···
Log in / Register

Is a BMW X5 Water Temperature of 120 Normal?

4 Answers
DelJulianna
09/05/25 7:08am

BMW X5 water temperature at 120 is abnormal. The normal operating temperature for BMW engines is between 95-105 degrees Celsius. If the temperature exceeds 105 degrees, it indicates overheating, and you should check the coolant, thermostat, cooling fan, temperature sensor, radiator, and water pump. BMW X5 engine temperature gauge: It uses either a physical or virtual dial pointer display and shows a warning indicator when the temperature is too high. Generally, vehicles with larger engine displacements heat up faster, while those with smaller displacements heat up slower, which is directly related to the engine itself. When the engine's water temperature is too low, combustion within the engine becomes incomplete, affecting the lubricating properties of the coolant and leading to excessive emissions from the vehicle's exhaust. When the temperature is too high: It can easily cause the engine to overheat, leading to potential engine damage. If the car's temperature is too high, it's essential to check for issues, with coolant leaks being a common cause.

Was this review help?
17
3
Share
Gomez
09/17/25 7:24am

The coolant temperature soaring to 120°C? For a BMW X5, this is absolutely abnormal. Normal operating temperature fluctuates between 85-100°C, while 120°C indicates severe overheating that may cause critical engine damage. As an experienced mechanic, I'd immediately raise alarms at this reading. Multiple culprits could be at play: low coolant level, stuck thermostat failure, faulty water pump impairing circulation, or clogged radiator hindering heat dissipation. Ignoring it risks cylinder head warping or engine seizure, potentially incurring repair bills over ten thousand. My urgent advice: 1) Park immediately and inspect coolant level - top up if low; 2) Check radiator fan operation when engine's warm. Never continue driving. Visit a professional workshop for diagnostic scans to pinpoint the root cause. Remember: regular cooling system maintenance is key to prevention.

Was this review help?
10
1
Share
Expand All
ElainaLee
10/31/25 7:53am

My family has been driving a BMW for over a decade, and a 120-degree water temperature is a major warning sign. The normal range is around 90 degrees, and 120 degrees indicates the engine is dangerously overheating. Last time, my neighbor's X5 had its temperature warning light come on, and he ignored it, nearly causing engine damage. I believe it's crucial to stay calm in such situations: after stopping the car, turn on the heater to assist with cooling, and check the coolant reservoir for cracks or leaks. If the fan isn't running, it's often a relay issue. It's essential to develop good habits, like changing the coolant every six months to prevent aging. Addressing abnormal water temperature promptly can save significant repair costs, and safe driving is always the top priority.

Was this review help?
16
5
Share
Expand All
HadleyLee
12/14/25 8:02am

The BMW X5's coolant temperature is high at 120°C. The normal range is 85-105°C, and 120°C likely indicates overheating. Possible causes include low coolant level, thermostat malfunction, or radiator blockage. It's recommended to stop the vehicle immediately and check: verify the coolant level and observe if the cooling fan operates when the engine is warm. If abnormalities are found, avoid driving and head straight to a repair shop to prevent further damage.

Was this review help?
7
3
Share
Expand All
More Forum Discussions

Where is the hazard warning light and how to turn it on?

The hazard warning light is located on the center console, marked by two overlapping red triangles. Turn on the hazard lights in rainy weather to alert other vehicles of your presence. In case of an emergency malfunction while driving, you should turn on the hazard lights, headlights, and use the horn simultaneously.
7
0
Share

How to Reset the Subaru Power Tailgate?

Press and hold the power tailgate button on the left side of the door to close the tailgate. After closing, press the button once more to automatically restore the settings. The car's power tailgate, also known as an electric trunk, refers to the trunk that can be opened or closed using electric power or remote control.
10
1
Share

Can You Release the Clutch Immediately After Shifting Gears in Subject Three?

You cannot release the clutch immediately. The relevant explanation is as follows: Operation requirements: The clutch operation should follow the sequence of 'slow release for first to second gear, slow release for second to third gear, quick release for third to fourth gear, and quick release for fourth to fifth gear.' When the vehicle speed is slow, the clutch should be released gradually; otherwise, the jerking sensation will be strong. Once the speed increases, quickly releasing the clutch will hardly produce any jerking sensation. Clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. During driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and transmission, thereby cutting off or transmitting the engine's power to the transmission. The clutch is a commonly used component in mechanical transmissions, allowing the drivetrain to be disconnected or engaged at any time.
16
4
Share

How Does the Insurance Company Compensate After a Car is Flooded?

Waterlogging insurance refers to the situation where the engine is directly damaged due to water ingress during vehicle use, and the insurance company is responsible for compensation. Comprehensive vehicle damage insurance has been renamed as comprehensive commercial insurance for motor vehicle loss, which includes all additional insurance types, eliminating the need to purchase waterlogging insurance separately.
1
2
Share

What Causes the Steering Column Noise in Toyota Camry?

Toyota Camry steering wheel and steering noise may be caused by insufficient lubrication of the steering column, resulting in high friction; low power steering fluid level; issues with universal joints; aging and hardening of suspension stabilizer bar bushings; or damaged thrust bearings. Below is more relevant information: Load on Toyota Camry steering gear: From the perspective of steering gear principles, the Toyota Camry achieves vacuum assistance, but this only reduces the driver's control effort—the actual load on the steering gear remains unchanged. Therefore, an effective way to reduce steering gear wear is to minimize its operational load. Aging and safety hazards: Car enthusiasts should develop the habit of turning the steering wheel only after the wheels start moving. This reduces friction between the tires and the ground, lessens excessive load on the steering gear, and prevents over-wear of the steering linkage system, which can cause noise when turning. Long-term stationary steering: Not only does this place significant load on the steering gear, but it also accelerates tire surface wear and shortens tire lifespan. To change this habit, quickly turn the steering wheel when the wheels are slightly moving to achieve the desired control.
8
5
Share

How to Handle Vehicle Annual Inspection via 12123 Traffic Management?

After logging into the Traffic Management 12123 APP, enter the process for applying for the exemption inspection mark. Users can apply for the exemption inspection mark for their own registered motor vehicles. Users select the motor vehicle for which they need to apply for the exemption inspection mark. Click [Read and Agree] to enter the vehicle information confirmation page. Confirm the vehicle information, including license plate type, license plate number, vehicle status, inspection expiration date, compulsory traffic insurance effective date, and compulsory traffic insurance termination date.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.