Is a probationary sign required during the internship period?

1 Answers
TuckerLee
07/24/25 7:50am
During the internship period, it is mandatory to display a probationary sign. Failure to do so will result in a fine. If a probationary driver does not affix or hang a unified sign at the rear of the vehicle; if the affixed or hung sign cannot be normally recognized; or if the sign does not meet requirements, such as signs like "New Driver" or self-printed signs, it will be considered as not displaying the sign. Below is some information about the probationary sign: 1. Purpose: When driving, probationary drivers should place the probationary sign in a prominent position on the rear window or the rear of the vehicle. Other drivers, upon seeing this sign, can take preemptive measures to yield, thereby gaining understanding and consideration from other drivers, pedestrians, and traffic police, and preventing traffic accidents. 2. Usage method: One suction cup-type probationary sign and one magnetic-type probationary sign. The suction cup-type sign should be affixed to the inside of the rear window of the vehicle.
Was this review help?
16
1
Share
More Forum Discussions

How to close the sunshade of the Hongqi HS5 sunroof?

The sunroof opening and closing function is located below the SOS button. Features of the Hongqi HS5: The new Hongqi HS5 is full of charms and highlights, briefly summarized as mH5, where m stands for numerous, H represents charms and highlights, and the 5th power signifies five major characteristics: supreme luxury, supreme elegance, supreme comfort, supreme intelligence, and supreme safety at its core. Powertrain of the Hongqi HS5: The Hongqi HS5 is equipped with a low-power version of the CA4GC inline four-cylinder turbocharged direct injection engine, with a rated power of 165kW and a maximum torque of 340N·m. This engine is independently developed by the FAW Group, incorporating ten industry-leading technologies such as high-compression ratio Miller cycle combustion technology, 350bar precise fuel injection technology, full MAP intelligent thermal management technology, and all-aluminum lightweight engine technology, achieving a thermal efficiency of 39%. The CA4GC aluminum-steel engine is lightweight, approximately 50% lighter than cast iron cylinder blocks of the same displacement. Additionally, thanks to the platform mesh grinding process, the engine reduces wear on the cylinder liners and piston rings, extending the overall engine lifespan.
14
5
Share

Is a U-turn allowed where left turns are prohibited?

At intersections where left turns are prohibited, U-turns are also not allowed. If a U-turn is made in a no-U-turn zone, according to the "Road Traffic Safety Law," the violator will be fined 200 yuan and receive 3 penalty points. Generally, on long roads, solid lines, dashed lines, or no-U-turn signs are present in the middle sections or before intersections. If the line is a yellow dashed line or white dashed line without any prohibition signs, a U-turn is allowed. However, U-turns are prohibited if there are solid lines or prohibition signs. Scenarios where U-turns are permitted: Intersections with U-turn signs: If there is a clear U-turn sign at the intersection, a U-turn is allowed. If there is a U-turn traffic light, follow its instructions. In the absence of a traffic light, make the U-turn based on the situation without obstructing other vehicles or pedestrians. Intersections without explicit no-U-turn or no-left-turn signs: If there are no explicit signs prohibiting U-turns, they are allowed. "No explicit prohibition" means the absence of signs like "No U-turn," "No Left Turn," or solid central lines. In such cases, U-turns can be made confidently. Yellow grid zones: Yellow grid lines are no-stopping zones, typically marked at intersections prone to congestion due to temporary stops, important facility entrances, or other designated areas. Stopping (including waiting at traffic lights) on these grids is a violation. Although stopping is prohibited, U-turns are allowed in yellow grid zones unless a central barrier is present. These zones effectively permit U-turns. Intersections with U-turn traffic lights: This is straightforward—if there is a U-turn traffic light, proceed only when it is green. When "No Left Turn" and "U-turn Permitted" signs coexist: U-turns are allowed, but left turns are prohibited. Note that "No U-turn" and "No Left Turn" are not the same. Precautions when making U-turns at intersections: Observe road markings. If solid lines are present, U-turns are prohibited under any circumstances. Continue driving to find a suitable spot. If a "No Left Turn" sign is displayed, U-turns are also prohibited at that intersection, even if no explicit "No U-turn" sign exists, as U-turns inherently involve left-turning movements. U-turns must be made from the innermost left-turn lane. If in the second left-turn lane, U-turns are not permitted at that intersection. Yield to oncoming traffic when making a U-turn. Proceed only if it does not interfere with straight-moving vehicles; otherwise, you bear full liability for any accidents. Near stop lines at intersections, lanes often have guiding arrows. The leftmost lane may not always have a left-turn arrow—some may have straight arrows. Even without explicit no-U-turn signs, U-turns are prohibited in such lanes. U-turns must not be made on pedestrian crosswalks, as this is also a violation.
17
5
Share

What Causes Engine Vibration When the Air Conditioner is On in an Elantra?

