Is a Power of Attorney Required for Vehicle Inspection in Another Location?

2 Answers
DeSabrina
07/25/25 12:16pm
It needs to be processed annually because the power of attorney has an expiration date. Here is relevant information about vehicle inspections: 1. Timeframe: For passenger cars and blue-license-plate minivans, the first six years after new vehicle registration require inspection every two years; after six years, it becomes annual; after ten years, inspections are conducted once a year; after fifteen years, twice a year. For trucks, inspections are required annually after registration, and after ten years, twice a year. 2. Regulations: If a vehicle is found by traffic police on the road without a valid inspection, the owner may face fines or vehicle impoundment. Additionally, in insurance contracts, vehicles that have not undergone timely inspections are considered unqualified, and no claims will be paid in the event of an accident.
Was this review help?
7
4
Share
HannahLee
08/11/25 8:15pm
When I was working in another city, my car's annual inspection was due, and I needed to apply for a power of attorney to have a friend handle it on my behalf. The process wasn't too complicated: first, go to the local vehicle management office to fill out the power of attorney form, get it stamped, and then give it to a trusted friend to take to the annual inspection site in the other city. This saved a lot of hassle—otherwise, I would have had to rush back myself. The main purpose of the power of attorney is to prove authorization and avoid compliance risks. Before the inspection, don’t forget to check things like lights and brakes to ensure the car passes safely. Policies have become more relaxed in some areas, but the power of attorney is still the safest choice to avoid potential fines later. Overall, a power of attorney for an out-of-town annual inspection is essential, especially for those who travel frequently for work. Spending a little extra time to get it done properly can give you peace of mind when driving.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

BMW X5 Engine Oil at 98°C, What is the Coolant Temperature?

BMW X5 engine oil at 98°C, the coolant temperature should be 90°C. Hazards of Abnormal Engine Coolant Temperature: When the engine coolant temperature is too low, the combustion of gases inside the engine becomes incomplete, and it also affects the lubrication effect of the antifreeze. Of course, the vehicle's tailpipe emissions will exceed standards. When the temperature is too high, it can easily cause boiling, leading to excessive engine temperature, which can damage the engine. Standard Settings for Engine Coolant Temperature: The normal coolant temperature for BMW engines ranges between 80°C and 120°C. The engine control unit can adjust the engine temperature according to driving conditions. It can achieve four different temperature adjustment ranges: 112°C for economy mode, 105°C for normal mode, 95°C for sport mode, and 80°C for maximum power mode.
20
3
Share

What type of suspension does the Skoda Superb use?

Skoda Superb uses a MacPherson strut independent suspension at the front and a four-link independent suspension at the rear. Advantages of Skoda Superb's suspension system: The Superb is based on Volkswagen's PQ46 platform, featuring a MacPherson strut independent front suspension and a four-link independent rear suspension. The robust lower control arm not only withstands significant forces but also effectively protects other suspension components from damage in case of chassis impact. Additionally, the suspension is relatively soft, providing enhanced comfort. Advantages of the Skoda Superb model: The Skoda Superb, a B-class sedan launched by SAIC Skoda, boasts spacious interiors, powerful performance, high cost-effectiveness, generous material usage, decent handling, fuel efficiency, high safety standards, and an elegant exterior design.
11
1
Share

What are the reasons why the trunk of a BMW 320 won't pop up?

The reasons why the trunk of a BMW 320 won't pop up are insufficient spring tension, which prevents it from opening; or lock mechanism displacement or lack of lubrication causing the unlocking process to be stuck. Solutions for insufficient spring tension: First, open the trunk. At the corners of the trunk, peel back the rubber strip by hand and remove the interior trim panel to reveal the opening tension spring. For new cars, the normal setting is in the first position. If the trunk lid's opening and closing force is insufficient, it can be adjusted to the second or third position as needed. If the hydraulic struts of the trunk have lost their tension, it is best to take the car to a repair shop or a 4S store for servicing. Introduction to the trunk: The trunk is a space in a car used for storing luggage and items, functioning like a small storage room, typically located at the rear of the vehicle. The design of the trunk is highly practical, significantly reducing the burden of travel and improving convenience. With a trunk, there's no need to worry about how to carry luggage during trips, enhancing the enjoyment of travel. Maintenance of the trunk is also essential. If dirt is found on the trunk, it should be cleaned promptly to maintain cleanliness and tidiness to the greatest extent. Additionally, placing a mat in the trunk can facilitate cleaning and protect it from being scratched by sharp objects, killing two birds with one stone.
12
2
Share

