Is a deformed spare tire well considered a serious accident?

1 Answers
StLeilani
07/29/25 6:28pm
A deformed spare tire well that hasn't damaged the frame is considered a normal minor accident, but if it has damaged the frame, it's a major accident. Below is relevant information about accident vehicles: 1. Definition: A car with repaired or replaced anti-collision beams is not considered an accident vehicle. Only if damage to these parts causes severe impairment to the car's performance can it be classified as an accident vehicle; otherwise, it isn't. 2. Judging an accident vehicle: From the front, the car's front anti-collision beam is at the front. During a collision, the front bumper will deform, compressing the anti-collision beam, which then presses against the radiator. Subsequent energy will compress the engine. Generally, opening the engine compartment allows you to see the car's fan and radiator. If there are signs of replacement, it indicates a problem. Then, check the frame on both sides of the radiator. The frame extends a section to fix the anti-collision beam. A frontal collision can cause deformation, and even if it's repaired with panel beating, it can't be restored to a perfectly flat state—just like how a folded piece of paper can't be perfectly flat again. In a collision, the front anti-collision beam bears significant force. From the rear, inspect the trunk. Opening the trunk reveals the spare tire well, which can't be replaced—only reshaped—making it easier to spot if there's been an accident. Additionally, some cars lack a rear anti-collision beam, making the rear of the vehicle more vulnerable.
Was this review help?
13
0
Share
More Forum Discussions

What brand of tire is farrdad?

farrdad is a Yuanlu tire. Here is the relevant introduction: 1. Functions of tires: mainly include dry grip, hydroplaning resistance, providing comfort, reducing driving noise, impact resistance, wet grip, load capacity, handling performance, average wear, and mileage. 2. Cross-sectional structure of tires: It can be roughly divided into 4 parts: tread, shoulder, sidewall, and bead. Each part has its own function. The tread mainly contacts the ground, the shoulder and sidewall provide support, and the bead contacts the rim to provide sealing. 3. Internal composition of tires: The interior of the tire is composed of multiple layers of different materials, including tread pattern, overlay, steel belt layer, stress-absorbing rubber strip, carcass ply layer, and inner liner.
1
5
Share

What are the functions of the Mercedes-Benz E-Class NFC?

Allows two electronic devices (one of which is typically a mobile device, such as a smartphone) to communicate within a few centimeters of each other. Here is a related introduction about the Mercedes-Benz E-Class sedan: 1. Introduction: The Mercedes-Benz E-Class sedan is a mid-to-large-sized high-end business sedan, coupe, and station wagon developed by Mercedes-Benz, positioned between the C-Class and S-Class. 2. Features: A relaxed and comfortable atmosphere is standard in the E-Class sedan, thanks to the automatic climate control system, which allows passengers to choose their preferred temperature. 3. Seat Configuration: Standard seat upholstery is fabric (Classic and Elegance model series) or a combination of fabric and ARTICO artificial leather (Avantgarde model series). Luxury genuine leather upholstery is optional, with Nappa leather being even more luxurious, durable, and breathable.
5
1
Share

What position on the road should the steering wheel align with when driving?

In real-world road driving, the safest method is to keep the vehicle centered in the lane. Here are the ways to align the car with the center of the road: 1. Check the rearview mirrors: Adjust the seat first, then adjust the rearview mirrors. For the left rearview mirror, use the horizon as a reference—adjust the vertical angle so that the sky and ground each occupy half of the mirror. Next, adjust the horizontal angle so that the car body occupies about 1/4 of the mirror's surface. After adjusting the mirrors this way, observe the lane lines through the mirrors. The left lane line should appear at the bottom center of the left mirror, while the right lane line should appear at the bottom right corner of the right mirror. At this point, the vehicle is positioned exactly in the center of the road. 2. Observe the position between the A-pillar and the dashboard: When the angle between the A-pillar and the dashboard aligns with the left lane line, the vehicle is centered on the road.
17
4
Share

What is the curb weight of the Changan Oushang X7?

The curb weight of the Changan Oushang X7 ranges from 1900 to 2075 kilograms. The Changan Oushang X7 is a compact 5-door, 5-seat SUV produced by Changan Automobile. The dimensions of this vehicle are 4705mm in length, 1860mm in width, and 1720mm in height, with a wheelbase of 2780mm and a fuel tank capacity of 55 liters. In terms of interior design, the car features a relatively traditional style with a well-structured T-shaped layout. The display on the center console integrates functions such as tire pressure monitoring, Baidu CarLife, and navigation. Regarding configurations, the vehicle is equipped with a 5G intelligent vehicle chip (imx8), a "Thousand-mile Eye" remote video system, ultra-high-definition 360-degree panoramic imaging, an ultra-high-definition surround-view driving recorder, and a fully automatic parking system, among others.
8
5
Share

Why Turn on the Left Turn Signal When Entering a Highway?

Before entering a highway, you should turn on the left turn signal (because highways are entered from the right side). The highway lanes are on the left, and turning on the left turn signal allows vehicles behind you in the driving lane to clearly understand your intention to avoid accidents. Here is additional information: 1. Entering the main highway from an on-ramp: Increase your vehicle speed to about 60 kilometers per hour in the ramp and keep the left turn signal on. Turn off the signal after entering the main highway. 2. Transitioning from one highway to another: If another highway merges with vehicles from the right side of the highway you are driving on, try to stay in the left lane. 3. Entering a highway from an on-ramp: When entering a highway from an on-ramp, quickly accelerate in the acceleration lane and turn on the left turn signal to alert vehicles behind you. Merge slowly into the driving lane once the speed reaches the required limit.
6
2
Share

What is the appropriate tire pressure for summer tires?

The appropriate tire pressure for summer tires is between 2.3 and 2.5 bar. Seasonally speaking, the standard and recommended data given by the industry are 2.3 bar for the front tires and 2.5 bar for the rear tires in summer; in winter, it is 2.5 bar for the front tires and 2.7 bar for the rear tires. Depending on the vehicle model and style, the tire pressure data may vary slightly, but the difference will not be significant. If the tire pressure is insufficient, tire deformation will increase, the tread on both sides of the tire will wear excessively, and the tire body will twist and deform due to its inability to withstand ground pressure, generating high temperatures that accelerate tire wear and lead to blowouts. Excessive tire pressure will make the tire too hard, losing elasticity and shock absorption capacity, resulting in poor grip. Excessive wear on the central tread will cause uneven tread depth, and the tire may also blow out due to its inability to withstand excessive pressure during high-speed operation.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.