Is a probationary sign required during the internship period?

1 Answers
Bilbo
07/25/25 7:28am
During the internship period, a probationary sign is required, and failure to display it will result in a fine. If a probationary driver does not affix or hang the unified sign on the rear of the vehicle, if the sign cannot be properly recognized, or if the sign does not meet the requirements (such as self-printed signs), it will be considered as not displaying the sign. According to Article 64, Paragraph 3 of Order No. 123: During the internship period, a unified probationary sign must be affixed or hung on the rear of the vehicle when driving. New drivers can obtain the probationary sign at the traffic violation processing windows of the local traffic police brigade or the vehicle management offices (branches) by presenting their driver's license.
Was this review help?
14
1
Share
More Forum Discussions

How to use cruise control on Mercedes-Benz A200L?

Push the cruise control button downward in the direction indicated by "—SET" to set the current speed as the cruising speed. Press the button with the cruise control symbol to activate the cruise control, and the corresponding indicator will be displayed on the instrument panel information window. The cruise control will be immediately deactivated when the brake pedal is pressed, but pressing the accelerator pedal will not affect it.
1
0
Share

How to Stop a Continuously Sounding Honda Alarm?

When the door lock is disabled, the alarm will sound. If this happens to your car, use the key to open the driver or passenger door. To stop the alarm, remove the fuse of the alarm. It is generally located under the steering wheel, but make sure you remove the correct one to avoid mistakes.
19
3
Share

Where is the wiper switch on the Nissan Qashqai?

Nissan Qashqai's wiper switch is located on the right-hand stalk of the steering wheel. Here are some precautions for using the wipers: 1. Maintain cleanliness: When there are streak marks on the glass surface, the wiper blade may be dirty. You can sprinkle alcohol on a towel and wipe the surface of the wiper blade. Cleaning once a month can improve the performance of the wipers. 2. Check the rubber: If the wiper makes unusual noises while operating, the rubber blade may be aged or cracked. If the wear is not severe, you can sand the rough spots on the surface with sandpaper. 3. Avoid sunlight: Park the car in a shaded area where it is not exposed to sunlight, such as a garage. Summer is particularly harsh on cars. Wiper blades, being rubber products, will age faster under such conditions. 4. Refill fluid: Adding plain water directly to the windshield washer reservoir is not conducive to the maintenance of the windshield and wiper blades in the long run. To ensure the longevity of the components, always use proper windshield washer fluid. Refill the washer fluid in time to be prepared for unexpected needs.
1
0
Share

What are the causes and solutions for BMW air conditioning not cooling?

Check whether there are no bubbles visible in the sight glass when the car air conditioning is running, and no bubbles appear after the compressor stops. During normal operation of the air conditioning, if there are continuous and slow bubbles in the sight glass, it indicates insufficient refrigerant. Use your hand to twist the belt at the middle of the drive belt; it should rotate about 90°. If the rotation angle is excessive, it means the drive belt is loose and should be tightened.
20
0
Share

How to remove the fuel pump of Honda XRV?

Use a screwdriver to pry off the fuel pump cover plate. Gently pry the clip on the side of the wiring harness with a screwdriver, remove the wiring harness connector, and pull out the two fuel pipes. Use a special tool for the pump cover to remove the sealing cover ring or the so-called fuel pump cover ring. Gently lift the fuel pump assembly out of the fuel tank and place it in the prepared basin.
11
2
Share

Where is the navigation system in the Audi A3?

The navigation system in the Audi A3 is located within the MMI system. Here are the detailed specifications of the Audi A3: 1. Vehicle Positioning: The Audi A3 is a compact sedan under the Audi brand, available in both sedan and hatchback versions. The A3 also has high-performance variants, namely the S3 and RS3. 2. Powertrain: The 1.4-liter turbocharged engine in the Audi A3 delivers 150 horsepower and a maximum torque of 250 Nm. This engine reaches its peak power at 5,000 to 6,000 rpm and achieves maximum torque between 1,750 and 3,000 rpm. It features direct fuel injection technology and uses an aluminum cylinder head and block. This engine is paired with a 7-speed dual-clutch transmission. The 2.0-liter turbocharged engine produces 190 horsepower and a maximum torque of 320 Nm, with peak power at 5,000 rpm and maximum torque between 1,600 and 4,000 rpm. This engine employs fuel stratified injection technology and utilizes an aluminum cylinder head with a cast iron block. It is also mated to a 7-speed dual-clutch transmission.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.