Engine vibration when the air conditioner is on can be caused by the following reasons: 1. Engine control logic error, unable to receive the signal of air conditioner activation: When the system cannot determine whether the air conditioner is on, the Engine Control Unit (ECU) mistakenly perceives it as a temporary high load and attempts to compensate by increasing the engine speed to counteract the resistance during vibration. When the engine speed decreases, it cannot handle the load from the air conditioner compressor, causing the speed to increase again. This back-and-forth adjustment manifests as engine vibration. 2. Air conditioner control circuit error, unable to send the air conditioner activation signal: Since the system cannot determine the air conditioner's status, the ECU continuously adjusts the engine speed, resulting in engine vibration. 3. Air conditioner circuit malfunction, causing intermittent operation of the air conditioner: When the air conditioner is off, the compressor belt runs idle without load, so it does not affect the engine load. However, intermittent operation of the air conditioner compressor causes the engine to continuously adjust its speed, leading to engine vibration.
5
3
Share

What is the fuel tank capacity of the seventh-generation Accord?

The fuel tank capacity of the seventh-generation Accord is 65 liters, as officially announced. Owners of the seventh-generation Accord can also check this information on the vehicle's configuration sheet. The recommended fuel grade for the seventh-generation Accord is 92 octane, with a fuel consumption ranging from 9.2 to 12.4 liters per 100 kilometers. A full tank can provide a driving range of 524 to 707 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill level, leaving some space between the safe fill level and the tank opening. This extra space accommodates fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount added may exceed the marked capacity.
20
2
Share

What does it mean when the APS light in a car is on?

This indicates a problem with the car's automatic parking system, such as sensor failure, central control system malfunction, etc. The APS system generally includes an environmental data collection system, a central processor, and a vehicle strategy control system. Here is some relevant information: 1. The Automatic Parking System (APS), also known as automated parking, refers to a system where the car can automatically identify available parking spaces and correctly complete the parking maneuver without human intervention, using onboard sensors (parking radar) and a vehicle processor. 2. To achieve correct automatic parking, the vehicle must automatically accomplish two important tasks. First, it must accurately identify available parking spaces, including the speed and accuracy of space recognition. Second, and most importantly, it must smoothly guide the vehicle into the parking space. The automatic parking process can be divided into three parts: space detection, path planning, and path tracking. 3. The automatic parking system perceives environmental information through a sensor system, including video sensors (cameras), millimeter-wave radar, ultrasonic radar, etc. Based on the information from the sensor system, it determines effective parking space information and the vehicle's relative position, thus deciding the initial parking position. The electronic control unit performs real-time environmental modeling based on sensor information, generates the vehicle's motion path, and controls the vehicle to move automatically into the parking space without collision.
17
0
Share

Is it normal for water to seep from the chassis of a Nissan Sylphy?

Water seepage from the chassis of a Nissan Sylphy is normal drainage and should not be a problem. Below is an introduction to the Sylphy: 1. Overview: The Sylphy is a sedan series launched by Dongfeng Nissan Passenger Vehicle Company in 1959. In terms of health, the "in-car air quality" and "in-car noise" scores lead other models in the same batch. In terms of energy conservation and environmental protection, the "comprehensive fuel consumption" and "exhaust emissions" far surpass those of other models in the same batch. 2. Interior: Continuing the core comfort advantages of the Sylphy series, the 14th generation Sylphy offers a spacious five-seat layout and high-quality, lightly luxurious interiors, providing a delightful riding experience for the whole family. High-performance acoustic noise reduction technology and the NissanConnect intelligent system offer a relaxed and enjoyable driving scenario. 3. Performance: In addition to a significantly enhanced body structure, the 14th generation Sylphy is equipped with Nissan's unique IDM Intelligent Driving System. Starting with the 14th generation Sylphy, the Chinese family car market will enter an era of premiumization.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.