Is a Residence Permit Required for Taking the Driver's License Test in Jiaozuo?

1 Answers
DeCameron
07/30/25 6:41am
For non-local students in Jiaozuo, a temporary residence permit with at least one year of local validity is required. Local students in Jiaozuo can use their original ID card. The following are the requirements for taking the driver's license test in a different location: Non-local applicants can take the test for a C1 or lower-class driver's license with a temporary residence permit valid for more than one year. For B2 or higher-class driver's licenses, the test must be taken in the applicant's registered residence location. Below is extended information on the conditions for taking the driver's license test: 1. Applicants for small cars, small automatic transmission cars, or light motorcycles must be between 18 and 70 years old. 2. Applicants for low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery must be between 18 and 60 years old. 3. Applicants for city buses, medium-sized passenger cars, large trucks, trolleybuses, or trams must be between 21 and 50 years old. 4. Applicants for tractor-trailers must be between 24 and 50 years old. 5. Applicants for large passenger cars must be between 26 and 50 years old. 6. For large passenger cars, tractor-trailers, city buses, medium-sized passenger cars, large trucks, trolleybuses, or trams, the applicant's naked or corrected visual acuity must reach 5.0 or above on the logarithmic visual acuity chart. For other vehicle classes, the naked or corrected visual acuity must reach 4.9 or above on the logarithmic visual acuity chart. 7. No red-green color blindness is permitted.
Was this review help?
11
5
Share
More Forum Discussions

How to turn on the heating air conditioning in Audi A4?

Audi A4's method for turning on the heating air conditioning is as follows: 1. Start the vehicle's engine and wait for the engine's water temperature to rise before turning on the air conditioning; 2. Locate the central control panel and turn on the air conditioning system; 3. Use the middle fan speed knob to increase the air conditioning fan speed by turning it clockwise; 4. Use the temperature knobs on both sides to raise the air conditioning temperature by turning them clockwise; 5. Press the interior recirculation button to improve the heating effect, and turn it off after the temperature rises. The Audi A4 is a B-class vehicle manufactured by FAW-Volkswagen, with body dimensions of 4763cm in length, 1826cm in width, and 1426cm in height. In terms of power, the Audi A4 is equipped with a 3.0 standard Audi patented technology, the quattro all-wheel-drive system, which provides double the traction for the vehicle.
2
1
Share

How to Solve Oil Leakage in CFMOTO 250SR?

Oil leakage caused by stripped drain plug threads can be resolved by using a larger tap to rethread, installing a thread insert, and reinstalling the drain plug. Oil seepage due to cracks in the crankcase can be repaired using riveting or aluminum repair compound.
9
0
Share

How to Ride a Motorcycle with a Clutch?

Shift into neutral, press the clutch with your left hand, hold the start switch, and release it after the vehicle starts. Press the clutch with your left hand, shift into first gear, and gently accelerate while slowly releasing the clutch to move the motorcycle forward.
14
1
Share

How to Register an Engine Replacement?

Apply for the modification procedures at the vehicle management office, and have the staff issue a vehicle inspection application while keeping a copy of the new engine number. Drive the vehicle to the inspection site for testing. At this stage, there is no need to fill out various forms; you can proceed directly to the inspection. Go to the service hall to complete the procedures for changing the vehicle's engine number.
19
5
Share

How to Replace the Sunroof Drain Pipe on Lavida?

A drain pipe is secured by 5 clips, 2 of which require reaching inside the trim panel to feel - these clips are somewhat loose and can be removed with a bit more force. Install the newly purchased pipe along the original routing. Both connection points (to the sunroof and exterior drain outlet) have transparent rubber tips - ensure they are properly inserted.
11
4
Share

How to Replace a Fuel Pump?

Open the circular cover to find the brown corrugated tube, which must not be damaged. Then unscrew the fuel pump cover, reach into the fuel tank to locate and unscrew the pump core. Finally, reach into the fuel tank again to unscrew the pump core seat. Avoid using excessive force. Note that there are two rubber rings and a thin circular ring on the pump core, which should be carefully preserved.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.