Is 900 RPM at Idle Normal?

1 Answers
BeckettAnn
07/29/25 5:44pm
Idling at 900 RPM is normal. Here are the specific details about car idling: 1. Normal Range: Around 1500 RPM when the engine is cold, and below 1000 RPM when the engine is warm are considered normal ranges. 2. Idling Indicators: Engine idling performance has a significant impact on emissions, fuel consumption, and comfort. Therefore, engine idling performance is an important indicator for evaluating engine performance. 3. Idling Conditions: During idling, the engine is disconnected from the transmission system and the throttle pedal is fully released. The engine only overcomes its own resistance to operate without any external power output. The engine speed during idling is called the idle speed. The idle speed should not be too high or too low. If it is too high, fuel consumption will increase; if it is too low, the engine idle speed will become unstable.
Was this review help?
20
3
Share
More Forum Discussions

Is the Kailizhi tire under the Pirelli brand?

Kailizhi tire is under the Pirelli brand. Precautions for tire usage are as follows: Tire rotation: Rotate tire positions every 10,000 kilometers to equalize tire fatigue and prevent uneven wear, thereby extending tire lifespan. Tire dynamic balance: Promptly inspect and repair when the vehicle experiences body or steering wheel vibrations during driving. Driving habits: Avoid rapid acceleration, emergency braking, or sharp turns; avoid hitting curbs; avoid parking on curbs; avoid rapid driving on unpaved or uneven roads.
7
0
Share

How to start a MINI Cooper?

MINI Cooper starting procedure: This model features a keyless ignition system and is an automatic transmission vehicle. To start the engine, you need to press the brake pedal and then push the start button. Before starting the engine in an automatic transmission car, you must ensure the gear is in P (Park) position. Regarding dimensions, the MINI Cooper measures 3714mm in length, 1683mm in width, and 1407mm in height, with a wheelbase of 2467mm. Exterior-wise, the vehicle maintains its iconic design with minimal changes, featuring large circular headlights and the distinctive flat roof/short rear deck design that embodies the MINI family's signature style.
7
2
Share

What brand has a logo resembling a crown?

The crown car logo belongs to Toyota's premium brand - the Toyota Crown. Here is some relevant information about Toyota's brands: 1. Toyota has always had two premium brands: The first is Lexus. Previously known as "Lingzhi" in China, it was later renamed Lexus to comply with China's requirement for standardized phonetic translations. 2. Toyota's other premium brand is Crown: The Crown series primarily targets the high-end business segment. From the 133 platform in the 1990s to the latest series today, the Crown brand has decades of history. The rear-wheel-drive luxury sedan platform has consistently been the hallmark design style of the Crown series.
6
3
Share

How to Check Car Mileage?

Methods to check car mileage: The car odometer is generally located directly in front of the driver's position. It typically displays a 6-digit number that can only increase unidirectionally. The number shown represents the total kilometers driven, with the digits before 'km' indicating the total distance traveled. The three zeros at the top indicate that the trip meter has just been reset by pressing the small button on the right, allowing measurement of the distance traveled from the starting point. Nowadays, there are also electronic odometers that obtain mileage signals from speed sensors. The accumulated mileage data in electronic odometers is stored in non-volatile memory, ensuring the data is preserved even when the power is off.
9
0
Share

How are vehicles violating traffic restrictions penalized?

Beijing traffic police strictly regulate that vehicles without a Beijing entry permit are prohibited within the 6th Ring Road, with violators facing a fine and 3 penalty points. According to the "Road Traffic Safety Law," driving outside designated routes or times generally results in a fine and 2 penalty points. Specific penalties are subject to the regulations of each city.
4
2
Share

Will the Malfunction Indicator Light Illuminate if the Charcoal Canister Solenoid Valve Fails?

The malfunction indicator light will illuminate if the charcoal canister solenoid valve fails. The primary function of the charcoal canister is to adsorb and filter fuel vapors from the fuel tank. The solenoid valve controls the entry of these fuel vapors into the engine for combustion, thereby reducing fuel consumption and preventing excessive pressure in the fuel tank. Symptoms of a faulty charcoal canister solenoid valve include: 1. Abnormal noises while driving; 2. Jerking during acceleration and a noticeable gasoline odor inside the vehicle; 3. Irregular idle speed fluctuations after engine startup, accompanied by poor acceleration. In such cases, it is important to check whether the issue is caused by a blockage in the air inlet or filter of the charcoal canister.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.