How many lights are on when the Corolla is reversing?

When the Corolla is reversing, both the left and right lights should be on. Introduction to car reverse lights: Car reverse lights are installed at the rear of the vehicle and are used to illuminate the road behind when reversing, as well as to alert vehicles and pedestrians behind. Material description of car reverse lights: Gas car reverse lights, which use halogen materials. Halogen reverse lights are mature in technology and low in price, and are used in many vehicle models. However, they also have some drawbacks, such as radiation, mercury content, and being prone to breakage, which brings certain inconveniences to transportation and installation. The service life is about 8,000 hours. LED car reverse lights, which use LED materials. LED reverse lights are pollution-free, radiation-free, and have a long service life, with a theoretical lifespan of over 50,000 hours. Many vehicle models have already modified their reverse lights to LED reverse lights. However, due to their higher price, LED reverse lights have a significant impact on widespread use. Especially in China, the penetration rate is quite low, while in developed countries, the penetration rate is quite high.
6
0
Share

Is New Baojun a Joint Venture Car?

New Baojun is not considered a joint venture car; it belongs to domestic vehicles. Introduction to Joint Venture Cars: As the name suggests, joint venture cars are projects jointly established by Chinese and foreign investors. The Chinese side contributes by providing land and factory usage rights, as well as capital, while the foreign investors contribute brands, technology, capital, and talent. Joint venture cars are the products of such collaborations. The foreign party provides technology, talent, and brands for assembly within the country, but the core technology remains under foreign control. Advantages of Joint Venture Cars: Strong brand reputation and competitiveness. Joint venture cars have a long history of development, strong brand recognition, and high competitiveness. Better quality. Domestic cars started late and developed slowly, only recently catching up, but they still lag far behind joint venture cars in terms of engine technology. Joint venture cars have better quality, with mature R&D technology and more experience accumulated over years of development. Higher resale value. Joint venture cars have a broader market due to their better quality and stronger brand recognition, making even used cars more popular in the market. Many consumers prefer buying used joint venture cars over used domestic cars, resulting in higher resale value for joint venture cars.
9
3
Share

Can ETC be installed without attaching it to the windshield?

ETC can be used without being stuck to the glass. Installing ETC on the upper part of the windshield is to minimize obstruction of the driver's view while ensuring better recognition by highway toll station equipment. If you don't want to install it on the glass, try to place it in an open position where it can be seen through the windshield. The installation position for small cars is generally in the upper-middle part of the front windshield, while for large vehicles like trucks and buses, it is in the lower-middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with anti-explosion film or those that have been retrofitted with it, which may affect microwave communication signal transmission, ETC should be installed in the microwave skylight zone. Here are some precautions for installing ETC: Do not block the view; it's best to install it behind the rearview mirror: Many car models have windshields with a large rearward tilt angle, which reduces the driver's field of vision. If ETC is installed without considering this, it may increase the driver's blind spots. Installing it behind the right side of the rearview mirror can help avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back for self-charging. Therefore, during installation, avoid the blackened areas on the windshield and positions that may block the solar panel. Once installed, do not remove it casually: The adhesive in the middle has an anti-tamper rod connected to a switch. After installation, the windshield will press the anti-tamper rod in. If removed casually, the rod will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle ahead to avoid automatic payment for the wrong vehicle. The recognition speed for ETC lanes is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle's device information, leading to payment failure. When using a debit card linked to ETC, insufficient balance may also cause payment failure.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.