Is 12 liters per 100 kilometers considered high fuel consumption?

2 Answers
VanKarter
07/24/25 7:13am
1.6L engine consuming 12 liters per 100 kilometers is not considered high if driving only in congested urban areas. Here are some related introductions about fuel consumption: 1. Driving habits and road conditions: Fuel consumption is greatly influenced by driving habits and road conditions. Avoid hard acceleration; gradual acceleration when starting is the most fuel-efficient. To save fuel, avoid heavy throttle when starting, as heavy throttle can increase fuel consumption by 2 to 3 times compared to normal acceleration. 2. Braking: Maintaining distance and avoiding frequent braking saves more fuel. If you don't maintain distance, you may need to brake frequently on the road. When braking, an automatic transmission vehicle will downshift, requiring the engine to pull back up from lower gears. Starting from a stop or in lower gears requires the engine to consume more fuel.
Was this review help?
14
0
Share
JuniperLee
08/11/25 2:57am
As an experienced car owner, 12 liters per 100 kilometers is indeed considered high fuel consumption. Generally, compact cars like sedans average around 7-8 liters, while SUVs may range from 10-15 liters which is normal. If you're driving a regular family car, 12 liters means significantly higher expenses, especially with current fuel prices adding hundreds more to monthly costs. I remember my old car had similar consumption initially, later finding low tire pressure and constant AC usage were the culprits. I recommend visiting a repair shop for checks—like inspecting the air filter or adjusting driving habits (avoid aggressive acceleration) to save substantially. Long-term, switching to a fuel-efficient or hybrid model would be more economical, easing both your wallet and environmental impact. The key is not to ignore it—high fuel consumption increases overall ownership costs, so addressing it early ensures worry-free driving.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

Is it okay not to apply film on the rear windshield?

It is acceptable not to apply film on the rear windshield. Here is more information about windshields: 1. The windshield was an innovative idea by Ford, which involved sandwiching two pieces of glass together with a layer of PVC plastic in between, creating a laminated glass structure. 2. The front windshield of a car is primarily made of laminated tempered glass or zoned tempered glass, capable of withstanding strong impacts. 3. Proper use of windshield washer fluid is essential during maintenance. When the windshield surface appears blurry, cleaning it with appropriate washer fluid can significantly improve clarity. If you notice issues with glare or reflections at night, wiping the windshield with washer fluid can help. Additionally, when driving on highways or in dusty conditions, washer fluid is consumed quickly, so it's important to refill it promptly.
7
3
Share

What is the Throttle Body Matching Method for Zotye?

There are three common methods for throttle body matching: manual matching, power-off matching, and diagnostic tool matching. Generally, matching and resetting are required after replacing a new throttle body or after disassembly and cleaning. The matching process is essentially the computer's self-learning phase, where it re-recognizes the throttle body's position and angle. The specific methods are as follows: 1. Manual Matching Method: For mechanically cable-operated throttle bodies, manual reset is used. By turning the ignition switch on and off several times in succession, the vehicle's computer will delete the original throttle memory and store new throttle data. To verify success, start the vehicle and check for normal operation. 2. Power-off Matching Method: After replacing the throttle body, disconnect the negative terminal of the battery for a few minutes to allow the vehicle to enter a dormant state. During this process, the vehicle computer's original memory is restored to factory settings. This method is only suitable for lower-end models. Start the vehicle and test for normal operation to confirm success. 3. Diagnostic Tool Matching Method: Use a specialized diagnostic tool to read data, then follow the prompts to reset adaptive values to zero, clear fault codes, start the vehicle, and check for normal operation to confirm successful matching.
11
2
Share

How to Replace the Battery in a Zotye Car Key?

Zotye car key battery replacement method is as follows: 1. Before replacing the key battery, you need to open the key first. You can use a mechanical key or a screwdriver to open it. The cover plate of the car key is fixed, and you only need to pry the buckle loose. After opening the key, you will find a circuit board, and the battery can be seen on the motherboard. 2. There are several specifications of batteries used in car keys, namely CR2302, CR2450, CR1616, CR2025, CR1620, etc. The battery model is usually printed on the back of the battery. 3. The replacement battery model must be the same as the one used in the original car key. When replacing the battery, you need to place the battery into the car remote key in the opposite direction of removal. During installation, you need to distinguish the positive and negative poles of the battery. 4. After replacing the battery, align the back cover with the car remote key, place it from the top, and press down slightly until you hear the sound of the buckle aligning. 5. If the car key runs out of power, the safest method is to go to a car repair shop or a 4S store to have it replaced by professional maintenance personnel to avoid damaging the key motherboard during the replacement process, which could affect normal use.
7
3
Share

How to Determine if the Ignition Coil is Faulty?

Methods to determine if the ignition coil is damaged are as follows: 1. The vehicle body shakes noticeably when the car is idling. 2. The exhaust airflow from the vehicle shows obvious intermittency; at the same time, the exhaust pipe shakes violently, and a distinct "popping" sound can be clearly heard. Below is more information about the ignition coil: 1. The core components of the ignition system are the ignition coil and the switching device. Increasing the energy of the ignition coil allows the spark plug to produce a spark with sufficient energy, which is a basic requirement for the ignition system to adapt to the operation of modern engines. 2. A typical ignition coil contains two sets of coils: the primary coil and the secondary coil. The primary coil uses thicker enameled wire, usually around 0.5-1 mm in diameter, wound approximately 200-500 turns; the secondary coil uses finer enameled wire, typically around 0.1 mm in diameter, wound approximately 15,000-25,000 turns.
2
0
Share

Which Light Turns On When the Turn Signal Switch Is Lifted Up?

When the turn signal switch is lifted up, the right turn signal will light up. Here is more information about vehicle turn signals: 1. Turn signals are important indicator lights that activate when a motor vehicle is turning to alert surrounding vehicles and pedestrians. Turn signals can be mainly categorized into three types: resistance wire type, capacitor type, and electronic type. The resistance wire type can be further divided into thermal wire (or electrothermal) type and wing (or snap-action) type, while the electronic type can be subdivided into hybrid (relay with contacts and electronic components) and fully electronic (no relay). 2. Failing to use turn signals when turning will result in a fine of 200 yuan and a deduction of 3 points.
2
2
Share

Can Modified Rims Be Registered?

Modified rims can be registered. More knowledge about modified rims is as follows: 1. Rim modification refers to the alteration of the original vehicle rims by the owner or professional vehicle modifiers for aesthetic or other purposes. As an important part of the car, rims and tires are a popular modification category among car enthusiasts. Rim modification has increasingly become a focal point for car fans. 2. Each rim has a center hole, but the diameter of the center hole varies among different rims. The center bore diameter indicates the size of the rim's center hole. If the center bore diameter of the modified rim differs from the original vehicle's specifications during modification, it can be installed using a hub-centric ring. However, due to the additional adapter, the ability to handle bumpy road conditions during actual driving may be reduced accordingly.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.