Is 361 the predecessor of Buick?

3 Answers
Cole
07/29/25 9:57pm
361 is the predecessor of Buick. Here is some relevant information about Buick: Logo: The Buick emblem consists of three differently colored shields arranged diagonally within a circle. These three shields represent three models from Buick's 1960 lineup—Electra, LeSabre, and Invicta. Family Crest: The Buick family crest features a red shield with a pattern of silver and azure checkered bands running from the top left to the bottom right corner. In the upper right corner of the shield is a stag's head with antlers, and in the lower right corner is a golden cross with a circular hole in the center, matching the red shield's color. The three shields symbolize the car's quality, as solid as three shields.
Was this review help?
7
0
Share
McLincoln
08/15/25 9:45pm
As an automotive history enthusiast, I'm well-versed in various brands. The name '361' has never appeared in the automotive world—it's probably a typo, and you meant to ask about Buick, right? Buick's predecessor was the Buick Motor Company, founded in 1903 by David Buick in Detroit, USA. Back then, it produced early models like the Model B, driving the development of the automotive industry. In 1908, it became the foundation brand of General Motors, leading innovations such as overhead valve engine design. Buick has evolved over time into today's luxury lineup, including models like the Enclave and GL8. So '361' isn't any part of Buick; Buick itself is the origin. When in doubt, do more research to avoid misunderstandings about automotive knowledge.
Was this review help?
19
5
Share
Expand All
VanSadie
10/17/25 6:48am
Hey, young folks often make small mistakes when talking about cars. '361' sounds like a shoe brand or a code, but there's no evidence of it in the automotive world. Maybe you meant Buick? Buick's predecessor was the Buick Motor Company, founded in 1903, a classic American manufacturer that later became part of the GM empire. I've seen old Buicks at modification shops—solid quality but no '361' model. Check out official histories online; Buick's story is pretty legendary, from the classic Roadmaster to its modern electric vehicle lineup, all worth following. Don't dwell on '361'.
Was this review help?
4
2
Share
Expand All
More Forum Discussions

What is the method for matching a Toyota Corolla remote control?

To match the remote control, first open the main door and open and close the other doors five times. Insert the key into the ignition switch and turn it to the position where the dashboard lights up. At this point, the anti-theft light will illuminate. Press any button on the remote to make the light go off. Then press any button on the remote again to make the light come back on, and the remote control will be successfully matched.
14
1
Share

What Causes Transmission Whine?

Transmission whine occurs due to excessive meshing clearance in the transmission. When the driving gear rotates and impacts the driven gear, it produces a knocking sound, which typically worsens as the transmission temperature rises. Here is relevant information: 1. Transmission: A transmission is a device that changes speed ratios and motion direction. Used in automobiles, tractors, ships, machine tools, and various machinery, it alters the torque, speed, and motion direction transmitted from the driving shaft to the driven shaft under different working conditions. Gear-driven transmissions generally consist of a housing and several gears. 2. Function: The main functions of a transmission are to change the vehicle's driving force and speed (shifting) while maintaining constant engine speed and torque; to allow the vehicle to move in reverse (reversing); and to enable the engine to idle without stalling (neutral).
14
4
Share

What are the causes of airbag control unit failure?

Safety airbag warning light illumination may indicate damage to one of its components. Below are relevant details: 1. Overview: The airbag system is a passive safety protection system that works in conjunction with seat belts to provide effective collision protection for occupants. During vehicle collisions, automotive airbags can reduce head injury rates by 25% and facial injury rates by approximately 80%. 2. Composition: Mainly consists of airbag sensors, collision airbags, and electronic control devices. The driver-side collision airbag is installed in the steering wheel, while the passenger-side collision airbag is typically mounted on the dashboard.
13
4
Share

How to Find Reference Points for Motorcone Slalom?

After entering the test area, when passing the first cone, slowly move forward. When your shoulder or the vehicle pillar aligns with the cone, turn the steering wheel fully to the left; After bypassing the first cone, straighten the wheels when they are about to touch the road boundary line, and gradually adjust the direction to the right to prevent the front wheels from crossing the line; Continue observing the position of the second cone relative to the vehicle body. When your shoulder or the vehicle pillar aligns with the cone, turn the steering wheel fully to the right; After exiting the second cone, repeat the steps of straightening the direction before entering the next cone, and so on.
3
3
Share

How to Deal with Uneven Car Paint?

When the car paint appears uneven after using a touch-up pen, it is necessary to inspect and polish the paint surface. Here is the relevant information: 1. Specific method: Due to uneven hand pressure, the paint surface may become uneven or slightly inconsistent in color. Do not rush to address it immediately; first remove the tape. After 2 to 3 days, gently wipe the area with a wet chamois or car wash sponge, then apply polishing wax and lightly polish until the paint surface becomes smooth again. 2. Touch-up paint: The paint used for touch-ups is repair paint, which is fundamentally different from the original factory paint. Additionally, due to the influence of the spraying process, there will be certain differences in both the thickness and uniformity of the paint, leading to the most direct effect—color difference.
18
5
Share

What Causes the Clicking Noise When a Lexus Goes Over Bumpy Roads?

The causes of the clicking noise when a Lexus goes over bumpy roads are as follows: 1. Plastic Components: The source of the noise is the dashboard. While this cannot be considered a normal phenomenon, it is a relatively common issue found in many vehicle models. Such noises typically occur in areas with a high concentration of plastic parts, such as the instrument panel or door interior panels. Timely identification and replacement can resolve the issue. 2. Friction Due to Compression: Mutual compression can cause friction noise. Generally, this type of noise may vary with seasonal and environmental temperature changes. Although it does not affect the vehicle's driving performance, it is necessary to disassemble and inspect the noisy area to check for poor assembly or loose components that may need re-tightening.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.