···
Log in / Register

Is a 90°C water temperature normal for an Audi Q5?

4 Answers
Miller
07/30/25 12:10am

Audi Q5's water temperature between 80°C and 90°C is considered normal. Reasons for overheating: One common cause of overheating is insufficient coolant, which often occurs when owners neglect timely top-ups. It's crucial to note that when adding coolant, you must use the same brand and model to prevent chemical reactions between different formulations that could render the antifreeze ineffective. Another possibility is leakage causing coolant loss - owners should carefully inspect for leaks and repair them promptly. Reasons for low temperature: Low water temperature may indicate cooling fan malfunction. Normally, fans only operate when temperature is high and remain inactive at normal or lower temperatures. Another potential cause is thermostat failure. The thermostat regulates coolant flow into the engine water jacket based on temperature readings. If defective, uncontrolled continuous coolant flow into the engine for cooling will cause temperature drops.

Was this review help?
8
5
Share
KimberlyMarie
08/16/25 4:13am

Yes, it's completely normal for the Audi Q5's coolant temperature to be at 90°C. I drive a 2018 Q5 myself, and whether it's daily commuting or long-distance trips, the temperature consistently stays around 90°C, with the engine running smoothly and efficiently. Audi's cooling system is designed to maintain this temperature range, optimizing combustion and fuel efficiency. If the temperature suddenly rises above 100°C, it might indicate a clogged radiator or a faulty fan; if it's too low, say around 70°C, the thermostat could be malfunctioning. I make it a habit to monitor the temperature change a few minutes after starting the engine to avoid overheating and damaging components. Regularly checking the coolant level and color can help prevent major repairs. On cold starts, the temperature gradually rises to 90°C, which is a sign of good design.

Was this review help?
13
4
Share
Expand All
VonMargaret
10/19/25 6:22am

A water temperature of 90 degrees Celsius is perfectly normal for an Audi Q5. As a car enthusiast, I've studied Audi engines, and their operating temperature is typically set between 90 to 105 degrees to ensure optimal performance. Occasional fluctuations up to 95 degrees during daily driving are fine, but sustained high or low temperatures should raise concerns about coolant leaks or water pump failure. I prefer using an OBD scanner to check the actual temperature, as it's more accurate than the dashboard display. For maintenance, it's recommended to change the coolant every two years, especially since the turbocharged engine in the Audi Q5 is sensitive to heat dissipation. The stable water temperature during high-speed driving demonstrates the reliability of Audi's system, but abnormal fluctuations should prompt an immediate stop for inspection.

Was this review help?
8
5
Share
Expand All
McSabrina
12/02/25 6:57am

90 degrees is the normal operating temperature for the Audi Q5. I've serviced many Q5 models, and engineers designed this temperature as the target for optimal engine efficiency. If the temperature exceeds 100°C, check if the coolant level is low or if the water pump is functioning properly; if it's below 80°C, the thermostat might be stuck. In practice, the warning light will illuminate to alert you, but 90°C itself is not an issue. Remember to regularly inspect the radiator and fan to prevent minor issues from escalating, such as performing simple maintenance before long summer trips.

Was this review help?
16
4
Share
Expand All
More Forum Discussions

How to Change the Clutch Fluid in a Tiggo 3

The steps for changing the clutch fluid in a Tiggo 3: 1. Open the driver's door and lift the engine hood; 2. Prepare a soft tube and a glass container filled with clutch fluid, connect one end of the tube to the bleeder screw and immerse the other end in the glass container with clutch fluid; 3. Loosen the bleeder screw and then check the free travel of the clutch pedal; 4. Tighten the bleeder valve and release the pedal, then check the free travel again. If the travel is too large, continue bleeding until the free travel is appropriate, and the clutch fluid is successfully changed. The Tiggo 3 features a stylish interior, authentic urban off-road SUV driving control, and the latest Cloudrive 2.0 intelligent cloud-connected driving system, fully meeting the automotive needs of young consumers for an urban SUV.
19
5
Share

How to add Volkswagen G12 coolant?

Method for adding Volkswagen G12 coolant: 1. Use pliers to loosen the hose clamp of the radiator outlet pipe at the lower left corner of the engine compartment; 2. Open the pressure cap and drain the old coolant from the pipe; 3. Use an air gun to blow out excess coolant from the cooling system, then rinse with distilled water and blow until no coolant remains; 4. Add new coolant through the filling port, maintaining the liquid level between MAX and MIN, then securely close the filling port cap. Volkswagen AG is an automobile manufacturing company headquartered in Wolfsburg, Germany, founded by Ferdinand Porsche. Volkswagen's brands include Audi, SEAT, Skoda, Bentley, Bugatti, Lamborghini, and Porsche.
10
2
Share

What engine is used in the Fengguang 580?

Fengguang 580 is equipped with two types of engines: one is a 1.5-liter inline 4-cylinder turbocharged engine, and the other is a 1.8-liter inline 4-cylinder naturally aspirated engine. The maximum power outputs of these two engines are 139 horsepower and 150 horsepower, respectively. The 1.5T model is paired with either a 6MT or CVT transmission, while the 1.8L model is matched with a 5MT transmission. Fengguang 580 is an SUV under the Dongfeng brand, with a body size of 4690mm in length, 1845mm in width, and 1715mm in height, and a wheelbase of 2780mm. It offers flexible and versatile space, with the option of 5-seat or 7-seat configurations to meet diverse travel needs.
2
1
Share

How to Remove the Position Light on Lavida?

The method to remove the position light on Lavida: Open the engine hood, you can see the headlight dust cover, open the dust cover, locate the position light, and pull it out with force. The position light on a car refers to the front and rear position lights, commonly known as small lights, similar to the side marker lights. The location of the position light varies depending on the car model. The Lavida is a compact sedan under Volkswagen, with dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, and a wheelbase of 2688mm. The Lavida is equipped with three types of engines: a 1.2-liter turbocharged engine, a 1.4-liter turbocharged engine, and a 1.5-liter naturally aspirated engine.
6
4
Share

Is it necessary to perform maintenance after driving 5,000 kilometers?

It is not mandatory to perform maintenance after driving 5,000 kilometers, as it depends on the type of engine oil. For mineral oil, maintenance is required every 5,000 kilometers; for semi-synthetic oil, every 7,500 kilometers; and for full-synthetic oil, every 10,000 kilometers. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle. Routine maintenance typically involves changing the engine oil, oil filter, and air filter. Common car maintenance and repair items include: 1. Three filters: air filter, fuel filter, and oil filter; 2. Cleaning: intake tract cleaning, throttle cleaning, and fuel injector cleaning; 3. Oil replacement, wheel alignment, spark plug cleaning, and chassis inspection.
7
5
Share

How to Make the Battery Last Longer?

Methods to extend battery life: 1. Maintain the habit of charging as you use, avoid waiting until the vehicle's battery is completely depleted before charging, prevent overcharging and over-discharging, and reduce the number of full charge and discharge cycles; 2. Prefer slow charging methods and minimize the use of DC fast charging; 3. Keep the battery adequately charged when the vehicle is idle. Leaving an electric vehicle in a state of low charge can easily block the ion channels, leading to insufficient charging and a decrease in battery capacity; 4. Drive smoothly to reduce sudden acceleration. Instantaneous high-current discharge during driving can easily lead to the formation of lead sulfate crystals, damaging the physical performance of the battery plates; 5. Protect the electric vehicle's charging equipment. Deformation of the charger, poor contact, or oxidation of the contact surface can cause the charging plug to overheat or even short-circuit, damaging the charger and subsequently the battery.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.