Is a New Car Still Safe After Being Repaired from a Major Accident?

1 Answers
OLouis
07/29/25 4:57pm
New cars are no longer safe after being repaired from a major accident. Impact 1: After a traffic accident, the vehicle suffers strong impact forces, resulting in varying degrees of damage. In severe cases, the entire body of the car may be completely deformed. Although there are many auto repair shops, the technical skills of the repair personnel are often low, and the equipment used during repairs is outdated, leading to subpar repair results. Consequently, the repaired vehicle lacks safety and reliability. Impact 2: Even if an accident-damaged car can be restored to its original appearance after repairs, its fatigue life cannot be fully recovered. Moreover, most accident repairs do not follow the original manufacturer's specified repair methods, further reducing the vehicle's structural strength. Impact 3: Depreciation of accident-damaged cars. If the original value of the vehicle is high, details like replacing a bumper can significantly affect its resale value. Conversely, if the initial value is low, certain defects may not be as noticeable. Precautions after repairing an accident-damaged car: Engine speed should preferably not exceed 4000 rpm, as newly replaced parts require a break-in period and are unsuitable for high-intensity operation. Speed should also be kept moderate. Avoid overloading, as the repaired vehicle is still in a testing phase—some data may have been adjusted, but it requires a certain mileage for verification. Excessive weight places a heavy burden on the steering and braking systems. After driving a certain distance, the car should be taken to a repair shop for testing related data, such as checking for deformations in the chassis. If necessary, perform corrective measures.
Was this review help?
2
1
Share
More Forum Discussions

How often should the coolant be replaced in a Golf 7?

The coolant in a Golf 7 generally needs to be replaced every 2 years or 40,000 kilometers. This is just a reference interval. For commercial vehicles with higher mileage, the replacement cycle should be shorter. Since driving conditions vary for each vehicle, the replacement should be based on actual usage. Check the coolant level regularly and top it up if it is low. If you notice any suspended particles, sediment, or discoloration in the coolant, replace it immediately and clean the system. Coolant replacement method: Before completely replacing the coolant, conduct a thorough inspection to check for any leaks or cracks in the pipes, with a focus on the five-way hose. The five-way hose is named for its five connection points that distribute coolant to different parts of the vehicle. If there are any signs of coolant leakage in this area, replace the hose or reseal the connections as needed. Drain the old coolant and flush the system with clean water. Add water to the coolant reservoir and continuously flush the engine cooling system. Let the engine idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the system may appear slightly pink. Continue flushing until clean water flows out. Remember to remove the heater hose and drain the water from the heater core. After draining for about an hour, add new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, fill the coolant reservoir with another batch of coolant until it is nearly full. Start the engine and let it run for about 10 minutes. As the cooling system expels air, the coolant level will drop. Top it up again to the "MAXT" mark on the reservoir.
13
0
Share

What is the cause of the Volkswagen Multivan transmission failure?

Volkswagen Multivan transmission failure is caused by transmission oil leakage. Transmission oil leakage: When there is oil leakage in the car's transmission, it is necessary to check whether there is oil leakage at the front and rear oil seals of the car's crankshaft, and whether the contact surface of the front crankshaft is worn. The oil seals should be replaced in time. Solution: The leakage point is at the top of the transmission, which is above the hydraulic oil level. This area does not require complete sealing. Additionally, the automatic transmission does not maintain constant pressure during operation, which may lead to oil vapor release. The specific solution is to apply sealant to the leakage point, which involves cleaning the surface oil sludge and then applying sealant for sealing.
1
1
Share

What is the difference between multi-point injection and direct injection engines?

Multi-point injection and direct injection engines have the following differences. Multi-point injection engine: Multi-point injection, as the name suggests, means that each injector has multiple spray holes. It directly injects fuel into the intake manifold of each cylinder, which then enters the corresponding combustion chamber. Each cylinder has one injector. Multi-point injection engines are the result of matured electronic fuel injection technology and are currently mainstream products. Direct injection engine: Direct injection, also known as FSI, directly injects fuel into the cylinder, where it mixes with air to form a combustible mixture. This maximizes the efficiency of every drop of fuel but places higher demands on the injector due to the high-temperature and high-pressure environment inside the cylinder.
17
0
Share

Do You Need to Press the Clutch in a Semi-Automatic Car?

Semi-automatic cars are equipped with a clutch, allowing drivers to freely adjust gears and engine speed based on their preferences. How to Drive a Semi-Automatic Car: The manual mode enables drivers to freely adjust gears and engine speed according to their preferences. Unlike purely manual transmission cars, semi-automatic manual transmissions have a clutch mechanism but do not require manual operation by the driver—this is known as an automatic clutch. When using the manual mode in a semi-automatic car, simply shift to manual mode and adjust the gear up or down as the speed changes. If the speed does not match the corresponding gear, the gear will automatically shift down; if the speed exceeds the current gear, the driver needs to manually shift up. Advantages of Semi-Automatic Transmission: A semi-automatic transmission is a gear-shifting device that combines the functions of manual and automatic transmissions. This transmission system integrates the advantages of both automatic and manual transmissions, minimizing power loss in the shifting system.
10
1
Share

What brand is the original audio system in the Mercedes-Benz E-Class?

The audio system used in the Mercedes-Benz E-Class is Burmester. Burmester's collaboration partners: Burmester primarily collaborates with Mercedes-Benz's high-end models for car audio systems. The entry-level Burmester system consists of 13 speakers and is currently standard in some models of the Mercedes-Benz E-Class, S-Class high-end versions, G500, and Maybach S-Class. Installation method: The entry-level Burmester audio system in Mercedes-Benz has 13 speakers. During installation, the door panels need to be removed, the original speakers replaced, an amplifier added, and then the system is programmed and debugged. This will enable the Burmester-specific settings interface to appear on the central control display.
20
5
Share

Will the Shark Fin Antenna of Jetour X70 Plus Affect the Car if Damaged?

Jetour X70 Plus shark fin antenna being damaged will have an impact. Shark Fin Antenna: The shark fin on the roof is actually the car's antenna. By transplanting the spoiler from an airplane to a car, the shark fin antenna has obvious advantages. It not only overcomes many shortcomings of traditional antennas but also, due to its elegant appearance, comprehensive functionality, and seamless integration with the car's overall design, makes the car look more sporty and fashionable. Functions of the Shark Fin Antenna: Different from the traditional impression of antennas, the shark fin antenna can not only receive radio signals but also has other functions, such as discharging static electricity. The shark fin car antenna makes full use of electronic characteristics to guide static electricity to the tip of the shark fin antenna for discharge. No matter where the shark fin antenna is installed on the car, it can reduce the effects of static electricity. Especially during the dry winter season, its effect is particularly noticeable.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.