Is a left turn allowed at an intersection where U-turns are prohibited?

1 Answers
Deanna
07/30/25 8:29am
At an intersection where U-turns are prohibited, left turns are also not allowed. Below are relevant details about prohibited U-turns: 1. Definition: Intersections that prohibit left turns also prohibit U-turns. If an intersection prohibits left turns, it inherently means U-turns are prohibited as well; 2. Locations where U-turns are prohibited: Motor vehicles are not allowed to make U-turns at locations with signs or markings prohibiting U-turns or left turns, as well as at railway crossings, pedestrian crosswalks, bridges, sharp curves, steep slopes, tunnels, or any sections of road prone to danger. Motor vehicles may make U-turns at locations without signs or markings prohibiting U-turns or left turns, provided they do not obstruct the normal passage of other vehicles and pedestrians.
Was this review help?
3
1
Share
More Forum Discussions

Is an Appointment Required for the Changchun Subject 4 Exam?

An appointment is required for the Changchun Subject 4 exam. Below is an introduction to Subject 4: Exam content: Requirements for safe and civilized driving, safe driving skills under complex conditions, and emergency handling in critical situations. Exam format: Depending on the type of driver's license being tested, 50 questions are randomly selected from the corresponding Subject 4 question bank in proportion. For small vehicle licenses, questions are drawn from a pool of 1,240, while for large vehicle licenses, they are drawn from a pool of 1,235. Each question is worth 2 points. The exam duration is 45 minutes, and if 12 points (6 questions) are incorrect during the exam, the session is terminated. The question types include true/false questions (1-20), single-choice questions (20-40), and multiple-choice questions (41-50). Exam questions include image-based questions, scenario recognition questions, and text-based questions.
9
5
Share

Should the speed be increased to over 60 after entering the ramp?

Vehicles must accelerate to over 60 on the ramp, and then turn on the left turn signal to enter the traffic lane under the premise of ensuring safety; if there are vehicles closely following on the traffic lane, you cannot directly enter the traffic lane. Relevant introductions are as follows: Increase speed: On the ramp (when entering), quickly increase the vehicle speed, but do not exceed the speed limit indicated by the signs. On the ramp, overtaking, U-turns, parking, and reversing are not allowed. Choose the right moment: After driving the vehicle from the ramp into the highway acceleration lane, turn on the left turn signal, increase the speed to over 60 kilometers per hour as soon as possible, and carefully observe the traffic conditions on the lane to choose the right moment to enter the traffic lane.
4
3
Share

What brand of engine does Maserati use?

Maserati's entire lineup is equipped with a 4.7-liter V8 naturally aspirated engine. Here is the relevant introduction of the 2021 Maserati Ghibli: 1. The Maserati GT is a grand tourer under the Maserati brand, with body dimensions of 4974mm in length, 1945mm in width, and 1484mm in height, a wheelbase of 2998mm, a fuel tank capacity of 80 liters, and a curb weight of 2020kg. 2. The 2021 Maserati Ghibli features a double-wishbone independent front suspension and a multi-link independent rear suspension. 3. The Maserati GT is powered by a 2.0T turbocharged engine, delivering a maximum horsepower of 330PS, a maximum power of 243kW, and a maximum torque of 450Nm, paired with an 8-speed automatic transmission.
14
5
Share

What Causes the Oil Light to Illuminate When There is Sufficient Engine Oil?

The reasons for the oil light illuminating when there is sufficient engine oil are: 1. Clogged oil passages; 2. Low oil viscosity; 3. Issues with the oil pump; 4. Problems with the oil sensor; 5. Electromagnetic interference. The functions of engine oil include: 1. Lubrication and friction reduction; 2. Assisting in cooling and temperature reduction; 3. Sealing and preventing leaks; 4. Rust and corrosion prevention; 5. Shock absorption and cushioning. The steps for changing engine oil are: 1. Lift the vehicle, remove the undercarriage shield, and place a container of about 10 liters beneath the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow for two minutes at the oil filler port, then tighten the drain plug after draining and wipe it with a tissue to check for leaks; 3. Reinstall the undercarriage shield, lower the vehicle, and use a funnel to add oil through the filler port.
18
2
Share

What are the steps for upgrading the infotainment system of the 2017 Haval H6?

The steps for upgrading the infotainment system of the 2017 Haval H6 are: 1. Turn the ignition key to the power-on position; 2. Select 'Full Upgrade' on the screen; 3. Do not operate any buttons on the navigation screen during the upgrade process; 4. After the progress bar completes, a prompt will indicate a successful upgrade; 5. Start the vehicle and reopen the navigation system. The 2017 Haval H6 has a body size of 4615mm in length, 1860mm in width, and 1720mm in height, with a wheelbase of 2680mm and a body weight of 1675kg. The front suspension is a MacPherson independent suspension, and the rear suspension is a double-wishbone independent suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 210Nm, and a maximum power of 110kW, paired with a 6-speed manual transmission.
3
5
Share

What are the symptoms of engine blow-by?

The symptoms of engine blow-by are: 1. Decreased engine power; 2. Deterioration of engine oil; 3. Engine failure to start, with blow-by at the valve cover and white smoke emitting from the crankcase oil filler port. The causes of engine blow-by include: 1. Piston rings being misaligned, broken, or worn out, leading to ineffective operation and poor cylinder sealing; 2. Excessive clearance in piston ring gaps, side gaps, or back gaps; 3. Improper installation of the air filter or a damaged filter element, causing large amounts of dust and impurities to be drawn into the cylinder and resulting in wear; 4. Cylinder head bolts not tightened to standard torque, leading to poor sealing of the cylinder gasket and gas escaping from the engine; 5. Poor sealing between the valves and valve seats; 6. Severe lack of coolant in the cooling system, causing a rapid rise in temperature, adhesion between the piston and piston rings or cylinder liner, and extensive scoring on the piston surface.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.