Is a Beijing Entry Permit Required for Areas Outside the Sixth Ring Road?

2 Answers
SanDonovan
08/26/25 4:11am
No, a Beijing Entry Permit is not required for areas outside the Sixth Ring Road. There are agencies at the entrances of Beijing's highways and national roads where you can apply for the Beijing Entry Permit. The Beijing Entry Permit is a required pass for non-local vehicles entering areas within Beijing's Sixth Ring Road (excluding the main roads of the Sixth Ring Road). The permit is valid for 7 days, or 3 days during special periods (such as during the Olympics or National Day holidays). Failure to obtain the permit may result in a penalty of 3 demerit points and a fine of 100 yuan. Below are the documents required for applying for a Beijing Entry Permit: 1. A green environmental compliance label or a vehicle exhaust inspection certificate issued by the local municipal environmental protection department; 2. Compulsory traffic insurance label, inspection compliance label, and the driver's license, ID card (or household registration booklet) and other valid documents; 3. The vehicle's registration certificate within the inspection period. In addition to the applicant's own ID, the vehicle's registration certificate is also required; otherwise, the application will not be processed.
Was this review help?
3
0
Share
DiDawson
09/08/25 5:21am
I just drove to Beijing to visit relatives and am very concerned about the Beijing Entry Permit issue. If your car doesn't enter within the Sixth Ring Road, you really don't need to apply for the permit. Beijing's policy clearly states that vehicles with non-local license plates must obtain the permit only when entering within the Sixth Ring Road. Suburban areas outside the Sixth Ring, such as Yanqing and Shunyi, are freely accessible. I checked on the app and consulted with the traffic authorities—it's completely fine if you don't enter the Sixth Ring. However, pay attention to route planning. For example, when taking the highway, avoid exiting at the Sixth Ring interchange, or you might accidentally enter and face trouble. Some navigation apps will remind you to avoid restricted zones—setting them up can save you time and hassle. For daily driving, I also recommend checking your vehicle's condition and the validity of your driver's license to ensure everything goes smoothly—safety always comes first.
Was this review help?
7
0
Share
Expand All
More Forum Discussions

How to Warm Up an Automatic Transmission Car in Winter?

Methods for warming up an automatic transmission car in winter: 1. Idling in place: After starting the car, it is necessary to let it idle for a while. This period should last about 30 seconds to 1 minute (with the gear in P), primarily to allow the engine oil to fully lubricate the engine. Since winter temperatures are inherently low, the oil's fluidity is poor, and the viscosity of the transmission fluid in the automatic transmission increases. If you start driving immediately, it can cause significant harm to the engine. 2. Slow driving: After idling for 30 seconds to 1 minute, once the engine vibration stabilizes, you can begin driving. At this point, shift the car into D gear, keeping the RPM below 2000, and drive slowly for about 5 minutes. Meanwhile, observe whether the temperature gauge needle approaches 60 degrees or if the blue indicator light on the dashboard turns off. When the temperature needle reaches 60 degrees, it indicates that the warm-up is complete, and you can accelerate normally. During this period, the automatic transmission will not shift gears, allowing various types of lubricants and fluids to be distributed to their respective working positions through the warm-up process. This helps the steering system, braking system, differential system, suspension system, etc., transition from a static state to an operational state, ensuring proper lubrication and preventing abnormal wear due to insufficient lubrication (since idling in place without moving cannot achieve this). 3. After starting the car, wait a while before driving or turning on the air conditioning, and avoid idling in place for too long.
7
5
Share

How to Play Bluetooth Music in Buick GL8?

Enable the vehicle's Bluetooth function, and after successfully pairing with your phone, you can play music on the vehicle's Bluetooth device. Here is some relevant information about the Buick GL8: 1. Configuration: The new generation Buick GL8 family is equipped with the next-generation OnStar Assistant, offering over 50 main services across 5 categories, including remote control, remote vehicle condition viewing and alerts, and provides users with 100GB of "OnStar 4G LTE in-vehicle application lifetime free data" service annually. 2. Body Dimensions: The new generation Buick GL8 Avenir family has body dimensions of 5219mm × 1878mm × 1799mm, with a wheelbase of 3088mm.
11
3
Share

Is ETC still free to apply for now?

As of May 2020, there are no free ETC applications available, as free ETC processing was discontinued at the end of 2019. The details are as follows: 1. Promotional measures: To encourage vehicle owners to actively apply for ETC, a series of measures were introduced in 2019 in collaboration with telecommunications companies. Users could apply for ETC for free, and those using ETC were given a 5% discount on toll fees, with some routes offering a 15% discount for trucks. 2. Limited to the end of 2019: Various partner banks also continuously rolled out promotional measures for applying and using ETC to attract customers. It is reported that the free ETC application policy was only available until the end of 2019. After January 1, 2020, vehicle owners could no longer apply for ETC for free.
4
2
Share

What Causes the Steering Wheel to Make Abnormal Noises When Turning in Place?

It is mainly caused by interference friction between the drive shaft and the dust cover. Below is relevant information about the steering wheel: 1. Introduction: A wheel-shaped device used to control the direction of cars, ships, airplanes, etc. This new design of the steering wheel emerged as needed, introducing a gear system between the driver and the wheels that operates flexibly and effectively isolates intense vibrations from the road. 2. Function: The steering wheel is generally connected to the steering shaft via splines. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. Using a larger-diameter steering wheel reduces the hand force required from the driver when turning. The steering drive shaft, as a connecting component between the steering gear and the steering shaft, facilitates the standardization of the steering gear, compensates for errors during manufacturing and installation, and makes the installation of the steering gear and steering wheel in the vehicle more rational.
15
1
Share

How to Test Car Tire Pressure?

The method for testing car tire pressure is to use a tire pressure gauge or observe the dashboard to determine the tire pressure condition. The following are the effects of excessive tire pressure: 1. Impact on braking performance: The friction and adhesion of the tire will decrease, affecting braking performance. 2. Reduced comfort: It can cause steering wheel vibration and deviation, reducing driving comfort. 3. Decreased tire lifespan: It accelerates the localized wear of the tread pattern in the center of the tire, reducing its lifespan. 4. Impact on component lifespan: Increased body vibration indirectly affects the lifespan of other components.
19
3
Share

Can a sedan accommodate five people?

If the vehicle's rated passenger capacity is 5 (including the driver) or more, it can accommodate them; otherwise, it cannot. Below is relevant information about the hazards of vehicle overloading: 1. Shortens the vehicle's service life: Vehicles are manufactured based on technical specifications, and load limits are no exception. Overloading alters the original design parameters. For example: rivets may loosen, fastening screws may fall off, weld points may crack or break, and the entire frame may deform. Overloading reduces the vehicle's lifespan and accelerates the aging of rubber and plastic components. 2. Accelerates tire wear and deformation: Vehicle tires are designed and produced according to the total weight of the vehicle, with a considerable safety margin. However, when a vehicle is overloaded, the tires bear excessive weight and deform. Increased friction also shortens tire life. Tests show that with a 20% overload, tire life decreases by 30%; with a 40% overload, tire life is halved. 3. Reduces braking performance and increases the non-safety zone distance: Many factors affect a vehicle's braking distance, among which changes in vehicle load directly influence the braking distance. When a loaded vehicle brakes, the load shifts forward, increasing the load on the front wheels and decreasing it on the rear wheels.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.