Is 13 liters per 100 kilometers considered high fuel consumption?

1 Answers
FranciscoRose
07/30/25 2:02am
13 liters per 100 kilometers means the fuel consumption is 13L/100km. Whether this is considered high depends on the vehicle type. For smaller sedans with engine displacements around 1.6-2.0L, it is relatively high, while for larger vehicles with bigger engines like SUVs, it is normal. Here are some additional tips: 1. Maintain a steady speed: Control your speed while driving and avoid sudden braking. Also, avoid opening windows at high speeds as it increases fuel consumption. 2. Regularly check tire pressure: Ensure your tires are properly inflated, as both underinflation and overinflation can increase fuel consumption. Additionally, maintain your transmission: Always use the correct transmission fluid for your vehicle, as it not only lubricates but also helps in torque transmission, so regular replacement is necessary.
Was this review help?
10
1
Share
More Forum Discussions

What are the methods of installment car purchase?

Methods of installment car purchase are as follows: 1. 4S Store: Nowadays, many 4S stores can assist in handling car loans. By paying a certain service fee, you can easily obtain a loan. The threshold for auto financial loans is very low, requiring only a stable income source and repayment ability. You can choose your preferred car brand and inquire about specific installment loan options at the 4S store, selecting a suitable term based on your needs. 2. Credit Card: If your credit card limit is very high or the car loan amount is not substantial, using a credit card is also a good option. The down payment is generally between 30%-40% of the total car price, which is higher than other loan methods. The installment repayment period is limited, usually not exceeding 5 years, with annual interest rates determined by the car price. 3. Bank Loan: Many banks offer car loan services, and some models in collaboration with manufacturers may have special offers. If you plan to buy a car, it is advisable to check the official websites of major banks. Compared to the above two car loan methods, bank loans have lower interest rates, but the approval process is longer, and the procedures are more cumbersome. If your personal credit is poor or your income is unstable, you may also face rejection.
11
3
Share

What are the advantages and disadvantages of applying a car paint protection film?

Car paint protection film has the following advantages and disadvantages: 1. Advantages of applying a car paint protection film: (1) The film perfectly protects the paint surface, eliminating the need to spend money on dealing with car scratches, especially for high-end cars, which can save a significant amount of money. (2) Vehicles with a paint protection film not only avoid spending money on scratches but also prevent the hassle of paint damage, oxidation, and other hazards during vehicle use. (3) Maintaining the appearance of the paint surface. Cars without a protection film will inevitably have color differences when repainted later, and the longer the time, the greater the color difference, significantly affecting the vehicle's aesthetics. With a protection film, there is no such worry. 2. Disadvantages of applying a car paint protection film: (1) As a cosmetic product for the car paint, once the film is damaged in a collision, it cannot be used and needs to be replaced, requiring the owner to pay for the replacement, which can be quite costly. (2) Car paint consists of three parts: primer, intermediate coat, and topcoat. While car paint is non-flammable, most paint protection films can be ignited. If fireworks accidentally come into contact with the car, it can easily cause the car to catch fire. (3) Car paint protection films are expensive, with a set costing over 5000. Moreover, the invisible film is a consumable with a service life of about three years. If it needs to be replaced due to surface wear, the cost is even higher.
9
4
Share

What is the Difference Between Gross Vehicle Mass and Curb Weight?

Gross vehicle mass refers to the total weight of a vehicle when it is fully equipped and loaded with passengers (including the driver) or cargo as per regulations. Curb weight refers to the dry weight of the vehicle plus the weight of coolant, fuel (at least 90% of the tank capacity), spare wheel, and other onboard accessories. What is the difference between curb weight and gross vehicle mass? The specific descriptions are as follows: 1. Scope difference: Gross vehicle mass = curb weight + driver and passenger weight + luggage weight. The scope of gross vehicle mass is larger. 2. Meaning difference: The curb weight of a vehicle is closely related to its design level, manufacturing level, and industrialization level. On the other hand, gross vehicle mass simply represents the sum of various weights without any additional meaning.
10
2
Share

What is the function of rain guards? Is it necessary to install them?

