···
Log in / Register

Is a tire pressure of 1.4 bar indicating a puncture?

4 Answers
Johnson
08/30/25 4:36am

A tire pressure of 1.4 bar might be caused by a nail puncture or other reasons leading to air leakage. It is recommended to first check if there is a nail in the tire, reinflate it, and observe whether it loses air quickly. If the air loss is rapid and no nail is found, visit a service station when possible to diagnose the issue. Risks of overinflated or underinflated tires: For tires, the pressure should neither be too high nor too low. Overinflation reduces the contact area between the tire and the ground, leading to poor grip, which affects the vehicle's handling and driving stability. Underinflation can cause wave-like deformation during high-speed driving, reducing the tire's lifespan and increasing the risk of a blowout. Standard tire pressure guidelines: According to the international GBT2978-2008 standard, the recommended tire pressures are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar.

Was this review help?
12
1
Share
VonJordan
09/11/25 8:33am

I've been driving trucks for a long time and know quite a bit about tire pressure. Normal tire pressure usually ranges between 2.2 to 2.5 bar, so your 1.4 bar is definitely too low – it feels like the tire is leaking. If there's a puncture, you can usually spot a nail or hole, or hear unusual noises from the tire. I suggest you stop driving immediately, pull over somewhere safe, and try spraying soapy water on the tire surface. Bubbles will indicate the leak point. Even if you don't have professional tools, temporarily inflating the tire to drive short distances is risky. Long-term low-pressure driving can deform the tire, cause excessive wear, and increase the risk of a blowout. Safety first – don't delay, check it right away or find a repair shop to fix the puncture.

Was this review help?
14
4
Share
Expand All
AlessandraDella
10/26/25 2:37am

As someone who frequently drives long distances, I've experienced quite a few tire pressure changes. 1.4 bar sounds alarming - normal car tire pressure is usually over 2.0, so this low reading is likely due to a puncture, like from a nail. Temperature drops might lower pressure slightly, but never this drastically to 1.4. If your car feels wobbly or unstable while driving, it's definitely an air leak. Quickly inspect the tire surface for foreign objects or listen for hissing sounds to locate the leak. Remember, driving with low pressure wastes fuel and is dangerous, especially on highways. Best to visit a tire shop immediately for inspection - don't delay.

Was this review help?
10
4
Share
Expand All
VonJace
12/09/25 2:57am

I see your tire pressure is only 1.4 bar, which is definitely too low. The normal level should be above 2.2. It might be caused by a puncture and air leakage, or possibly issues with the valve or rim. In any case, you need to check it immediately. Driving with low pressure is very dangerous—tires can overheat and burst, leading to loss of control and skidding, especially when braking on curves. Pull over to a safe spot right away and inspect the tire's appearance or perform a simple inflation test to locate the leak. If you don’t have the tools, don’t risk driving—call for roadside assistance or a tow truck to get it fixed. Safety is more important than saving money. Ignoring such a small issue can lead to major hazards.

Was this review help?
19
2
Share
Expand All
More Forum Discussions

How to set the automatic folding of the rearview mirror for Audi Q5?

Audi Q5 sets the automatic folding of the rearview mirror as follows: 1. Press the vehicle's one-button start button to start the vehicle engine; 2. Locate the control unit for the vehicle's rearview mirror in the driver's compartment; 3. The rearview mirror knob can be rotated left and right to achieve different functions; 4. Rotate the top button to activate the automatic folding function of the rearview mirror. To achieve excellent driving performance, the Audi Q5 is equipped with a power distribution system that allocates 40% of the driving force to the front axle and 60% to the rear axle. It uses a quattro transmission, a 6-speed manual transmission, and a Stronic 7-speed dual-clutch transmission. The driving force is distributed through a self-locking central differential, and the torque is transmitted to the front axle differential via the drive shaft and to the rear axle transmission via the propeller shaft.
19
5
Share

Will a Damaged Canister Purge Valve Significantly Increase Fuel Consumption?

