Is a Test Required for Upgrading from Motorcycle E License to D License?

1 Answers
CodyDella
07/29/25 2:55am
Motorcycle E license upgrading to D license requires a test. The details are as follows: 1. Test: Divided into 4 subjects, including regulation training, internal road test, special road section test, and safe driving question test. If the applicant holds a driving qualification other than a motorcycle, they must have held it for at least one year before they can upgrade to a motorcycle license. 2. Relevant regulations: According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" issued by the Ministry of Public Security, the driving license has reached the upgrade period, but must also meet the following requirements: The applicant must already hold a motor vehicle driving license and apply for an additional permitted driving model, and must have no full score record in this scoring cycle and the most recent scoring cycle before the application.
Was this review help?
20
3
Share
More Forum Discussions

What is the ground clearance of the Trumpchi GS4?

According to official data, the minimum ground clearance of the Trumpchi GS4 is 1900mm. Owners can check the vehicle's user manual, where it is specified in the parameter configuration section. The ground clearance and minimum ground clearance of a car are not the same concept. Here is some relevant information: 1. The ground clearance value of a car is not fixed and depends on the load condition. 2. Under the rated full-load condition, the distance between the most prominent part of the car's chassis and the horizontal ground is called the minimum ground clearance of the car. The minimum ground clearance determines the car's passing ability. 3. The greater the ground clearance of a car, the stronger its passing ability, but the worse its stability. Conversely, the smaller the ground clearance, the worse the passing ability, but the higher the stability.
1
2
Share

How to Cancel the Tire Pressure Warning on the Bora?

To eliminate the tire pressure warning on the Bora, follow these steps: 1. There is a tire monitoring indicator button on the central console. After the system issues a low tire pressure warning, the vehicle must remain stationary for about one minute. Do not move the car or turn off and restart the ignition switch until pressing the button to recalibrate the tire monitoring indicator. 2. Find the tire pressure reset option in the settings on the central display. If the above methods do not work, it is necessary to visit a 4S shop to eliminate the tire pressure warning. The reasons for the tire pressure warning light to illuminate are as follows: 1. The pressure in one or more tires is significantly lower than the set pressure, or the tire structure is damaged. Additionally, the system will emit a warning sound, and the combination instrument display may show a corresponding text message. 2. System malfunction, the indicator light remains on.
10
0
Share

What car has a logo with five sticks?

The car with a logo featuring five sticks is WM-Motor. 'WM' is the abbreviation of the German word 'Weltmeister,' which means world champion, signifying WM-Motor's ambition to produce intelligent vehicles of 'world champion' caliber. Here is some relevant information about WM-Motor: 1. The WM-Motor logo consists of five vertical lines, each representing cloud services, platforms, people, vehicles, and multi-channel operations. These five elements embody WM-Motor's production and sales philosophy, with the five lines continuously interacting and interconnecting. 2. WM-Motor specializes in manufacturing new energy vehicles and was established in January 2015. The company originated from an electric powertrain system R&D enterprise founded by co-founder Du Ligang in 2012.
10
4
Share

How to adjust the height of the seat in Baojun 510?

Baojun 510 features a 4-way electric seat adjustment. Simply press the button located below the left side of the driver's seat to adjust the seat height up and down. Here is some information about the Baojun 510: 1. The Baojun 510 is positioned as a compact SUV, adopting a new family-style design. The headlights feature a split layout, with slim and sharp LED daytime running lights on top and hexagonal headlights below for low and high beams. 2. The side of the car features a high waistline design, and the currently popular floating roof is also applied. The new car measures 4220mm in length, 1740mm in width, 1615/1625mm in height, with a wheelbase of 2550mm.
6
3
Share

What to do if the steering wheel is still off-center after wheel alignment?

If the steering wheel is not straight after wheel alignment, it is definitely necessary to seek professional help from an auto repair shop or a 4S store, as this issue cannot be resolved on your own and requires the support of mechanical equipment. You can try performing wheel alignment and wheel dynamic balance again. It is also necessary to check the tire pressure. The following are the reasons for an off-center steering wheel: 1. After a period of use, the steering wheel may become off-center, which can be related to tire pressure, tire wear, wear of various chassis components, and wheel alignment. You can first measure the tire pressure on both sides. When the tire pressure on both sides is inconsistent, the vehicle will tend to drive towards the side with lower pressure. If the tread wear on the two front tires is inconsistent, it can also cause the vehicle to pull to one side. 2. If there are no issues with the tires, it is recommended to visit a 4S store to check the condition of the chassis components. Changes in wheel alignment values can also cause the steering wheel to become off-center after a period of use. Additionally, it could be due to the tie rod shifting to one side, resulting in an off-center steering wheel.
15
3
Share

How to Remove Snow from a Car

First, start the car and turn on the heater to blow warm air onto the front windshield. Then, use a brush or towel to remove the snow. If there is ice, residues can be cleared using tools like an ice scraper or plastic scraper. Only after the snow is mostly removed and the ice on the windshield has melted should the wipers be used normally. Below is information on removing snow from cars: 1. The first scenario is loose snow. Loose snow refers to the layer of snow that falls on the car's surface without an underlying layer of ice. This type of snow is the easiest to remove. Use a soft cloth or a gentle broom to sweep the loose snow away, always moving in the same direction. Never activate the wipers before clearing the snow. Snow on the car body doesn’t need to be removed immediately—if it’s loose snow, it will naturally melt away once the car is started. 2. The second scenario involves a thin layer of ice beneath the snow. This situation is more challenging to handle. First, do not use the wipers. If the ice layer on the glass is thick, use a rubber or hard glass scraper to gently scrape it off, preferably moving in one direction. Specialized snow removers are now available for better results. Additionally, use a soft broom to gently scrape the side mirrors in one direction until the ice fragments are removed. 3. The third scenario is when the car is covered in thick frost and ice. Some car owners might be tempted to use warm water to melt the ice, but this method is not advisable as it can deform the windshield and wipers or even damage the wipers directly. For thick ice layers, it’s recommended to use professional antifreeze windshield fluid sprayed onto the glass, followed by a rubber scraper to remove the ice. In most cases, the ice will slide off on its own. The same method can be used to remove ice from other parts of the car. Starting the engine and setting the air conditioning to heat, with the airflow directed to the "windshield" setting, can also help remove ice more easily.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.