···
Log in / Register

Is a Buick tire pressure of 208 normal?

4 Answers
PhoebeFitz
07/29/25 11:29am

A Buick tire pressure of 208 is not quite normal, it's a bit low, and it is recommended to replenish the tire pressure. The normal tire pressure for cars is between 2.3 and 2.5. Tire pressure is affected by seasonal factors: Tire pressure should be slightly lower in summer because the high temperatures can cause the tires to heat up, and high pressure can lead to blowouts. In winter, tire pressure should be a bit higher than in summer due to thermal contraction and expansion. Hazards and effects of tire pressure on driving: Low tire pressure reduces the friction and adhesion of the tires, affecting braking performance. It can cause steering wheel vibration and deviation, reducing driving comfort. It accelerates the wear of the central tread pattern, shortening the tire's lifespan. Increased body vibration can indirectly affect the lifespan of other components.

Was this review help?
19
4
Share
DelElle
08/13/25 7:12pm

Our family has been driving Buick cars for many years, and we find that the tire pressure is most comfortable when maintained between 230 to 240 kPa. 208 kPa sounds a bit low, especially in cold weather when tires tend to lose pressure more easily. Insufficient tire pressure can cause increased tire deformation, making the car feel unstable while driving and causing more noticeable sway during turns. It also leads to higher fuel consumption, adding about half a liter per 100 kilometers. Over time, this can accelerate wear on the tire sidewalls, resulting in costly early replacements. Different Buick models have varying standard pressures, usually detailed on a sticker on the driver's side door frame. I recommend checking the owner's manual for precise recommendations or using a tire pressure gauge to test all tires when they are cold, inflating them to at least 220 kPa. Developing a habit of checking tire pressure monthly ensures both safety and cost savings.

Was this review help?
3
1
Share
Expand All
CourtneyFitz
10/08/25 4:38am

208 kPa is not normal for Buick tires, my car's recommended value is around 235 kPa. If the tire pressure is too low, the tire will work inefficiently like a deflated balloon, making the ride noticeably bumpy and more dangerous at high speeds. I recall last summer when my tire pressure was 190 kPa, I almost lost control during a high-speed turn—fortunately, I inflated them in time. Not only does it consume more fuel, but it also causes the tires to overheat, increasing the risk of a blowout. Most Buick models require tire pressure between 220 to 250 kPa—check the door label for specifics. I recommend going to a gas station or repair shop for a free top-up and adjusting it to the standard 230 kPa for a smoother ride. Don’t forget to check the spare tire—it’s just as important.

Was this review help?
14
2
Share
Expand All
OwenLee
11/21/25 5:57am

The Buick's tire pressure at 208 kPa is slightly low. The standard range is typically 220 to 240 kPa, with minor variations depending on the vehicle model. Low tire pressure increases rolling resistance, affects handling, and makes turns feel sluggish. More importantly, it raises fuel consumption, causes excessive wear on tire shoulders, and may shorten tire lifespan by two to three years if driven long-term. It's advisable to check tire pressure when the tires are cold and inflate to the recommended value in the manual, such as around 230 kPa. Regular maintenance can reduce these issues and ensure safe, efficient driving.

Was this review help?
15
0
Share
Expand All
More Forum Discussions

What to Do When Your Car Battery Is Dead?

Check if the battery terminals are loose. Generally, there are clips on the positive and negative terminals of the battery. Inspect whether they are loose or have rust. If there is rust, it is recommended to remove it and then try to start the engine. First, you need to find a rescue vehicle and connect the battery cables of both cars properly. The red cable represents the positive terminal, and the black cable represents the negative terminal. Then, directly connect the two cars to the corresponding positive and negative terminals. After connecting, the rescue vehicle should start first, then power the rescued vehicle to attempt ignition.
16
3
Share

How to Remove the Gear Knob of Baojun 630?

First, inspect the gear knob of the SAIC-GM-Wuling Baojun 630 Start by prying off the plastic cover on the gear knob of the SAIC-GM-Wuling Baojun 630 Next, remove the clip under the dust cover of the SAIC-GM-Wuling Baojun 630 gear knob Finally, pull it hard to remove the gear knob of the SAIC-GM-Wuling Baojun 630
7
3
Share

How to Repair Scratches on Aluminum Alloy Wheels?

If the scratch has not reached the inner side of the wheel, it can be easily repaired. Use paint thinner to wipe around the scratch to remove dirt; For the deepest part of the scratch, dirt may be difficult to remove. In this case, use a toothpick to clean it thoroughly; Prepare the tip of a brush, apply touch-up paint, and let it dry, during which it will slightly shrink. After drying, use waterproof paper dipped in soapy water to smooth the surface. Once wiped with waterproof paper, use a polishing compound to restore shine, and then apply wax.
1
2
Share

How to release the P gear on Audi A6?

First, open the ashtray cover plate at the front of the gear lever and remove the ashtray box Use a key or screwdriver to pry out the black plastic piece at the bottom of the ashtray Insert the onboard screwdriver, ballpoint pen, or small wooden stick into the small hole on the left side, and press down vertically on the unlocking mechanism below the small hole While pressing down the unlocking mechanism, pinch the unlock button on the gear lever, and the gear can be smoothly released
19
5
Share

How to Report a Car Insurance Claim?

In the event of an accident, report the claim to the insurance company within 48 hours. After reporting, the insurance company will assign a specialist to investigate and assess the vehicle damage. For minor single-vehicle accidents, on-site damage assessment is conducted; for multi-vehicle or severe damage accidents, assessment is done at a designated damage assessment center. Handle the car insurance claim and submit the necessary documents. Submit all required documents to complete the car insurance claim process and receive the claim payment.
3
1
Share

How Does a 4S Shop Compensate for Oil Seal Leakage in a New Car?

If oil leakage occurs in a new car, you can drive the car to the 4S shop for inspection. If it's a minor issue, the 4S shop can replace the parts for free. If it's a more serious quality problem that causes the oil leakage, you can directly request the 4S shop to refund the car. If the 4S shop refuses to refund the car, you can file a lawsuit directly, in which case the 4S shop may have to refund the car and compensate three times the amount.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.