Is a physical examination required for license renewal?

1 Answers
CourtneyDella
07/30/25 8:20am
License renewal requires a physical examination. The physical examination items required for driver's license renewal upon expiration include height, weight, motor function examination, physiological defect examination and determination, unequal length of lower limbs examination, medical history inquiry, vision examination, color discrimination, and hearing examination. Driver's license renewal period: Motor vehicle drivers should apply for license renewal at the vehicle management office of the driver's license issuing authority within 90 days before the expiration of the motor vehicle driver's license. Penalty regulations for expired driver's license: Driving a motor vehicle is not allowed during the expiration period, otherwise it can be treated as driving without a license.
Was this review help?
5
2
Share
More Forum Discussions

What is the reason for water leakage in the Kia K3 trunk?

The reason for water leakage in the Kia K3 trunk is damage to the trunk seal. Below is an introduction to the Kia K3: 1. In terms of appearance: The all-new K3 continues the family's tiger-nose design style, with the car's grille width increased, the front headlight lines elongated, and the fog light area decorated with irregular silver ornaments. The car adopts a transverse front package. 2. In terms of power: The all-new K3 will be equipped with a 1.5L naturally aspirated engine and a 1.4T turbocharged engine. The 1.5L engine has a maximum power of 115 horsepower and a peak torque of 144 Nm, matched with a new CVT continuously variable transmission. The 1.4T engine has a maximum power of 130 horsepower and a peak torque of 211 Nm, matched with a 7-speed dual-clutch transmission.
9
0
Share

Where is the mechanical door lock hole of the Roewe RX5 located?

The mechanical door lock hole of the Roewe RX5 is located at the outermost side of the driver's door handle. Some are covered with a panel, and you can see the mechanical hole inside by prying off the panel. The following is a related introduction to the Roewe RX5: 1. Introduction: The Roewe RX5 is an internet SUV, featuring Porsche chassis tuning, GKN intelligent real-time four-wheel drive derived from Land Rover, a fully independent suspension system, a four-way full-speed CANBUS system bus, etc., comprehensively improving the driving and riding quality. 2. Power: The Roewe RX5 is equipped with a 1.5T turbocharged engine, paired with a 6-speed manual transmission or a 7-speed dual-clutch transmission, with a maximum power of 124kW (169PS) and a peak torque of 250N·m, consistent with the power parameters of the current model.
2
5
Share

How Many Seats Does a Sedan Have?

Generally, a small sedan has five seats, while some luxury sedans have four seats. Here is some relevant information about sedans: 1. Definition: A sedan (saloon-car) refers to a vehicle designed to transport passengers and their personal belongings, with seats arranged between two axles. 2. Classification: A standard sedan has at least two rows of seats, with four or more seats. A premium sedan has at least two rows of seats, with four or more seats, and may include a foldable seat in front of the rear row. A station wagon has at least two rows of seats, with four or more seats, and one or more rows of seats that can be removed or have forward-folding backrests to provide a cargo platform. A convertible has at least one row of seats, with two or more seats.
6
1
Share

What are the differences between the 2021 Accord and the 2018 Accord?

The differences between the 2021 Accord and the 2018 Accord are as follows: the maximum horsepower is different, with the 2021 Accord having 194ps and the 2018 Accord having 177ps; the displacement is different, with the 2021 Accord at 1993ml and the 2018 Accord at 1498ml; the maximum power is different, with the 2021 Accord at 103kw and the 2018 Accord at 143kw. Maximum Horsepower: Maximum horsepower (Ps) refers to the maximum power output a car can achieve, measured in Ps, which is the same as the maximum power data. Displacement: Displacement (Swept-volume) is a specialized term in hydraulic transmission, referring to the volume of fluid inhaled or discharged per stroke or cycle. Generally, a larger displacement means the engine releases more energy per unit time (converting chemical energy from fuel into mechanical energy), resulting in better "dynamic performance." Therefore, off-road vehicles and sports cars usually have relatively larger displacements.
1
2
Share

What is the High Beam Symbol?

The high beam symbol consists of five parallel lines arranged from top to bottom and a semicircle facing to the right. When the high beam is activated, it appears as a blue indicator on the dashboard. Below are detailed explanations about the high beam: Scenarios for using high beams: When driving at night and there are no lighting tools around the road, making the surroundings very dark, and the road ahead is deep and long, the high beams should be used. Methods for turning the high beams on and off: First, turn on the low beams; after the low beams are on, push the control lever downward. At this point, the dashboard will display the indicator, and the high beams will be activated. To turn off the high beams, simply pull the control lever back, and the lights will switch back to low beams.
1
4
Share

What does ILM mean?

ILM stands for Information Lifecycle Management. Information Lifecycle Management refers to the practice of applying effective management throughout the lifecycle of information. ILM encompasses every stage from creation to disposal, including strategies, processes, practices, and tools that ensure the business value of information aligns with the most suitable and cost-effective IT infrastructure from its inception to final processing. Below is relevant information about its application in the automotive field: In Oracle Database 12c, Automatic Data Optimization (ADO) can be used to create policies and automate operations based on these policies to implement ILM strategies. ADO utilizes heat map-collected usage statistics, and depending on ILM requirements, partitioning, advanced row compression, and hybrid column compression may also be necessary.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.