Is a 30 cm distance mandatory for the oncoming vehicle test in Subject 3?

1 Answers
DeTucker
07/30/25 10:34am
Subject 3 oncoming vehicle test requires a distance no greater than 30 cm. Below are detailed explanations regarding the oncoming vehicle test in Subject 3: 1. Reference point: Identify a reference point, such as a protruding point on the windshield wiper. When this point aligns with the solid line on the right side of the road, the vehicle's body is approximately 30 cm away. Alternatively, any prominent point on the vehicle can serve as a reference. Due to differences in height and viewing angles among drivers, reference points may vary. 2. Braking and deceleration: When performing the oncoming vehicle test, immediately apply the brakes to decelerate and shift to a lower gear in advance. During this test, attention is primarily focused on observing the distance and adjusting the direction. Most learners should avoid simultaneously steering and shifting gears while performing the oncoming vehicle test.
Was this review help?
11
0
Share
More Forum Discussions

What does the circle a button in the car mean?

The circle a button in the car refers to the auto-hold function, which is an extension of the electronic parking brake. Controlled by the ESP component, it manages the braking of all four wheels to prevent the vehicle from sliding. To activate it, simply press the button after starting the vehicle. The function of the circle a button in the car is to provide precise parking force through a slope sensor controlled by the system. During startup, the parking control unit calculates data from the clutch distance sensor, clutch engagement speed sensor, and throttle pedal sensor. When the driving force exceeds the running resistance, the parking brake is automatically released, allowing the car to start smoothly.
7
2
Share

What to do if the steering control unit of Audi A4 is damaged?

Audi A4 steering control unit damage can only be checked and replaced as an assembly at the 4S store. The following is a specific introduction to the Audi A4: 1. Appearance: The design of the Audi A4 door handle emphasizes ergonomic effects and perfect functionality. The pressure point of the handle is sensitive, making it easy to open the door. 2. Power: The Audi A4 3.0 comes standard with Audi's patented technology, the quattro all-wheel drive system, which provides double the adhesion for the vehicle. This system enables the vehicle to automatically, accurately, and timely distribute the ground force of each wheel when turning or braking on various complex road surfaces, thereby improving the directional stability and traction of the vehicle in complex situations. The multitronic continuously variable/manual integrated transmission, standard on the Audi A4 1.8T and 2.4, is an improvement in automotive transmission technology.
16
0
Share

What to Do When the Car Door Won't Open?

Classification of car door failure to open: 1. All four doors won't open: This is most likely because the driver has activated the central locking system. In most car models, the central lock automatically disengages when the vehicle speed exceeds 15 km/h. The purpose of the central lock is to prevent passengers from accidentally opening doors while the vehicle is in motion, thereby avoiding potential accidents. In this case, simply have the driver deactivate the central lock or manually pull the mechanical lock pin on any door to open it. 2. Rear doors won't open: If the rear doors remain unopenable even with the central lock disengaged, the only possible reason is that the child safety lock is engaged. Only rear doors are equipped with child safety locks, while front doors can only be opened using the interior handle or mechanical unlocking. 3. Remote key won't open doors: There are two main reasons for remote key failure: issues with the remote or RF transmitter, or problems with the main unit or door control module. First, check if the remote has sufficient battery power and replace if necessary. If battery isn't the issue, test other buttons on the remote (e.g., trunk release). If other buttons work normally, the problem lies with the door control module. When the remote key fails, mechanical key can be used temporarily - most car models unlock by turning clockwise and lock by turning counterclockwise. 4. Mechanical key won't open doors: If even the mechanical key fails to open the door, this typically indicates door lock mechanism damage. Normally, mechanical keys should work when used correctly. In case of door lock damage, contact a 4S dealership or professional repair shop for assistance.
16
3
Share

How to Solve Wiper Blade Chattering?

The solutions for wiper blade chattering are: 1. Replace with new wiper blades; 2. Lift the wiper arm, remove the blade, and adjust the angle between the arm and windshield until it fits snugly against the glass; 3. Have the motor inspected at a repair shop. The causes of wiper blade chattering are: 1. Aging or hardening of the wiper blade; 2. Bent wiper arm; 3. Insufficient motor power. The wiper, also known as a windscreen wiper or windshield wiper, is a blade structure installed in front of the windshield. Its function is to remove rain, snow, and dust adhering to the vehicle's windshield, improving driver visibility and enhancing driving safety.
11
4
Share

How to Pass When Encountering a School Bus?

When encountering a school bus, you should slow down and pass or stop and wait. If you need to overtake, change to the far-left lane in advance. Below are relevant introductions about school buses: 1. Driving regulations: When a school bus stops on a road with two or more motor vehicle lanes in the same direction, vehicles behind the school bus and on adjacent lanes should stop and wait, while vehicles on other lanes should slow down and pass. 2. Other motor vehicles: When encountering a school bus stopped by the roadside, observe the reason for the stop, accelerate slowly if allowed, and stop and wait if necessary. 3. Vehicle operation: Traffic authorities will strictly enforce the licensing and management system for school bus drivers, establishing annual inspections, joint supervision, and exit mechanisms. Additionally, school buses and large passenger vehicles that meet the scrapping standard must be dismantled under the supervision of local vehicle management offices to prevent scrapped vehicles from re-entering society and causing traffic safety hazards.
20
1
Share

How to Start a Mercedes-Benz Car?

Close the car door, insert the key, press the brake, and turn the key to start the engine. For Mercedes-Benz cars equipped with a one-button start system, simply carry the car key into the vehicle, ensure the gear is in P position, press the brake pedal, and press the start button to ignite the engine. Do not release the brake pedal at this time; shift to P gear to begin driving. Here is some relevant information about Mercedes-Benz: 1. Introduction: Mercedes-Benz is a German automobile brand, and the company offers models such as the A-Class, B-Class, C-Class, E-Class, S-Class, CLA, CLS, GLA, and GLK. 2. Body Dimensions: The Mercedes-Benz E-Class has a length, width, and height of 5078mm, 1860mm, and 1484mm respectively, with a wheelbase of 3079mm. Both the front and rear suspensions of this car use multi-link independent suspension.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.