···
Log in / Register

Is a 0.3 difference in tire pressure significant?

3 Answers
JudahLee
09/04/25 8:16am
A 0.3 difference in tire pressure is not significant and does not affect driving safety. The recommended tire pressure for cars is between 2.4 and 2.5 bar. As long as all tires are within the normal range, it's acceptable, and it's better if they are closer to each other. There's no issue as long as none of the four tires are below 2.0. Here's some information about tire pressure: Tire pressure is difficult to maintain consistently: In fact, it's not just the front and rear tires that have inconsistent pressure; it's challenging to maintain identical pressure in all four tires of a car. It's important to understand that the standard value for tire pressure is a range, not a fixed number, as it is influenced by many objective factors. Standard tire pressure for cars: The standard tire pressure for a car varies depending on the model. The specific tire pressure should be based on the manufacturer's recommended values.
Was this review help?
1
0
Share
DelVivian
09/17/25 2:17am
A tire pressure difference of 0.3 bar is quite significant. Based on my years of driving experience, I believe this poses safety risks. For instance, when the normal tire pressure is around 2.3 bar, a 0.3 bar difference means one side is too high while the other is too low. This can cause the car to feel unstable during high-speed cornering or emergency braking, leading to longer braking distances and even potential tire blowouts. Uneven pressure on the tire sidewalls accelerates wear, meaning you'll have to replace tires sooner, costing you extra money. Additionally, fuel consumption will increase, and seeing those extra costs at every refuel can be frustrating. I recommend finding a service station immediately or using a personal tire pressure gauge to adjust it. Regular checks are crucial—don’t overlook this for the sake of convenience.
Was this review help?
19
1
Share
Expand All
VanBryce
10/31/25 2:49am
A tire pressure difference of 0.3 bar is quite noticeable in my opinion, especially due to its significant impact on tire wear. If one tire is 0.3 bar lower than the others while the rest are at normal pressure, the uneven force distribution on the tire surface during driving will cause one side to wear faster than the other. This leads to premature tire replacement, which is neither cost-effective nor economical. The handling also suffers – the car feels sluggish when turning, and this becomes more pronounced at high speeds. I've encountered this situation while repairing cars myself; tire pressure differences exceeding 0.2 bar can easily cause issues. Therefore, a 0.3 bar difference should not be ignored. Don't wait until problems arise – it's best to check tire pressure monthly to ensure balance.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

Can a car run without coolant?

It is not advisable to drive a car without coolant. Prolonged driving without coolant will cause the engine temperature to rise continuously, leading to overheating. In severe cases, it can damage the engine. You should pull over, turn off the engine to lower the temperature, and only resume driving after the engine has cooled down. However, driving time should not be too long, and coolant should be replenished promptly. Coolant, also known as antifreeze coolant, is designed to prevent freezing in cold weather, protecting the radiator and engine cylinder block from cracking due to freezing. Antifreeze is not just for winter use; it should be used year-round.
12
2
Share

Can car tires be replaced individually?

Whether car tires can be replaced individually depends on the situation: 1. If it is a new car and has not been driven much, only the problematic tire needs to be replaced, as the wear on tires on the same axle is similar; 2. If the tires have been driven for tens of thousands of kilometers but do not yet need replacement, and only one tire has a problem, replacing just one tire can cause uneven height, leading to bumpiness or steering issues at higher speeds. In this case, it is recommended to replace a pair of tires. Car tires are one of the important components of a vehicle, directly in contact with the road surface, working together with the suspension to absorb shocks during driving, ensuring good ride comfort and smooth driving.
15
1
Share

How Many Kilometers Should a Motorcycle's Full Synthetic Oil Be Changed?

Motorcycle's full synthetic oil should be changed every 3,000 kilometers. If you don't frequently rev the engine to high RPMs, it is recommended to change it every 8,000 kilometers. Engine oil, often referred to as the lifeblood of the engine, plays roles in lubrication, cleaning, sealing, buffering, rust prevention, and heat dissipation within the engine. A motorcycle is a two or three-wheeled vehicle powered by a gasoline engine, steered by handlebars to control the front wheel. It is lightweight, flexible, fast, and widely used for patrols, passenger and cargo transport, as well as sports equipment. Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and tourers.
9
3
Share

What is Idle Speed?

Idle speed refers to an operating condition of a car where the engine runs in neutral gear. Below are the reasons for its occurrence: Various Valve Leaks: When air, gasoline vapor, or combustion exhaust that should not enter the intake manifold does so, it causes the air-fuel mixture to become too rich or too lean, leading to abnormal engine combustion. If the leak affects only individual cylinders, the engine may experience severe shaking, particularly impacting cold idle conditions. Common causes include: loose intake manifold clamps or cracked rubber hoses; intake manifold gasket leaks; damaged intake manifolds or other components causing holes in the intake manifold; leaking O-ring seals on fuel injectors; disconnected or broken vacuum tube connectors; excessive opening of the Positive Crankcase Ventilation (PCV) valve; a constantly open charcoal canister valve; or an Exhaust Gas Recirculation (EGR) valve that does not close properly. Excessive Carbon Buildup in the Throttle Body and Intake Tract: Excessive carbon deposits and dirt in the throttle body and surrounding intake tracts alter the cross-sectional area of the air passage, making it difficult for the control unit to precisely regulate idle air intake. This results in an overly rich or lean air-fuel mixture and abnormal combustion. Common causes include: oil or carbon buildup in the throttle body; oil or carbon deposits in the intake tracts around the throttle body; or oil and carbon buildup in the idle speed stepper motor, duty cycle solenoid valve, or rotary solenoid valve. Idle Air Actuator Malfunction: Faulty idle air actuators lead to inaccurate idle air control. Common causes include: damaged or stuck throttle motor; or damaged or stuck idle speed stepper motor, duty cycle solenoid valve, or rotary solenoid valve.
3
5
Share

What to Do When the Audi Car Has No Power and the Key Cannot Be Pulled Out?

The solutions for when an Audi car has no power and the key cannot be pulled out are: 1. Turn the steering wheel to remove the key; 2. Insert a pen-like object into the small hole next to the key to remove it; 3. Turn off the ignition switch and directly pull out the key when the gear is in the P position. Audi is a luxury car brand under the Volkswagen Group subsidiary Audi AG, with its logo featuring four interlocking rings, representing high technical standards, quality, innovation, and classic car models. Audi's headquarters are located in Ingolstadt, Germany, and it has subsidiaries in many countries, including China.
18
5
Share

What brand is the Mech Dragon car?

Mech Dragon is a medium-sized pure electric sedan under Great Wall Motors, officially launched as the first intelligent electric vehicle at the 19th Guangzhou Auto Show in November 2021. Here is an introduction to Mech Dragon: Interior Configuration: Mech Dragon features Nappa leather seats and Alcantara premium materials, considering comfort and safety as the ultimate luxury standards. It also comes with a super-sensory immersive seat with 16-way seat adjustment, 8-point pneumatic massage therapy, a plasma fresh air health cabin, deep-space-level quiet NVH solutions, and five-star safety protection configurations. Powertrain Configuration: Mech Dragon is the world's first model equipped with 4 LiDARs, achieving 360-degree full-angle LiDAR coverage. Additionally, it boasts the most intelligent sensing components globally, with 38 units. Mech Dragon can comprehensively eliminate surrounding hazards for drivers, enhancing driving safety with the world's first dual MDC intelligent driving computing platform.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.