Is 8L/100km Fuel Consumption Considered High?

1 Answers
AngeloLynn
07/24/25 10:28pm
Fuel consumption is related to the engine displacement of a car. For a 2.0-liter engine, 8L per 100 kilometers is relatively low fuel consumption. For a 1.5-liter or 1.6-liter engine, 8L per 100 kilometers is considered average. A car's fuel consumption depends not only on the vehicle itself but also on the driver's habits and road conditions. More details about car fuel consumption are as follows: 1. Driving Habits: If a driver has a gentle driving style, the car's fuel consumption will be lower. If the driving style is more aggressive, the fuel consumption will be higher. When driving, it's best to press the accelerator lightly and avoid unnecessary overtaking. Look as far ahead as possible to anticipate traffic, allowing you to release the accelerator early and change lanes in advance. 2. Road Conditions: If you frequently drive in congested urban areas, the car's fuel consumption will be higher. If you often drive on smooth elevated roads or highways, the fuel consumption will be lower. In city driving, frequent stops at traffic lights and traffic jams are common. During these stops, although the car's mileage doesn't increase, the engine continues to run, leading to higher fuel consumption per 100 kilometers.
Was this review help?
6
0
Share
More Forum Discussions

Where is the evaporator located in a car?

The evaporator of a car's air conditioning system is located beneath the center console and is a component of the air conditioning system. In addition to the evaporator, there are also some air ducts and other components beneath the center console. The car air conditioning is an essential comfort feature in a vehicle, capable of both cooling and heating. Car air conditioning heating: When the heating function is activated, the high-temperature coolant from the engine passes through the heater core, and the air blown by the blower passes through the heater core, allowing the air vents to blow hot air. Cooling: After pressing the AC button, the compressor clutch engages, and the engine drives the compressor to rotate, enabling the compressor to continuously compress the refrigerant and deliver it to the evaporator. The refrigerant expands and absorbs heat inside the evaporator, cooling the evaporator, which in turn cools the air blown by the blower, allowing the air vents to blow cold air.
11
0
Share

How to Turn on the Cool Air in Qoros Car Air Conditioning?

The method to turn on the cool air in Qoros car air conditioning is: press the AC button and adjust the temperature and airflow accordingly. Models under the Qoros brand include: Qoros 2, Qoros 3, Qoros 5, and Qoros 7. Taking the Qoros 5 as an example, its body dimensions are: length 4600mm, width 1869mm, height 1658mm, with a wheelbase of 2710mm, a fuel tank capacity of 55 liters, and a luggage compartment capacity ranging from 450 to 1500 liters. The Qoros 5 is equipped with a 1.6T turbocharged engine, delivering a maximum horsepower of 197PS, a maximum power of 145kW, and a maximum power speed of 5500rpm, paired with a 7-speed dual-clutch transmission.
19
1
Share

What engine does the Mustang use?

The Mustang is equipped with a 2.3T turbocharged engine and a 5.0L naturally aspirated engine. In terms of power, the Ford Mustang offers two powertrain options: a 2.3T turbocharged engine and a 5.0L naturally aspirated engine. The 2.3T turbocharged engine delivers a maximum power output of 220 kW and a peak torque of 434 Nm, while the 5.0L engine produces a maximum power of 343 kW and a peak torque of 556 Nm. In the transmission system, both engines are paired with a 10-speed automatic transmission. The 2.3T turbocharged engine is a four-cylinder unit featuring direct fuel injection and twin-scroll single turbo technology, which not only enhances the engine's power but also improves its fuel efficiency.
15
3
Share

Should You Use Low Beam or High Beam When Driving on Highways at Night?

When driving on highways at night, use high beams because highway speeds are high and require longer visibility distances. In dark, relatively unoccupied road conditions without streetlights, high beams are the correct method to ensure adequate visibility. Additional relevant information is as follows: 1. The use of lights on highways depends on specific driving conditions. High beams can be used when driving in areas without streetlights to expand the field of vision, but they must be switched to low beams when encountering oncoming vehicles. 2. High beams can be used on highways at night because highways typically have central barriers that block the high beams while eliminating concerns about oncoming traffic posing a danger. Avoid using high beams when driving in urban areas, as cities have better lighting conditions. The high angle of high beams can easily dazzle oncoming drivers and pedestrians, impairing their vision and creating unsafe conditions. Moreover, it is considered an impolite driving behavior.
2
1
Share

What is the steering play in the XPeng P7?

First, it is the cumulative effect of the mechanical clearance between the steering wheels in the entire steering system. Second, manufacturers intentionally create play through the design of the rack and pinion structure, aiming to ensure that minor passive wheel deflection during acceleration does not affect the driver. Steering wheel play: Steering wheel play refers to the free movement (also known as free angle or travel) of the car's steering wheel. It is the angle the steering wheel can turn without causing the steering wheels to deviate. It results from the combined clearance in the entire steering system and the steering wheels. Causes: The main cause is the habitual practice of turning the steering wheel to its limit. It's best to avoid doing this when stationary; wait until the car has slightly started moving before turning. Additionally, regular wheel alignment checks are recommended.
20
2
Share

What is the reason for the constant yellow ABS light on the car's dashboard?

The reason for the constant yellow ABS light on the car's dashboard: This indicates a fault in the ABS system, which requires immediate repair. The ABS system is the Anti-lock Braking System in a car. This system prevents the wheels from locking up during emergency braking. If the wheels lock up during emergency braking, the car may skid uncontrollably, making it impossible for the driver to control the trajectory or slow down, which is very dangerous. The ABS system allows the wheels to maintain a state of rolling and sliding during emergency braking, enabling the driver to slow down the vehicle while still controlling its trajectory. This allows the driver to both decelerate and avoid obstacles. When the ABS system is active, the ABS indicator light on the dashboard will flash. If there is a fault in the ABS system, the ABS indicator light on the dashboard will remain constantly lit.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.