Is a residence permit still required to obtain a driver's license in Foshan?

What brand is the less-than sign car logo?

The less-than sign car logo may belong to Soueast Motors and Lexus. Soueast Motors logo: The 'Peng Bird' logo of Soueast Motors is formed by the transformation of the initials 'S' and 'E' from 'SOUTH' and 'EAST', symbolizing Soueast Motors. The design of the 'Peng Bird' with its head raised and wings spread, ready to take flight, represents the vigorous and strong enterprising spirit and capability of Soueast Motors. The elliptical outline symbolizes an endless sense of energy. Overall, the design of the logo aligns with Soueast Motors' corporate philosophy of 'Soaring from the Southeast, Traveling the World', giving consumers a visual impression of high taste and prestige. Lexus logo: The Lexus logo appears as the letter 'L' enclosed in an oval. The 'L' is derived from the first letter of 'Lexus', and the oval represents the Earth, signifying Lexus' global presence.

6

0

Share

Can Small Car Tires Be Replaced with Larger Tires and Rims?

Small car tires can be replaced with larger tires and rims. Pay attention to tire pressure: Both overinflation and underinflation can cause abnormal tire wear, shortening the tire's lifespan. During the harsh winter and summer seasons, adjust the tire pressure periodically based on the recommendations of the maintenance service station. Avoid sudden acceleration: Daily driving should avoid sudden acceleration. Rapid starts from a standstill cause intense friction between the tires and the road surface, accelerating tread wear. Reduce sudden braking: Sudden braking behavior increases localized tread wear and can lead to tire bulging or delamination. Use coasting to decelerate more often and minimize the use of brakes, especially emergency braking. Drive at a steady speed: Maintain an appropriate speed and drive steadily to avoid or reduce the need for emergency braking, thereby minimizing tire wear. When stopping during a trip or at a station, develop the habit of safely coasting to a stop.

6

3

Share

Do family cars require two inspections per year after 10 years?

Family cars require one inspection per year after 10 years, and inspections every six months after exceeding 15 years. Regulations on vehicle inspections: For newly purchased vehicles within 6 years, they are exempt from physical inspection twice (inspection marks need to be applied for every two years without requiring the vehicle to undergo on-site testing); At the 6th and 8th years, the vehicle must undergo on-site testing. For private vehicles over 10 years old, the original inspection cycle still applies: one inspection per year for vehicles aged 10 to 15 years, and inspections every six months for vehicles over 15 years old. Vehicle owners can apply for the inspection mark at the local vehicle management office within three months before the expiration of the current inspection period. About vehicle annual inspection: Vehicle annual inspection refers to a mandatory test for all vehicles that have obtained official license plates and registration certificates. It is equivalent to an annual physical examination for vehicles according to the "Technical Conditions for Motor Vehicle Operation Safety." Vehicle annual inspections can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents.

18

3

Share

What are the differences between Castrol A3 and A3B4 engine oils?

Grades starting with 'A' denote specifications for gasoline engine oils, currently divided into four levels: A1, A2, A3, and A5. Grades starting with 'B' denote specifications for light-duty diesel engines, currently divided into five levels: B1, B2, B3, B4, and B5. Castrol A3: ACEA (Association des Constructeurs Européens d'Automobiles) is the specification set by the European Automobile Manufacturers' Association. The predecessor of ACEA was the Committee of Common Market Automobile Constructors (CCMC), which had similar functions. ACEA revises automotive lubricant specifications every two years, with some standards aligning with API. In the ACEA system, two-character groups are used to classify the quality of engine oils for gasoline and diesel vehicles. Grades starting with 'A' denote specifications for gasoline engine oils, currently divided into four levels: A1, A2, A3, and A5. Castrol A3/B4: A3B4 is the engine oil grade certification by ACEA, the European Automobile Manufacturers' Association, which imposes higher technical requirements compared to API. A3 is equivalent to API's SM grade for semi-synthetic and fully synthetic gasoline engine oils, while B4 indicates that the oil is suitable for both gasoline and diesel engines, with B4 being equivalent to API's CH-4 grade. A3B4 is the engine oil grade certification by ACEA, the European Automobile Manufacturers' Association, which imposes higher technical requirements compared to API. A3 is equivalent to API's SM grade for semi-synthetic and fully synthetic gasoline engine oils, while B4 indicates that the oil is suitable for both gasoline and diesel engines, with B4 being equivalent to API's CH-4 grade.

