Is a Roof Box on a Sedan Illegal?

1 Answers
DeAngelina
07/29/25 5:12pm
Installing a roof box on a sedan is not illegal. Relevant information is as follows: 1. Note: Regulations stipulate that for passenger cars, the height of cargo loaded on the roof rack must not exceed 0.5 meters from the top of the car, and the total height from the ground must not exceed 4 meters. If either of these limits is exceeded, the driver may be fined by traffic police. 2. Introduction: A roof rack is a device installed on the roof of a car for carrying items, thereby increasing the interior space. Roof racks are convenient for carrying a large number of items when traveling. 3. Effect: Installing a roof rack increases the vehicle's wind resistance, which in turn increases fuel consumption. Therefore, if it is not used for a long time, the roof rack should be removed. Roof racks are suitable for mid-sized and large vehicles such as commercial vehicles and SUVs.
Was this review help?
5
2
Share
More Forum Discussions

What are the precautions for driving on highways in summer?

Here are the precautions for driving on highways in summer: 1. Do not drive in slippers: In summer, many drivers prefer to wear sandals while driving, especially some female drivers who like to wear sandals with heels or even slippers. In case of an emergency, this can easily lead to operational errors and cause accidents. 2. Avoid over-inflating tires to prevent blowouts: On highways, the ground temperature in summer is very high, and continuous friction with the road further increases tire temperature, making blowouts and subsequent accidents more likely. 3. Refill the radiator promptly if it runs low on water: While driving, if a large amount of white smoke suddenly emerges from the front of the car, the driver must pull over immediately. This is a typical symptom of a low radiator water level. The issue can be quickly resolved by adding water, such as bottled water, to the radiator. During hot weather, extra attention should be paid to the water and oil systems of the vehicle.
15
0
Share

How to manually reset the maintenance light on a 2017 Borgward BX5?

Normally, the maintenance light will automatically reset after servicing is completed. If manual reset is required, keep the engine off and long-press the scroll wheel on the right side of the steering wheel. The Borgward BX5 is a compact SUV. Its core selling points include a sporty appearance, ample power, and intelligent safety features. Here's an introduction to the Borgward BX5: 1. In terms of exterior design, the Borgward BX5 adopts a youthful and dynamic style. The tension-filled front design, combined with the fastback rear, further amplifies the vehicle's sporty elements. 2. The Borgward BX5 features an eagle-wing style wraparound cockpit layout, creating an immersive driving atmosphere. Additional comfort features include an electric panoramic sunroof, a floating smart touchscreen infotainment system, a class-leading 2685mm wheelbase, and generous storage space, all of which enhance passenger comfort during travel.
16
1
Share

What are the disadvantages of installing welcome lights?

The disadvantages of installing welcome lights are that the car is prone to safety hazards caused by circuit overload, and the installation process involves circuit modifications, which may also pose safety risks. Definition of welcome lights: When the driver or passenger is about to get into the car, the moment the door is opened, the door bottom light is turned on. When the engine is turned off and the door is pushed open, the welcome light is instantly illuminated to light up the ground. When the door is closed, it instantly turns off. From the whole process, the term welcome light is quite appropriate. Function of welcome lights: The first function of car welcome lights is to showcase the noble temperament of the brand, and the second function is to illuminate the path near the door for passengers, giving them a feeling of being at home.
15
0
Share

What are the causes of excessive fuel injection pulse width?

There are two main reasons for excessive fuel injection pulse width. Caused by car idling: Excessive fuel injection pulse width is generally related to idling. If the idling speed is high and the pulse width is large, it is usually caused by inaccurate signals from the throttle position sensor or coolant temperature sensor. If the idling speed is normal, then it is due to a faulty oxygen sensor. Caused by data: Inaccurate closed-loop data received by the ECU can also lead to this issue. The primary data involved includes signals from the oxygen sensor and coolant temperature sensor, though the intake pressure sensor and throttle position sensor should not be ruled out. You can purchase a Bluetooth OBD scanner and install software to check various parameters of the vehicle, or have a professional at a testing station re-examine the data.
20
4
Share

What to Do About Frequent Drowsiness While Driving?

The solutions for frequent drowsiness while driving are: 1. Drink a cup of coffee before driving and avoid driving while fatigued; 2. Use toothpaste with a fragrant scent to brush your teeth, wash your face with cold water, avoid staying up late, and maintain a relaxed mood. The precautions while driving are: 1. Maintain a good driving mindset; 2. Strictly adhere to traffic regulations; 3. Control the steering wheel properly during driving; 4. Perform car maintenance before departure; 5. Drive slowly when reversing. The methods to maintain a safe distance while driving are: 1. When the lower edge of the rear wheel of the car in front aligns with the lower edge of the windshield, the distance is about 3 to 5 meters; 2. When the lower edge of the front car's bumper aligns with the lower edge of the windshield, the distance is about 2 meters; 3. When the upper edge of the front car's bumper aligns with the lower edge of the windshield, the distance is about 0.5 to 1 meter.
12
2
Share

What is the engine fuel supply system composed of?

The engine fuel supply system is composed of auxiliary devices such as the fuel tank, fuel filter, fuel pump, oil-gas separator, fuel pipes, and fuel gauge. The normal fuel pressure of an engine is between 300 to 350 kilopascals. A fuel pressure gauge is used to measure the pressure of the fuel supply system, assess the working condition of fuel system components like the electric fuel pump and fuel pressure regulator, and serves as a specialized tool for inspecting and diagnosing faults in the fuel system. The method for using the engine fuel pressure gauge is as follows: 1. Start the engine and run it until it reaches normal operating temperature; 2. Turn off the car and wait for the engine to stop running, then remove all spark plugs; 3. Fully open the throttle and press the gauge's connector tightly onto the spark plug hole; 4. Use the starter to rotate the engine at 100 to 150 revolutions for 3 to 5 seconds; 5. The pointer on the gauge will gradually rise and stop at a certain value, which indicates the engine's fuel pressure.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.