Damaged canister purge valve will significantly increase fuel consumption, and secondly, the engine power will decrease. Symptoms of a damaged valve: If the canister purge valve of a car's activated charcoal canister is damaged, it will prevent the canister from opening and closing properly, directly leading to increased fuel consumption. Under non-idle conditions, you may occasionally hear abnormal noises. When pressing the accelerator to speed up, the vehicle's idle speed will fluctuate, and acceleration will feel sluggish. These are all symptoms of a damaged canister purge valve. Function of the car's charcoal canister: The charcoal canister in a car utilizes the adsorption properties of activated charcoal to collect fuel vapors and prevent waste. The canister purge valve opens when the car starts, releasing the adsorbed fuel vapors into the intake manifold to be burned in the engine.
13
4
Share

Which is more durable, the Baojun 510 AMT or CVT?

In terms of reliability, both perform well, but the CVT offers a significantly better driving experience compared to the AMT transmission. The AMT transmission has noticeable gear shift jerks and relatively chaotic shift logic, making its overall performance inferior to the CVT. Introduction to the Baojun 510 automatic transmission: 1. Lightweight design: The total weight of this transmission is 90KG, which is considered mainstream in its class. To ensure compatibility with more vehicle models, designers minimized its overall size. For example, the oil pump is built-in and uses an electric pump, eliminating the need for metal components like drive gear chains. 2. Torque converter lock-up optimization: This CVT transmission can lock the torque converter at lower speeds, thereby improving the overall transmission efficiency. This not only reduces emissions but also effectively saves fuel. However, whether this approach will cause jerking remains to be seen over time.
5
4
Share

What is the difference between long-distance buses and large buses?

The differences between long-distance buses and large buses include their purposes, specifications, and road conditions they operate on. Different purposes: Large buses are commercial vehicles specifically designed and equipped for urban and suburban transportation; they are mainly used for long-distance travel or collective outings organized by institutions. Long-distance buses, on the other hand, operate periodically between two county-level (excluding municipal districts) or higher administrative regions. Different specifications: Large buses generally have a length of over 9 meters and more than 20 seats; they are not equipped with toilets. Long-distance buses typically have more than 16 seats and often come with small toilets. Different road conditions: Large buses operate on roads designed for public transportation, often traveling through urban and suburban areas. Long-distance buses, because they frequently need to travel between distant regions, mostly operate on highways.
16
2
Share

Where is the cabin air filter located in a 2013 BMW 525?

2013 BMW 525's cabin air filter is located inside the glove compartment on the passenger side. Additional information about the air conditioning system: 1. Introduction: The automobile air conditioning system, abbreviated as car AC, is designed to regulate and maintain optimal temperature, humidity, air cleanliness and airflow within the vehicle cabin. It provides passengers with a comfortable environment to reduce travel fatigue, while creating favorable working conditions for drivers and serving as a crucial ventilation device for safe driving. 2. Configuration: Different types of AC systems have varying layouts. Modern passenger vehicles commonly use integrated heating and cooling systems. These systems combine components such as the evaporator, heater core, centrifugal blower, and control mechanisms into a single assembly called the AC unit.
8
5
Share

What is the Key to Assessing Damage After a Vehicle is Flooded?

The key to damage assessment is on-site inspection. On-site inspection is required: In cases such as flooded vehicles, it is necessary to understand the situation clearly at the first moment and avoid restarting the vehicle. Additionally, you need to verify whether you have insurance coverage and if it falls under the insurance liability. Disassembly and damage assessment: Generally, after a vehicle has been flooded, effective measures must be taken promptly. This emphasizes timeliness, including quick cleaning, rapid disassembly and inspection, and swift damage assessment. Communication: Communication facilitates effective interaction between the policyholder and the insurance company, making the insurance process smoother. It also provides confidence to policyholders, helping them better understand the services and related matters they expect, thereby safeguarding their legitimate rights and interests.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.