft system is damaged, such as a short circuit in the circuit, and requires repair at a service center. Activating the locking horn: Locking and unlocking are divided into hazard light indicator and horn modes. By simultaneously pressing the lock (LOCK) and unlock (UNLOCK) buttons on the smart key for more than 2.5 seconds, the hazard light will flash once, and the horn will sound once, indicating that the horn mode has been activated.
4
0
Share

What are the precautions for overtaking a car?

Here are the precautions for overtaking a car: 1. Observe the road conditions: Before overtaking, observe the road conditions ahead and try to choose a flat and straight road. Before overtaking, observe the situation of the lane you intend to use. Check the left rearview mirror to see if there is a car behind you attempting to overtake. Wait for the car behind to complete its overtaking maneuver before proceeding with your own. 2. Use of lights: When the conditions for overtaking are met, turn on the left turn signal, then alternately flash the high and low beams and honk the horn to alert the car in front. Confirm that the car ahead has signaled to yield before turning left. 3. Driving in the borrowed lane: If you are already in the borrowed lane, downshift and press the accelerator deeply to increase the engine speed and boost power. The reason for downshifting is that when accelerating, downshifting and pressing the accelerator provides a quicker response, allowing for faster acceleration.
13
4
Share

Why don't 4S shops allow the installation of cruise control?

When purchasing a vehicle, some owners request 4S shops to install cruise control functionality, but some 4S shops advise against it. This is because installing a cruise control system differs from installing other vehicle accessories. The cruise control system needs to be connected to the engine control circuit, car airbags, and the central console. Such modifications can alter the original vehicle's circuitry and wiring, and improper installation may even damage the car. Cruise control systems, also known as speed control systems or autonomous driving systems, function by automatically maintaining the speed set by the driver without the need to press the accelerator pedal, allowing the vehicle to travel at a constant speed. Drawbacks of cruise control systems: They may malfunction, which can be extremely dangerous during high-speed driving. Cruise control is only suitable for use on highways or long-distance routes with light traffic and cannot be used on roads with complex conditions. When using cruise control, the driver's foot is freed from the accelerator pedal, leading to relaxation and reduced concentration. In emergency situations, this may delay braking response, resulting in untimely braking.
20
4
Share

What gear should an automatic transmission tow truck use?

An automatic transmission tow truck should be in N (Neutral) gear. Below are some relevant introductions about tow trucks: 1. The meaning of a tow truck: The full name of a tow truck is a road clearance vehicle, also known as a tow truck, road rescue vehicle, or towing vehicle. It has multiple functions such as lifting, pulling, and towing. Tow trucks are mainly used for road breakdown vehicles, urban traffic violation vehicles, and emergency rescue operations. 2. Precautions for towing: The color of the tow truck should be bright, preferably a warning color that can alert others. Reflective strips can be applied during night towing to remind passing vehicles. During towing, it is necessary to maintain good communication with the vehicle being towed, requiring close coordination between the two vehicles to control a safe distance. The tow rope should not be too short, as the vehicle being towed already has issues. If the tow rope is too short, sudden braking can easily lead to a rear-end collision between the two vehicles.
3
0
Share

What car has a dragonfly logo?

The car with a dragonfly logo is Qiantu, a Chinese independent new energy sports car brand. Here is more information about Qiantu: 1. Positioning: Qiantu Automobile focuses on the design, development, production, sales, and service of pure electric vehicles. The company is committed to creating fun-to-drive pure electric vehicles for more consumers through forward-looking design, an open intelligent connectivity platform, lightweight materials, and modular electric drive technology. 2. K50 Powertrain: The K50 is the first model launched by Qiantu Automobile since its establishment, featuring a dynamic side profile, unique colors, and a lightweight body. The front and rear dual-motor four-wheel-drive system delivers a peak output of 320KW and 680Nm, with a 0-100km/h acceleration time of just 4.6 seconds.
1
4
Share

What is the process for selecting a car license plate number online?

Below is the detailed process for selecting a car license plate number online: 1. Log in: Visit the Ministry of Public Security's Internet Traffic Safety Comprehensive Service Management Platform, locate the "New Vehicle Registration Pre-selection of License Plate" option under the "Motor Vehicle Services" section, and click the "Online Processing" link. 2. Enter basic information: After clicking the "Submit Information" button, proceed to the basic information step. The vehicle owner should select the vehicle management office where they or their organization will handle the new vehicle registration. In the "Confirm Information" step, the owner needs to input the new vehicle's identification code and the selection voucher. After confirming the accuracy of the information, click the "Submit" button in the dialog box. Once the system verifies the information, it will proceed to the "License Plate Selection Service Instructions" step. 3. Pre-select a license plate: After carefully reading the service instructions, click the "Start Selection" button to begin the selection process. First, identity verification is required. The owner must obtain and enter an SMS verification code to verify the phone number used for pre-selecting the license plate. After obtaining and entering the SMS verification code, wait for the countdown of the "Confirm" button at the bottom of the interface to end, then click the "Confirm" button to verify if the SMS code is correct. Upon successful verification, the process moves to the "Pre-select License Plate" step.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.