Is 7.5L per 100km high fuel consumption?

1 Answers
EmmanuelFitz
07/29/25 10:25pm
Under good road conditions without congestion, a fuel consumption of 7.5L per 100km is considered relatively high for small cars with a 1.3L engine, moderate for compact cars with 1.3L to 1.6L engines (within the normal range), and low for mid-size cars or SUVs with 1.6L to 2.0L engines. Factors affecting fuel consumption: 1. Driving habits: Vehicle fuel consumption depends not only on the engine displacement, transmission type, and vehicle size but also on the driver's habits and road conditions. 2. Highway driving: Frequent highway or elevated road driving generally results in lower fuel consumption due to smoother traffic and higher average speeds. 3. Urban roads: Vehicles frequently driven in urban areas: Due to numerous traffic lights and frequent traffic jams with stop-and-go driving, fuel consumption tends to increase.
Was this review help?
14
5
Share
More Forum Discussions

Does Using Third-Party Chargers Affect Tesla?

Tesla may sometimes fail to charge when using third-party chargers. Here is an introduction to relevant Tesla content: 1. Electric Vehicles: Electric vehicles refer to vehicles that use on-board power as their energy source, drive wheels with electric motors, and comply with all road traffic and safety regulations. Due to their relatively smaller environmental impact compared to traditional vehicles, their prospects are widely optimistic, although current technology is not yet mature. 2. Pure Electric Vehicles: Compared to fuel-powered vehicles, the main differences lie in four major components: the drive motor, speed controller, power battery, and on-board charger. Instead of gas stations, they rely on public ultra-fast charging stations. The quality of pure electric vehicles depends on these four components, and their value is also determined by the quality of these parts. The application of pure electric vehicles is directly related to the selection and configuration of these four components.
19
2
Share

What RPM is Most Fuel-Efficient and Least Damaging to the Car?

Engine RPM between 2000 and 3500 is the most fuel-efficient and least damaging to the car. Here are some additional details: 1. Suitable engine RPM range: Engine RPM should not be too high, as high RPM will accelerate engine wear and increase fuel consumption. It's best to keep the engine RPM within an appropriate range—neither too high nor too low. The tachometer on the car dashboard is divided into a white zone and a red zone, with the white zone representing the safe RPM range and the red zone indicating the dangerous RPM range. 2. Fuel-efficient driving tips: The overall weight of the car is directly related to fuel consumption—the heavier the car, the higher the fuel consumption. Reducing the car's weight can help lower fuel consumption. Driving at a constant speed is the most fuel-efficient method; it's best to maintain a steady speed while driving and minimize the number of accelerations and brakes.
18
4
Share

Where is the drainage hole located on the Tiida?

The drainage hole on the Tiida is located inside the vehicle's C or A pillar. Here are some relevant details about the Tiida: 1. Design: The interior seats are mostly dark-colored, spacious, comfortable, soft, and elastic. The areas you can touch inside the Tiida, such as the interior trim, are covered with low-resilience soft materials, providing a comfortable feel to the touch. 2. Configuration: The vehicle is equipped with a comprehensive safety system, including standard features such as ABS anti-lock braking system, EBD electronic brake-force distribution system, BA brake assist system, a rear windshield with wiper, and a high-mounted brake light for enhanced visibility.
10
3
Share

What Does Assembly Repair Refer To?

Assembly repair refers to the repair of engine assemblies, transmission assemblies, chassis, tires, electrical components, and bodywork painting. Below is additional information: 1. Engine assembly repair: This involves major overhauls, maintenance, and component repairs of the engine. 2. Chassis repair: Includes maintenance and repair of truck rear axles, four-wheel maintenance, and steering system repairs. 3. Tire repair: Covers hot and cold patching of various inner and outer tires. 4. Electrical repair: Involves the maintenance and replacement of air conditioning, wiring, lighting, signal systems, electronic control systems, starters, and generators.
3
5
Share

What are the recovery methods for the malfunctioning window lift of the Teana?

Here are the recovery methods for the malfunctioning window lift: 1. Method one: If all window lifters are not working, the possible causes for such a fault may include the grounding wire of the combination switch falling off, the main power wire falling off, poor contact or damage of the relay, or poor contact or failure to close the lock switch. The repair method involves inspecting and repairing the circuit, and addressing any jamming of the window lift. The causes affecting such a fault may include deformation or damage of the glass channel, or loosening of the lifter fixing screws. 2. Method two: If there is a deviation in the guide rail installation position or the window lifter is damaged, the key repair methods involve cleaning or replacing the glass channel, or loosening the glass installation screws to adjust the glass position.
6
5
Share

How to Deal with Engine Not Starting After Overheating and Parking?

At this point, forcing the engine to start should be avoided as it may cause further damage. It's advisable to first open the hood to allow the engine to cool down and then seek towing services. Below are specific solutions for when the engine won't start after overheating and parking: 1. Open the Hood: Opening the hood increases air circulation, helping to lower the temperature. After the temperature drops, slightly loosen the radiator cap to release internal steam before fully opening it. 2. Check the Radiator: Inspect the radiator's connecting pipes for any leaks and ensure the coolant level is adequate. If no coolant is available, mineral water can be used as a temporary substitute, but it's crucial to replace it with proper coolant later. Avoid adding coolant immediately if the radiator is excessively hot.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.