Is a 32GB Memory Card Enough for a Dash Cam?

What is the fault code for insufficient turbo boost pressure?

P0299 fault code, applicable to all automobile manufacturers, means the turbo/supercharger is in a state of insufficient boost. This is generally caused by air leaks in the piping or the pressure relief valve being stuck open. It is necessary to check whether the turbocharger bypass valve and linkage mechanism are stuck, and whether the intake passage is blocked. Turbocharger: A turbocharger uses the inertial force of exhaust gases expelled by the engine to drive the turbine, which in turn drives the coaxial impeller to boost the intake air pressure, thereby increasing the vehicle's power. Note: Since turbochargers often operate at high speeds and temperatures, with the exhaust turbine side reaching around 600 degrees Celsius and the rotor spinning at 8,000 to 11,000 rpm, it is essential to maintain cleanliness, perform regular cleaning, and pay attention to maintenance to ensure the turbocharger functions properly.

2

3

Share

What are the differences between the Guangben URV and the Crown Road?

There are several main differences between the Guangben URV and the Crown Road: 1. Price: The official guide price of the GAC Honda Crown Road is slightly lower than that of the Dongfeng Honda URV. 2. Appearance: The URV and the Crown Road have very similar front faces, featuring Honda's family-style design. The headlights and the grille are connected under a chrome trim strip, with almost identical headlight assemblies. The front bumper and rear end are the key distinguishing features between the two. For example, the URV adopts a full-width taillight design, which visually appears more premium than the traditional taillights of the Crown Road. 3. Compared to the Crown Road, the URV's body length is increased by 9mm, and the height is increased by 1mm.

8

0

Share

What Causes Abnormal Noises When a Car is Driving at Low Speed?

Vehicle driving at low speed when there is abnormal noise reasons are as follows: 1. Excessive clearance between the piston and cylinder wall. 2. The piston pin is assembled too tightly or the connecting rod bearing is assembled too tightly. 3. Excessive clearance between the tappet and its guide hole. 4. Wear of the cam profile of the valve train. Solution for abnormal noise when the vehicle is driving at low speed: Do not try to solve it by yourself, you need to go to the 4S shop for professional maintenance personnel to check and repair according to the actual situation. More information about abnormal noise when the vehicle is driving is as follows: 1. Most common abnormal noises of the engine depend on the speed state of the engine. 2. There are also many abnormal noises in the engine that are obviously related to the load.

20

4

Share

Reasons Why the Thermostat Fails to Open?

Reasons why the thermostat fails to open are as follows: 1. Internal damage to the thermostat, caused by excessively high temperatures for valve opening and full opening. 2. Damage to the thermostat's opening valve, due to prolonged warm-up time and low water temperature. 3. Blockage in the water passage, caused by debris or dust near the water passage. 4. Frozen radiator, primarily due to extremely low temperatures or the absence of antifreeze. 5. Water temperature too low, mainly caused by the detachment of the main valve or leakage of the oil controlling the main valve's movement. Solutions are as follows: 1. Inspect the thermostat internally. 2. Replace the opening valve. 3. Clear the water passage. 4. Defrost the radiator.

1

2

Share

What should not be used to extinguish a motor vehicle fuel fire?

When a motor vehicle fuel fire occurs, water should not be used for extinguishing. Here are the relevant details: 1. Reasons for not using water: Water cannot be used to put out fuel fires because water has a higher density than oil. When oil and water are mixed, the oil will float on top of the water. Not only does this fail to extinguish the fuel fire immediately, but it may also spread the fuel and expand the fire area. 2. Correct actions during a fire: If a fire is discovered, quickly call the fire department at 119. When reporting the fire, provide clear details including the exact address, location of the fire, type of burning material, size of the fire, your name and phone number, and send someone to meet the fire truck at the intersection.

14

5

Share

How to Turn on the Heating in Audi Q5L?

Audi Q5L air conditioning heating adjustment, first use the one-touch start button to start the vehicle engine, wait for the engine coolant temperature to rise before turning on the air conditioning, then turn off the AC button, adjust the air volume and direction to your comfortable position, and set the temperature control to the red zone at your preferred comfort level to get warm air from the vents. Additional info: 1. The automobile air conditioning system is used to regulate and control the temperature, humidity, air cleanliness and airflow inside the vehicle cabin to optimal conditions, providing passengers with a comfortable riding environment and reducing travel fatigue; it creates good working conditions for the driver and plays an important role in ensuring safe driving. 2. It generally includes refrigeration, heating and ventilation devices. This combined system makes full use of the limited space inside the car, with a simple structure and easy operation, representing the internationally popular modern automobile air conditioning system.

17

3

Share

Is a 32GB Memory Card Enough for a Dash Cam?

What is the fault code for insufficient turbo boost pressure?

What are the differences between the Guangben URV and the Crown Road?

What Causes Abnormal Noises When a Car is Driving at Low Speed?

Reasons Why the Thermostat Fails to Open?

What should not be used to extinguish a motor vehicle fuel fire?

How to Turn on the Heating in Audi Q5L?

Is Vehicle Binding Mandatory for Handling Traffic Violations?

How to Switch Between Ventilation and Heating for Passat Seats?

Where is the fuse for the wipers located?

How to reset the seat memory on the Lynk & Co 01?