Is 700c Equivalent to 26 or 27?

1 Answers
LilyRose
07/29/25 8:33pm
Road 700C is equivalent to 28 inches, while mountain bikes typically have 26-inch wheel diameters. Mountain bike tires are usually 1.9 inches or wider, whereas road bike tires are around 20 millimeters in width. Generally, 700c wheelsets are more commonly used in European bicycles. In China, road bikes commonly use 700c, whether it's 26-inch, 29er, 700c, or 650B, all of which are suitable for long-distance use. More related information is as follows: Wheel Characteristics: 700c wheels are lightweight and smooth, making them the first choice for paved roads with high riding efficiency. However, they also have certain drawbacks. On rough roads with gradients below 20%, comfort is slightly reduced, and their load-bearing capacity and wheelset strength are slightly inferior to 26-inch wheels. Compatibility with disc brakes is relatively poor, mainly because there are few 700c disc brake frames and limited options for disc brakes specifically designed for 700c. Wheel Specifications: 700C wheels are divided into three types: A, B, and C, all with a measured diameter of approximately 700 millimeters. Class A 700 millimeters measures large rims with small tires, Class B measures medium rims with medium tires, and Class C measures small rims with large tires.
Was this review help?
18
5
Share
More Forum Discussions

What is the fuel consumption of the Envision?

The fuel consumption of the Envision is around 8.6L. Here are the related details: 1. Envision's technology: The Envision adopts a modular design and features advanced technologies such as mid-mounted direct injection, turbocharging, and integrated exhaust manifolds. The S intelligent start-stop 7-speed dual-clutch transmission, equipped with an energy accumulator, easily enables the intelligent start-stop function. 2. Envision's engine: The Envision is equipped with a 2.0L naturally aspirated engine producing 150 horsepower (110KW) and 200NM of torque. Without turbocharging technology, this engine, coded MR20DD, has relatively weak power output. However, technologies like direct injection, variable valve timing for intake and exhaust, combined with a simulated 7-speed CVT, enhance the overall fuel economy of the vehicle. Of course, the lower fuel consumption also benefits from its 1.46-ton body weight.
19
0
Share

Which button is the automatic parking button for the Audi Q5L?

The automatic parking button for the Audi Q5L is located on the door. Below are the related details: 1. Automatic Parking: Automatic parking utilizes onboard sensors (parking radar) and a computer to automatically identify available parking spaces and complete the parking maneuver. During the entire automatic parking process, the driver only needs to follow the prompts to shift gears correctly and control the brakes, without needing to steer. The specific functions and operations of automatic parking may vary among different brands and models. However, overall, as an assistive feature, automatic parking can reduce inconveniences caused by the driver's lack of experience or poor parking visibility. 2. Precautions: The vehicle speed must be kept below 20 KM/H to allow the side sensors to scan and identify the intended parking position.
4
5
Share

What Are the Causes of Overheating in Motorcycle Engines?

Motorcycle engine overheating can be caused by improper running-in of new or overhauled motorcycles, as well as incorrect maintenance and assembly processes, which require professional attention at a 4S shop. Below is a detailed explanation of the causes of motorcycle engine overheating: Improper running-in of new or overhauled motorcycles: For newly purchased or overhauled motorcycles, due to the rough surfaces of parts, geometric deviations in part shapes and assembly positions, the contact area between friction pair parts is relatively small, leading to higher pressure per unit contact area, faster wear rate, and greater heat generation from friction. Incorrect maintenance and assembly processes: Severe wear of the big-end bearing of the engine crankshaft connecting rod or improper installation of the left and right crankshaft bearings can cause the vertical centerline of the crankshaft connecting rod to deviate from the cylinder center after assembly. This results in lateral tilting of the connecting rod, piston misalignment in the cylinder, uneven wear of piston rings and cylinder walls, and reduced cylinder pressure, leading to engine overheating. In four-stroke engines, severe wear of the camshaft cam or insufficient cam height can reduce the lift of the exhaust valve opened by the cam rocker arm, obstructing exhaust and causing insufficient exhaust volume, which also results in engine overheating.
14
4
Share

How to Remove the Volkswagen Cigarette Lighter?

Hand-pull the outer ring to remove it. Here are the relevant instructions: 1. Vertical Removal: The power voltage of the car cigarette lighter is 12 volts, with a separate fuse. When using it, try to pull it out vertically, and avoid shaking it left and right, as this may burn out the fuse or even damage electronic devices. 2. Material: The outer layer of the cigarette lighter is made of iron, and the middle heating wire part is the positive pole. Insert the cigarette lighter and press to lock it for heating. After the heating plate is heated, the spring clip will deform and release the cigarette lighter plug, which pops out. At this point, the temperature is sufficient to light a cigarette.
7
2
Share

How much horsepower does a car generally need to feel the push-back sensation during acceleration?

Acceleration is more about torque than power. Generally, a car with torque reaching 200 Nm will have a noticeable push-back sensation during acceleration. Here is some related information about car power: 1. Engine power: In the automotive field, the engine is the largest power-generating machine. The power of the engine is calculated from torque, and the formula is quite simple: Power (W) = 2π × Torque (Nm) × Speed (rpm) / 60, which can be simplified to: Power (W) = Torque (Nm) × Speed (rpm) / 9.549. 2. Horsepower: The imperial horsepower (hp) is defined as: a horse pulling a 200 lb (lb) object 165 feet (ft) in one minute, multiplied to equal 33,000 lb-ft/min; while the metric horsepower (PS) is defined as a horse pulling a 75 kg object 60 meters in one minute, multiplied to equal 4500 kg.g.m/min.
7
0
Share

What is the minimum ground clearance of the Lavida?

The minimum ground clearance of the Lavida is 110 millimeters. The minimum ground clearance of the Lavida refers to the distance between the lowest point (excluding the wheels) and the supporting surface, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance improves the Lavida's off-road capability, but if the ground clearance is too high, the stability at high speeds may decrease. The Lavida is a car released by Shanghai Volkswagen at the 2012 Beijing Auto Show. This mid-cycle facelift model features significant changes in both exterior and interior design, with the front and rear styling closely resembling the Passat. The dimensions of the Lavida are 4670 mm in length, 1806 mm in width, and 1474 mm in height, with a wheelbase of 2688 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the Lavida's ground clearance is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Lavida's load variations.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.