14

5

Share

What is the general length of a motorcycle?

There are many types of motorcycles, and the body length varies depending on the brand and model. Generally, the length of most common motorcycles is around 2 meters. Larger models may exceed 2 meters, while smaller ones are close to 2 meters. Except for some special, particularly large or small models, most motorcycles are approximately 2 meters in length. Two-wheeled motorcycles: Two-wheeled motorcycles come in two types: off-road and road models. Off-road motorcycles are usually equipped with a single-cylinder gasoline engine, with a cylinder displacement typically ranging from 125 to 400 milliliters. On good roads, they can reach speeds of up to 150 kilometers per hour. These motorcycles are versatile and can be modified for use as off-road racing bikes. Road motorcycles generally feature 2 to 4-cylinder gasoline engines with displacements exceeding 400 milliliters. On highways, these motorcycles can achieve speeds of up to 200 kilometers per hour, making them suitable for long-distance travel. They can also be used as high-speed road racing bikes. Motorcycle types: Motorcycles do not have a standard length; the type of motorcycle is determined by engine displacement rather than body size. Just as the type of driver's license for passenger cars is determined by the number of seats rather than the car's size or engine displacement, motorcycles with an engine displacement of 50cc or less are classified as light motorcycles, while those between 50cc and 250cc (inclusive) are considered large motorcycles. Light motorcycles are not allowed to carry passengers and are limited to single riders, with a maximum capacity of one person. Large motorcycles can carry passengers, with a maximum capacity of two people.

12

1

Share

What are the reasons for the inability to shift into third gear in the transmission?

The reasons for the inability to shift into third gear in the transmission are as follows: Whether the half-shaft is broken: If the car does not move when a gear is engaged, it is a functional comprehensive fault involving the clutch, transmission, and drive axle. During diagnosis, the fault location should be determined first, and the condition of both wheels can be checked initially. The diagnostic sequence generally starts from the drive wheels, moving forward through the rear axle to the drive shaft, then to the transmission, and finally to the clutch. If the drive shaft rotates but the car does not move forward, the fault lies in the rear axle. Lift the rear axle and rotate one rear wheel. If the other rear wheel rotates in the opposite direction but the drive shaft does not follow, it indicates that all rivets of the differential bevel gear are sheared. If the other rear wheel does not rotate, the half-shaft should be disassembled and inspected for breakage. Engaging a gear to start, but the drive shaft does not rotate: If the car is started in a certain gear but the drive shaft does not rotate, the fault lies in the transmission. Remove the transmission cover and inspect whether the transmission shift fork is broken or if the guide block fixing screws are loose. If the above checks are normal, proceed with a gear engagement test. If the second shaft does not rotate in a certain gear, it means the half-round key of that gear is sheared. If the second shaft rotates in direct drive but does not rotate in other gears, it indicates that the support bearings at both ends of the intermediate shaft have collapsed, causing the intermediate shaft to drop. The drive shaft does not rotate in any gear of the transmission: If the drive shaft does not rotate in any gear of the transmission, the fault lies in the clutch. Check whether the clutch is severely slipping, whether all the spline teeth of the driven plate hub are sheared or the steel plate is broken.

10

4

Share

Is a residence permit still required to obtain a driver's license in Foshan?

What brand is the less-than sign car logo?

Can Small Car Tires Be Replaced with Larger Tires and Rims?

Do family cars require two inspections per year after 10 years?

What are the differences between Castrol A3 and A3B4 engine oils?

What is the general length of a motorcycle?

What are the reasons for the inability to shift into third gear in the transmission?

How to Adjust Citroën Rearview Mirrors?

Is Wuji a Joint Venture Car?

What is required for motorcycle registration?

Is Applying Clear Coat Effective for Headlight Restoration?