Is a car that has been in stock for 9 months considered a stock car?

2 Answers
LeHaley
08/28/25 2:09am
A car that has been in stock for 9 months is considered a stock car. Definition of a stock car: Refers to a car that has been in stock for more than 6 months without being sold. Impact of stock cars: Paint damage, rubber aging, fluid deterioration, mechanical rust, and battery aging. Identifying a stock car: The nameplate in the engine compartment will have the manufacturing year and month marked on it. The time elapsed from now is the actual stock time of the car. The storage conditions of the stock car can be judged by checking the rubber parts on the car. Observe the car's paint surface to see if there are any scratches or dents on the body. Since stock cars are usually quite dirty, you can wash the car and inspect it carefully. Ultimately, it depends on the vehicle itself. Purchasing a stock car: Check the appearance, mechanics, ground, tires, etc.
Was this review help?
4
3
Share
McJoshua
09/09/25 7:36am
In the automotive industry, a car that has been sitting for 9 months is usually classified as inventory stock, with the general standard being over six months. When left idle for extended periods, vehicles may develop issues such as battery drain, flat-spotted tires, or oil sedimentation affecting performance. While it doesn't constitute severe aging, buyers should carefully inspect the vehicle's condition. It's advisable to request maintenance records from the dealer and use this as leverage for price negotiation. There's no need to fear the 'inventory car' label—thorough inspection can prevent potential issues. I've personally seen many friends purchase such vehicles; with proper maintenance, they can last just as long.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

Can 12123 Handle Not Wearing a Seat Belt?

Drivers who violate the seat belt regulation can pay fines online through the traffic management platform 12123. Binding a bank card allows for fine payment. Below are the specific functions of car seat belts: Protecting passenger safety: Car seat belts can protect passenger safety, especially on highways where rear passengers need to wear seat belts. A seat belt buckle is a device that can be inserted into the car's seat belt socket, preventing the seat belt alarm from sounding if the driver does not buckle up. Ensuring driving safety: Seat belts are the only guarantee of driving safety for drivers. Even when driving at relatively slow speeds, in the event of a collision or emergency braking, the resulting inertial force, though relatively small, is still enough to prevent drivers and passengers from controlling their bodies, leading to collisions with hard components such as the steering wheel and windshield, causing bodily harm.
1
0
Share

Does Not Wearing a Seat Belt Count as One Violation per Capture?

No, it does not count as one violation per capture; only one penalty is issued. If a driver passes through one monitoring section without wearing a seat belt and continues to do so in the next monitored section, the penalties will not accumulate. For continuous similar traffic violations by the same driver on the same day, only one penalty will be imposed. Below are the relevant details: Regulation: According to Article 51 of the 'Road Traffic Safety Law of the People's Republic of China,' drivers and passengers must wear seat belts as required while the vehicle is in motion. Violations will result in corresponding penalties. Penalty: When driving on roads other than highways or urban expressways, failure to wear a seat belt as required will result in a fine without point deduction. When driving on highways, failure to wear a seat belt as required will result in a fine and a deduction of 2 points.
9
2
Share

What is the Difference Between H Tires and V Tires?

The difference between H tires and V tires lies in their speed ratings: H tires are rated for speeds up to 210 kilometers per hour, while V tires are rated for speeds up to 240 kilometers per hour. Tires are circular elastic rubber products mounted on various vehicles or machinery, typically installed on metal rims. Their functions include: 1. Supporting the vehicle body and cushioning external impacts; 2. Ensuring contact with the road surface and maintaining driving performance. Tire maintenance methods include: 1. Monthly tire pressure checks; 2. Regularly monitoring tire wear indicators; 3. Paying attention to tire expiration dates; 4. Periodic wheel alignment and balancing; 5. Developing good driving habits.
5
2
Share

What type of suspension does the Hongqi H5 use?

The Hongqi H5 is equipped with a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear. Taking the 2020 Automatic ZhiLian QiChang Edition Hongqi H5 as an example, its body dimensions are: 4945mm in length, 1845mm in width, and 1470mm in height, with a wheelbase of 2875mm, front track of 1600mm, rear track of 1590mm, and a fuel tank capacity of 58 liters. The 2020 Automatic ZhiLian QiChang Edition Hongqi H5 is powered by a 1.8T turbocharged engine, delivering a maximum horsepower of 197PS, maximum power of 145kW, and maximum torque of 320Nm, paired with a 6-speed automatic transmission.
11
2
Share

What are the consequences of not replacing the engine mount rubber?

The main symptoms of a damaged engine mount rubber that is not replaced include: steering wheel vibration at idle, body vibration, and loud body resonance noise. Location of the engine mount rubber: In ordinary sedans, the engine mount rubber consists of a rubber elastic block with two separate screws installed above and below it. The upper screw is attached to the engine, while the lower screw is attached to the vehicle frame, relying on the middle rubber block for elastic cushioning. Function of the engine mount rubber: The engine mount rubber is the rubber buffer block that connects the engine to the vehicle frame, serving to reduce the transmission of engine vibrations to the cabin. Since the engine generates some vibrations during operation, this component is designed during car manufacturing to prevent these vibrations from being transmitted to the cabin.
2
5
Share

What does the triangular filled area mean?

Triangular filled area refers to the channelizing line. Below is a partial introduction about the triangular filled area: Definition: It primarily consists of one or several white V-shaped lines or diagonal lines set according to the terrain of the intersection, indicating that vehicles must drive along the prescribed route and are not allowed to cross or drive over the lines. It is mainly used for wide, irregular, or complex intersections with challenging driving conditions. The purpose is to ensure that every vehicle can "stay in its lane," serving to regulate, guide, and warn traffic. Traffic regulations: According to Articles 38 and 44 of the Traffic Law, channelizing lines are a type of prohibited marking. Vehicles must drive along the prescribed route and are not allowed to cross or drive over the lines, nor are they permitted to make U-turns or park arbitrarily within the channelizing line area. Violations may result in a penalty of 3 demerit points for the driver.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.