Is 13 Volts Normal for Car Power Generation?

1 Answers
JaxsonLee
07/30/25 8:19am
This is the battery voltage, not the generator's power output. 13V is still considered normal. The reason for high voltage in a car generator is usually a malfunctioning voltage regulator. It is necessary to inspect the generator's regulator and replace it according to the generator model. If the generator's voltage regulator fails, causing loss of control or abnormal voltage detection circuitry, the generator may produce excessively high voltage. Engine voltage malfunction: When the generator's voltage regulator fails, the generator produces excessively high voltage, which increases with higher RPM. If the voltage is not extremely high, it may cause the generator to overheat, battery overheating, bulb burnout, or charging circuit damage. In severe cases, it can lead to battery swelling, explosion, or complete failure, charging circuit fires, or even ECU damage.
Was this review help?
13
1
Share
More Forum Discussions

Differences Between A25C and A25A Engines?

The Camry 2.5L engine comes in two models: A25A or A25C. The A25A and A25C have consistent performance and parameters, with no significant performance differences. The main distinctions are as follows: 1. Version Differences: The A25A represents Toyota's TNGA 2.5L engine, which is imported directly from Japan. The A25C engine, on the other hand, is the domestically produced version. 2. Assembly Differences: The A25A is imported as a complete engine assembly from Japan, fully assembled there before shipping. The A25C involves importing all necessary engine components from Japan, which are then assembled at the GAC Group factory. 3. Performance of A25A or A25C: Both the A25A and A25C engines feature new technology that allows free switching between the Otto cycle and Atkinson cycle systems, achieving a compression ratio of (13:1) for this internal combustion engine. In terms of new technology and power, the 2.5L engine delivers robust performance with 205 horsepower generated from 151KW, 240nM of torque, and powerful dynamics. The 4-2-1 exhaust manifold arrangement elevates exhaust separation to a new level.
9
0
Share

When will the Chevrolet Cruze 4-cylinder be launched?

The Chevrolet Cruze 4-cylinder has already been launched in April 2020. This four-cylinder engine is a 1.5-liter 113 horsepower naturally aspirated engine, paired with a six-speed automatic transmission. Below is relevant information about the 2020 Cruze: 1. Overall design. The Cruze features a compact and dynamic body, with an exaggerated front grille design and sharp headlights. Additionally, its staggered waistline is distinctive, enhancing the sporty feel and sense of power. The interior is largely consistent with the 2019 model, with only some differences in configuration. The family-style wraparound cockpit provides a sense of security. 2. Configuration models. The 2020 Cruze offers two configuration models. The Automatic Enjoyment Edition comes with front and side airbags, tire pressure display, ESP body stability system, four-wheel disc brakes, 16-inch alloy wheels, rearview camera, cruise control, hill start assist, remote start, leather multifunction steering wheel, 3.5-inch LCD instrument panel, 8-inch central control screen, GPS navigation, road rescue call, smartphone connectivity and projection, voice recognition control, car networking, full LED headlights, and LED daytime running lights. The Automatic Delight Edition adds features like rear parking radar and an electric sunroof.
8
2
Share

What maintenance items are needed at 100,000 kilometers?

After driving 100,000 kilometers, it is necessary to clean the carbon deposits in the engine, replace the spark plugs, belts, engine oil, coolant, transmission fluid, brake fluid, power steering fluid, etc. The maintenance items for a car at 100,000 kilometers are relatively extensive, mainly involving the replacement of wear-prone parts and fluids. Here are the relevant details: 1. Brake Disc Replacement: Wear-prone parts on a car include belts, spark plugs, ignition coils, brake pads, brake discs, wipers, various filters, and tires. The fluids in a car include brake fluid, engine oil, coolant, transmission fluid, and power steering fluid. After driving 100,000 kilometers, the brake discs need to be replaced. If the remaining thickness of the brake pads is insufficient, they should also be replaced. 2. Tire Replacement: If the tires have never been replaced, they should be changed as well. Tires are rubber products and will age over time. It is recommended to replace tires every four years, even if the mileage is low during that period. 3. Transmission Fluid Replacement: When replacing the transmission fluid, use the circulation machine method and purchase original transmission fluid. Brake fluid is highly prone to absorbing moisture. If the brake fluid has a high water content, it can lead to reduced braking force and longer stopping distances.
16
0
Share

Can ETC cards in cars be stolen and swiped?

If the ETC card inserted is a regular bank card with ETC functionality, there is a possibility of unauthorized swiping. 1. Currently, there are three types of ETC cards: The first type is the single-purpose ETC card issued earlier by the transportation industry, which has ceased to be issued. The second type is a debit card jointly issued by the transportation industry and banks, where customers hold a single-purpose ETC card and a bank card. The third type is a co-branded card jointly issued by the transportation industry and banks, integrating ETC functionality into a regular bank card. 2. The first two types of cards do not pose any risk of unauthorized swiping. Only the third type of card, if it has UnionPay's "QuickPass" feature and has enabled the "No Password" and "No Signature" services, carries the risk of unauthorized swiping. However, simply notifying the issuing bank to disable the "No Password and No Signature" feature can prevent further unauthorized swiping. 3. In response to incidents of unauthorized swiping in some areas, the Ministry of Transport issued a notice urging ETC issuing service agencies and partner banks to immediately stop issuing "two-in-one" co-branded cards. If users genuinely require such cards, the "QuickPass" and "Small Amount No Signature No Password" services should be disabled by default upon issuance.
9
4
Share

What are the requirements for BYD vehicle replacement?

BYD vehicle replacement requires the following conditions: 1. Complete replacement procedures; 2. The mileage has not reached the scrapping limit; 3. The exhaust emissions must meet standards; 4. The vehicle must not have any violations or modifications. BYD models include: BYD Yuan, BYD Song, BYD Tang, BYD Qin EV300, BYD Qin, BYD S7, BYD S6, etc. Taking the BYD Song 2021 Classic Edition Manual Comfort as an example, its body dimensions are: length 4600 mm, width 1830 mm, height 1700 mm, wheelbase 2660 mm, and fuel tank capacity 60 liters.
4
3
Share

What is the method for replacing an oil filter?

The method for replacing an oil filter is as follows: 1. Remove the drain plug to drain the engine oil; 2. Clean the drain plug and tighten it; 3. Use an oil filter wrench to loosen and remove the oil filter; 4. Apply engine oil to the O-ring of the new oil filter; 5. Screw on the new oil filter. Precautions for replacing the oil filter include: 1. Use an oil filter wrench or appropriate tools when removing the oil filter to prevent damaging the threads of the connecting part; 2. The oil and oil filter should be replaced simultaneously to help extend the engine's service life; 3. Do not overtighten the filter to avoid damaging the sealing gasket.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.