Rain guards can effectively prevent rainwater or strong wind from directly blowing into the car, improving ventilation efficiency; when driving in the rain, opening the window can also prevent the window from fogging up. It is necessary to install them in rainy areas. The following is a related introduction: 1. The function of rain guards: In any environmental condition, they can maintain the convection of fresh air, ensuring that the air inside the car is suitable for human needs; since they maintain the convection of fresh air, they will not cause glass fogging under any circumstances, which affects visibility and operation, thereby increasing driving safety; 2. The quality of rain guards: The quality of rain guards mainly depends on two aspects. One is the material of the rain guards, some are made of plastic, and some are made of synthetic resin. Resin has higher quality in terms of thickness and flexibility. The other is the adhesive of the rain guards. Some domestic adhesives may not stick firmly or tightly, and rainwater may flow down along the gap during heavy rain. As for the wind noise issue, there is actually little difference before and after installation.
10
1
Share

What to Do When Volkswagen Remote Key Doesn't Work?

Volkswagen remote key malfunction may be caused by insufficient battery power. Owners can choose to replace the battery to restore the remote key function. Below are extended maintenance tips for remote keys: 1. Avoid frequently placing the key with metal objects: Many car owners prefer to keep smart keys together with other keys or metal items on a keychain, which is actually a bad habit. During contact, the smart key may get covered by metal objects. 2. Never leave spare keys in the car: Losing a smart key inevitably brings inconvenience and trouble. Sometimes when urgently needing to use the car or handle affairs, reconfiguring the key also incurs high costs. It's best to keep spare keys at home for emergency use. 3. Prevent smart keys from falling or being impacted: Most smart keys nowadays have internal circuits with weak impact resistance. They are easily damaged by severe collisions or drops, affecting the key's lifespan and potentially causing direct damage.
14
1
Share

Can vehicles without ETC still access highways now?

Vehicles without ETC can still use manual lanes to enter highways. According to State Council regulations, starting from 2020, vehicles without ETC will not enjoy toll discounts. In the future, only one manual lane will remain at highway toll stations, requiring payment through manual channels. Additionally, newly installed ETC devices cannot be used immediately on highways—they must first be activated. During holiday free-toll periods, vehicles can still access highways. For users with activated ETC, passing through ETC lanes during these periods will not incur charges. ETC deduction principles: Highways feature one or multiple ETC lanes. Using dedicated short-range microwave communication between the vehicle's windshield-mounted electronic tag and the toll station's microwave antenna, the system performs backend settlement with banks through computer networking technology. This achieves non-stop toll payment at highway and bridge checkpoints, operating on a "pass first, deduct later" principle. Benefits of installing ETC: Time-saving: Eliminates queuing wait times; Eco-friendly: Supports green, low-carbon travel by reducing noise and exhaust emissions through non-stop toll collection; Cost-efficient: Saves fuel and reduces vehicle wear by minimizing frequent starts and stops; Improved efficiency: ETC lanes theoretically increase throughput by 2-3 times, making traditional ETC systems faster and more technologically advanced. Compared to license plate payment, ETC technology is more mature and advantageous. Policy support: The State Council's "13th Five-Year Plan for Modern Comprehensive Transportation System Development" explicitly states goals to "achieve intercity transportation card interoperability in key city clusters by 2020" and "significantly increase ETC adoption rates," with specific targets including "50% ETC usage rate for passenger vehicles by 2020" in major transportation development indicators. Future potential: Beyond improving ETC installation convenience and passenger vehicle adoption rates, future initiatives will promote ETC use for trucks and explore deeper integration with smart transportation systems like vehicle-to-vehicle communication and vehicle-road coordination. This will provide comprehensive travel services for vehicle owners, indicating broader application scenarios for ETC technology.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.