Is a car involved in an accident no longer exempt from inspection?

2 Answers
SanAdalynn
07/29/25 11:45am
As long as there is no major traffic accident, motor vehicles can enjoy the policy of exemption from inspection. Here is relevant information about inspection exemption: Major accidents: In the event that a motor vehicle is involved in a traffic accident resulting in casualties, it can no longer enjoy the policy of exemption from inspection. This is an important point to note. Inspection exemption mark: The mark must not be overdue. Vehicles that fail to obtain the inspection qualification mark on time are not allowed to drive on the road. If such a vehicle is caught by traffic police, the driver's license will be deducted 3 points and a fine will be imposed. If the vehicle is involved in a traffic accident during this period, the insurance company has the right to refuse compensation.
Was this review help?
16
1
Share
SanJuniper
08/13/25 8:27pm
Recently, my car had a minor accident. I reported it to the insurance, got it repaired, and it happened to be during the annual inspection period. A friend told me that the exemption policy still applies because the exemption mainly depends on the age of the car. For new cars, the first 6 years generally qualify for exemption from on-site inspection, only requiring the application for an inspection decal every 2 years. Filing an insurance claim itself doesn’t directly invalidate the exemption unless the accident is too severe, such as frame deformation, which may require additional safety checks after repairs. After the minor scrape, the mechanic said the car was in good condition and there was no issue. It’s advisable to ensure the car is properly repaired after an insurance claim and not to overlook safety concerns. Before the annual inspection, check the vehicle’s condition to ensure everything complies with regulations. After all, road safety comes first—don’t stress over the exemption issue due to a minor accident. Staying informed about local traffic rules is always a good idea.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

How to Reset the Maintenance Light on a 2019 Honda Lingpai?

Here is the method to reset the maintenance light on a 2019 Honda Lingpai: 1. Start the vehicle and press the TRIP button on the instrument panel; 2. Hold until the OILLIFE button and mileage start flashing, then release, and the maintenance light will be reset. Below is more information about the 2019 Honda Lingpai: 1. The 2019 Honda Lingpai is a new strategic mid-size model under GAC Honda, with dimensions of 4650mm in length, 1750mm in width, and 1505mm in height, a wheelbase of 2650mm, and is positioned as a compact car. 2. The 2019 Honda Lingpai is equipped with a P10A3 1.0T inline three-cylinder engine, delivering a maximum power of 122 kW and a peak torque of 173 Nm.
2
2
Share

Where is Dongfeng Nissan Company located?

Dongfeng Nissan Company is located in Huadu, Xiangyang, Zhengzhou, and Dalian. The headquarters and Huadu plant focus on the production of entry-level and mid-level sedans; the Xiangyang plant mainly produces high-end models; the Zhengzhou plant is primarily responsible for SUV models and Venucia brand vehicles; the Dalian plant is planned to produce NISSAN brand models. Below is more information about Dongfeng Nissan: 1. Manufacturing base distribution: Dongfeng Motor Corporation was founded in 1969 and is one of the three major automotive groups in China. Its main manufacturing bases are distributed in Shiyan, Xiangfan (now Xiangyang), Wuhan, Guangzhou, Zhengzhou, Yancheng, and other locations. 2. Main business: The main business includes a full range of commercial vehicles, passenger vehicles, automotive parts, and automotive equipment. 3. Development strategy: Dongfeng Motor Corporation participates in international competition and cooperation, following the development strategy of 'integrated development, cooperative competition, strengthening and expanding, with priority given to strengthening.'
17
1
Share

Do You Need to Press the Brake When Starting in Automatic Gear?

Automatic transmission vehicles have two design modes: one requires pressing the brake to start, while the other can start without pressing the brake. Below is relevant information about automatic transmission vehicles: 1. Situations requiring pressing the brake: Most automatic transmission vehicles do not require pressing the brake when starting, unless they are in N gear without the handbrake engaged. In such cases, pressing the brake is necessary for safety reasons. 2. How automatic transmission works: When starting in P gear, shifting to other gears requires pressing the brake. Without pressing the brake, the gear lever cannot be moved. Some push-to-start models cannot start without pressing the brake. Keyless models have only one start/stop button, distinguishing between power ON and ignition states based on whether the brake is pressed. When shifting from D gear to N gear in an automatic transmission vehicle, pressing the brake is not required; the gear can be shifted directly from D to N.
18
3
Share

What Causes Brake Noise Immediately After Washing the Car?

Reasons for brake noise after washing the car are as follows: 1. Water enters the wheel's brake drum during washing, and sand particles splash onto the brake pads along with the water, causing noise when braking. 2. It is recommended not to park the car immediately after washing. Instead, consciously drive a certain distance and perform multiple braking actions to expel the water from the brake drum and prevent issues. Below are specific methods for maintaining car brake components: 1. Driving with the handbrake engaged causes greater wear to the brake components as speed increases, and also damages the tires to some extent. 2. Develop correct driving habits. Before driving, check if the handbrake is released and pay attention to the dashboard. 3. Relatively speaking, the dashboard displays the most comprehensive information. By constantly observing the dashboard and paying attention to warning lights, you can avoid driving with the handbrake engaged.
8
2
Share

How many kilometers can the 10th-generation Accord travel on a full tank of fuel?

Under normal driving conditions, it can travel approximately 700-800 kilometers. More details about the 10th-generation Accord are as follows: 1. Powertrain: This model offers two powertrain options, equipped with a 1.5T turbocharged engine and a 2.0L naturally aspirated engine respectively. The 2.0L variant is a hybrid model, featuring a powertrain combination of a 2.0L engine and an electric motor. 2. Transmission system: The fuel-powered version is paired with a CVT continuously variable transmission, while the hybrid version is matched with an E-CVT continuously variable transmission. 3. Fuel efficiency: Compared to other models in the same class, the Accord demonstrates relatively lower fuel consumption. It is equipped with the Earth Dreams series engine, which incorporates advanced technologies such as direct injection, i-VTEC, variable intake manifold, high compression ratio, and lightweight cylinder design. These cutting-edge engine technologies not only enhance the engine's performance but also improve its fuel economy.
8
4
Share

How Often Should the Mondeo Radiator Be Refilled?

Mondeo radiator coolant needs to be refilled when it reaches the minimum or warning line. The car radiator generally refers to the heat exchanger. The heat exchanger is part of the car's cooling system. The radiator in the engine water cooling system consists of three parts: the inlet chamber, outlet chamber, main plate, and radiator core. The maintenance methods for the car radiator are as follows: 1. Park the vehicle and turn off the engine. After the coolant temperature drops, open the expansion tank and add radiator cleaner; 2. Start the engine and let it idle for 5-10 minutes after the cooling fan starts working; 3. Turn off the engine and remove the front bumper of the vehicle. When removing, ensure all fixing screws are loosened, and then slowly remove from both ends to the middle, being careful not to break the fixing clips; 4. After ensuring the coolant temperature has completely cooled, drain the radiator cleaner along with the coolant, and finally replace it with new engine coolant.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.