Is a car tire pressure of 2.0 bar normal?

1 Answers
StMila
07/25/25 8:51am
A car tire pressure of 2.0 bar is not normal. According to the provisions and requirements of the international GBT2978-2008 standard, the standard tire pressure for standard tires is 2.4-2.5 bar. 2.0 bar is below the minimum value of the standard tire pressure, so it is not normal. Hazards of low tire pressure: The friction coefficient with the road surface increases, leading to higher fuel consumption; Causes the steering wheel to become heavy and prone to deviation, among other factors that are detrimental to driving safety; Increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling; Reduces the function of the cord and rubber, leading to delamination or cord breakage and excessive friction with the rim, causing damage to the bead area and abnormal wear; The friction between the tire and the ground increases exponentially, causing the tire temperature to rise sharply, the tire to soften, and its strength to drop drastically. High-speed driving may lead to a tire blowout; Increases tire body deformation, making the tire side prone to cracking, while generating flexing motion, leading to excessive heat, promoting rubber aging, fatigue of the cord layer, cord breakage, and also increasing the tire's contact area with the ground, accelerating shoulder wear.
Was this review help?
13
2
Share
More Forum Discussions

How to Turn Off the Rear Wiper of a Car?

The rear wiper of a car is in the off state by default. Press the wiper lever down to the first gear to activate the rear window wiper. The middle OFF position turns off the rear wiper, while lifting the wiper lever activates the windshield washer for the front wiper. Pressing the wiper lever down to the second gear activates the rear wiper's washer function, which sprays windshield washer fluid and cleans. The technical name for a car wiper is a windscreen wiper. It is a blade structure installed in front of the windshield, composed of a motor, reducer, four-bar linkage, wiper arm spindle, wiper blade assembly, etc. Its main function is to remove rain, snow, and dust from the windshield that obstructs the view.
5
1
Share

Where is the oxygen sensor located in a car?

The oxygen sensor is installed on the exhaust pipe of the car's engine. The automotive oxygen sensor is a critical feedback sensor in the fuel injection engine control system, serving as a key component for controlling vehicle exhaust emissions, reducing environmental pollution caused by vehicles, and improving the fuel combustion quality of the car's engine. The oxygen sensor uses a ceramic sensitive element to measure the oxygen potential in various heating furnaces or exhaust pipes, calculates the corresponding oxygen concentration based on the chemical equilibrium principle, and achieves the monitoring and control of the combustion air-fuel ratio inside the furnace to ensure product quality and compliance with exhaust emission standards. It is widely used in the atmosphere control of various coal-fired, oil-fired, and gas-fired furnaces.
5
2
Share

What Causes Windshield Wiper Noise?

The causes of abnormal noise in car windshield wipers include: 1. Looseness at the U-joint contact area of the wiper arm or aging/wear of the rubber blade; 2. Incorrect wiper arm angle, causing the wiper to exceed a 0-degree angle with the glass surface; 3. Sticky glass surface, often due to a difficult-to-remove mixed oil film formed from lack of cleaning. When using windshield wipers, regularly inspect the wiper blades. Pay attention to the following when checking wiper operation: 1. First moisten the windshield with water; otherwise, it may scratch the glass, and the high friction resistance could damage the blade or burn out the motor; 2. After turning off the wiper switch, the wiper blade should return to the lower side of the windshield and stop.
20
2
Share

How to Operate the Rearview Mirror Switch?

The operation method of the rearview mirror switch: The rearview mirror button is located on the control panel on the left side of the driver's seat. Move it to the L position of the rearview mirror switch and rotate left or right to adjust the left rearview mirror. Move it to the R position to adjust the right rearview mirror. Move it to the 0 position to turn off the adjustment. The car's rearview mirrors are located on both sides of the front of the car and inside the front of the car. They are used to reflect the situation behind the car, to the side of the car, and below the car, allowing the driver to see these areas clearly and expand the driver's field of vision. Rearview mirrors are made with two types of mirrors: one is a flat mirror, and the other is a convex mirror.
7
4
Share

What to Do When Water Gets into the Car's Tail Light?

Methods for dealing with water in the car's tail light: 1. For minor water ingress, you can turn on the car lights for a period of time. The heat generated by the vehicle will help the moisture inside evaporate and escape through the vent pipe, causing minimal impact overall. 2. If the water ingress is severe, it is necessary to promptly remove the lamp cover, disassemble it, and then dry it out. Vehicles are equipped with various lighting and signaling devices to ensure driving safety and operational reliability. These devices are used to illuminate the road, indicate the vehicle's width and position, light up the interior, display instrument panels, and facilitate nighttime vehicle maintenance. Additionally, they should emit light or sound signals during turning, braking, meeting, parking, reversing, and other conditions to alert pedestrians and other vehicles.
8
1
Share

Can Ordinary Rearview Mirrors Be Upgraded with Heating Function?

Ordinary rearview mirrors can be upgraded with heating function, but the wiring must comply with safety standards. The rearview mirror heating function refers to the ability of the mirror to be heated by electric heating wires embedded behind the lens during rainy, snowy, or foggy weather, ensuring a clear surface. For vehicles equipped with heated rearview mirrors, simply turning on the rear window defroster switch in winter will activate the heating function, quickly melting frost or ice on the mirrors, providing great convenience for drivers. The principle of electric heating mirrors involves installing an electric heating element inside the lens of both side mirrors. During rain or snow, when the heating function is activated, the heating element rapidly warms up to a fixed temperature (usually between 35 to 60 degrees Celsius) within minutes, effectively defogging and defrosting the mirror surface.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.