Is 8L/100km Considered High Fuel Consumption?

1 Answers
EmmettRose
07/30/25 2:12am
For a 2.0L displacement engine, a fuel consumption of 8L/100km can be considered low; however, for a 1.5L or 1.6L displacement engine, it would be considered normal and not particularly fuel-efficient. Below are some methods to improve fuel efficiency while driving: 1. Maintain good driving habits: Different driving habits can affect a car's fuel consumption. Frequent rapid acceleration or sudden braking during driving can increase fuel consumption by 5%-10% compared to normal driving. 2. Maintain a steady speed: Most cars achieve optimal fuel efficiency at speeds between 60-80km/h. Keeping a steady speed during driving can help the car reach its best fuel consumption state.
Was this review help?
15
0
Share
More Forum Discussions

Can the Mercedes-Benz C260L be returned due to misfires in cylinders 2 and 3?

If it is a new car and still under warranty, you can request the 4S store to return the car. However, if it is a used car, returning the car is not possible, and only repairs can be performed. The specific costs need to be consulted with the 4S store. Engine cylinder misfire: The meaning of engine cylinder misfire is easy to understand—it means a cylinder is not working. Engine misfires can be simply divided into two situations: one is a complete misfire, meaning no combustion occurs, and the other is a partial misfire, meaning combustion is unstable. Possible causes of engine misfires: Problems with the spark plug, such as blockage or damage; issues with the cylinder wire; problems with the ignition coil.
1
1
Share

How to Perform a U-turn in a Car?

Utilize the right-side intersection to make a U-turn, turn on the right turn signal, slow down and select an appropriate gear, observe the traffic situation on the right, then turn right and proceed appropriately. Turn on the right turn signal, proceed forward through the intersection and stop; shift into reverse gear, turn on the left turn signal, and observe the traffic situation in front and behind using the rearview mirror and by turning your head. Turn on the left turn signal, observe the traffic situation in front and behind as well as the situation inside the left intersection by turning your head, then drive the vehicle into the left intersection and park on the right. Choose a wide section of road with good visibility, slow down and shift into a lower gear, turn on the left turn signal, and observe the traffic situation in front and behind using the interior and exterior rearview mirrors and by turning your head.
15
2
Share

What engine is used in the National IV version of the Neptune?

The National IV version of the Neptune is equipped with the 125-E engine. The 125-E engine technology is based on the previous generation: Although the Neptune has been upgraded to meet the National IV emission standards, its powertrain still relies on the relatively outdated UA platform engine, not the latest ESS high-performance engine. However, despite not being the most advanced in terms of technology, this engine offers decent stability, durability, and performance. 125-E engine specifications: The 125-E engine has an actual displacement of 124ml, a compression ratio of 9.6:1, a maximum power of 6.9KW, and a maximum torque of 9.6N.m. These specifications are not outstanding among models of the same displacement, ranking at an upper-mid level. However, due to its tuning that emphasizes low-end torque, the vehicle demonstrates relatively good climbing ability.
12
5
Share

Do I need to drain the old coolant when replacing it?

If the color is the same, there's no need to drain it; if different, then it should be drained. How to determine coolant: If the original antifreeze and the antifreeze you want to add have different compositions, then it must be drained and cannot be mixed. If the antifreeze hasn't been replaced for more than 3 years, it is recommended to drain it completely before adding new coolant. Coolant replacement interval: Coolant should be replaced every two years or 40,000 kilometers, depending on the actual usage of the vehicle. For commercial vehicles like taxis, which are used frequently and cover more mileage, the coolant needs to be replaced more often. The full name of coolant is antifreeze coolant, which has antifreeze properties. It prevents the coolant from freezing in cold seasons, which could otherwise crack the radiator and damage the engine block.
20
2
Share

Does dismantling the Weile transmission require removing the crossmember?

Whether dismantling the Weile transmission requires removing the crossmember depends on the specific situation. If the transmission needs to be lifted, then the crossmember must be removed. Tools required for transmission dismantling: Prepare the necessary tools and small containers for storing various parts, and carry out the disassembly on a clean and level workbench. If you don't have the vehicle's repair manual, prepare a notebook and adhesive tape for labeling. Disassembly should start from the front oil pump, proceeding from front to back and from outside to inside, while keeping records throughout the process. Avoid striking during transmission dismantling: Most automatic transmission housings are made of cast aluminum. During disassembly, avoid using pry bars or striking directly with metal tools. When removing the hydraulic control valve body, proceed with caution. When separating the upper and lower valve bodies, prevent balls, retaining rings, etc., from falling to the ground, and accurately remember their correct positions.
14
0
Share

How to Transfer Ownership of a Relocated Vehicle When Selling It?

Obtain the tracing card and go to the transfer hall to trace the number, indicating that the vehicle is being relocated; take the vehicle license, registration certificate, tracing slip, invoice or transfer ticket to have the vehicle appraised. Submit the relocation authorization letter, "Motor Vehicle Transfer Application Form", vehicle license, buyer's ID and two copies, and the license plate fee at the window, then receive the receipt. In Beijing, three working days after submitting the license plate (excluding the submission day), go to Shibalidian to collect the large file (for other locations, go to the main vehicle management office). After the vehicle passes the safety inspection, the public security vehicle management department will confiscate the original license plate and vehicle license, and affix the issuing authority's seal.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.