Is 10L/100km High for an Automatic Transmission?

2 Answers
GideonMarie
07/29/25 8:05am
For a regular family sedan, 10L/100km is not considered high. Generally, a fuel consumption of 7-12L/100km is normal for most family cars. Below are factors affecting fuel consumption and methods to reduce it: Factors affecting fuel consumption: The driver's habits, road conditions, the weight of items placed in the car, whether the air conditioning is on, and whether the vehicle is in the break-in period—all these factors can influence the car's fuel consumption. Methods to reduce fuel consumption: Avoid prolonged idling or driving at low speeds; avoid overloading the vehicle and keeping the fuel tank full; avoid using high-viscosity engine oil; try to control speed using the accelerator rather than the brake.
Was this review help?
13
4
Share
McFinley
08/12/25 11:18am
I drive an automatic transmission car for my daily commute, and in city traffic, the fuel consumption is often around 10 liters. This varies by vehicle type. For example, small sedans typically average 8-9 liters, so 10 liters is slightly high; for mid-size SUVs or older cars, 10 liters isn't considered excessive. Many factors influence this, such as congested roads, excessive AC usage, or aggressive driving habits like rapid acceleration, which can increase fuel consumption. From my experience, regularly checking tire pressure is crucial—underinflated tires consume more fuel, and cleaning the air filter can also improve efficiency. If fuel consumption remains at 10 liters even during highway cruising, it's worth checking the engine or transmission for issues. To save fuel, adjust your driving habits: ease on the accelerator, brake less, and maintain a steady speed. While 10 liters isn't alarmingly high, optimizing these factors can save a significant amount on fuel costs each month.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

How Often Should Used Cars Undergo Inspection?

Vehicle inspections should be calculated from the date of initial registration, with specific requirements as follows: 1. Passenger vehicles for commercial use: Within the first 5 years, inspect once annually; after exceeding 5 years, inspect every 6 months. 2. Trucks and large/medium-sized non-commercial passenger vehicles: Within the first 10 years, inspect once annually; after exceeding 10 years, inspect every 6 months. 3. Small and mini non-commercial passenger vehicles: Within the first 6 years, inspect once every 2 years; after exceeding 6 years, inspect once annually; after exceeding 15 years, inspect every 6 months.
16
0
Share

What does the low engine oil indicator look like?

The low engine oil warning light: Its shape resembles a teapot with a drop of liquid dripping down. When the engine oil replenishment indicator lights up, you should immediately take your car to a 4S shop for inspection and should not continue driving. Otherwise, it will accelerate engine wear and may cause irreversible damage to the engine itself. Here are some related details: 1. Engine oil filling standard: Engine oil should generally be filled to slightly above the middle point between the minimum and maximum marks on the dipstick, never exceeding the maximum or falling below the minimum mark. Exceeding the maximum mark will increase the rotational resistance of the engine crankshaft and affect performance, while falling below the minimum mark will prevent adequate lubrication protection for internal engine components. 2. Engine oil replacement cycle: Different manufacturers have varying requirements for oil change intervals. Generally, engine oil should be checked and replaced at a 4S shop every 5,000 kilometers/6 months. If you use fully synthetic oil, it can be replaced every 8,000 kilometers.
4
1
Share

Does the BMW M series have a station wagon?

BMW's M series does not have a station wagon. Here is more information about the BMW M series: 1. Design philosophy: High performance with racing characteristics. 2. Maintenance knowledge: The 2013 BMW M6 has a whole vehicle warranty of two years with unlimited mileage, and the maintenance cycle is as follows: first maintenance at 10,000 kilometers or 6 months. Second maintenance at 20,000 kilometers or 12 months. Maintenance interval: 10,000 kilometers or 6 months. It is recommended to perform a major maintenance after the vehicle has traveled 60,000 kilometers, which includes replacing the engine oil, oil filter, air filter, cabin air filter, fuel filter, brake fluid, and transmission oil.
3
4
Share

Is the Environmental Protection Label Still Required?

Environmental protection labels are no longer required. Below is a partial introduction to emission standards: 1. Definition: These are national regulations that set limits on the concentration or total amount of pollutants discharged into the environment by artificial pollution sources. General pollutant emission standards specify the allowable discharge amounts for various pollutants that are widespread or particularly harmful within a certain area (nationwide or regional), applicable to all industries. Some general emission standards specify allowable discharge amounts based on different discharge directions (e.g., water pollutants discharged into sewers, rivers, lakes, or seas). 2. Overview: Emission standards refer to the harmful gases discharged from vehicle exhaust, including carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, soot, etc. 3. Reason: On July 25, 2016, the Ministry of Environmental Protection, the Ministry of Public Security, and the National Certification and Accreditation Administration jointly issued the "Notice on Further Standardizing Emission Inspections and Strengthening Environmental Supervision and Management of Motor Vehicles" (National Environmental Regulation Atmosphere [2016] No. 2), which clearly states that "environmental protection departments will no longer issue motor vehicle environmental protection inspection compliance labels."
9
1
Share

What principle does the engine adopt?

Engine working principle is the conversion of internal energy into mechanical energy. Here are the related introductions: 1. The meaning of engine: Engine (Engine) is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, internal combustion engines usually convert chemical energy into mechanical energy. 2. The meaning of external combustion engine: That is to say, its fuel burns outside the engine, and the engine converts the heat energy generated by this combustion into kinetic energy. 3. The meaning of internal combustion engine: Internal combustion engine, also known as reciprocating piston engine, differs from external combustion engines in that its fuel burns inside it. There are many types of internal combustion engines, with common gasoline engines and diesel engines being typical examples.
19
3
Share

Where is the car air conditioning condenser located?

In front of the engine, right behind the front grille where the wind hits (except for rear-engine vehicles). The car air conditioning condenser is typically installed at the very front of the vehicle to utilize the incoming wind while driving to cool the refrigerant in the pipelines. Here is some related information: 1. Meaning of the condenser: The condenser, also known as the outdoor heat exchanger, is the high-pressure component in the system during cooling (or the low-pressure component in heating mode for heat pump types). It is located between the compressor discharge port and the throttling device (capillary tube or electronic expansion valve). It receives the high-temperature, high-pressure gas (Freon) discharged from the air conditioning compressor. 2. Operation of the condenser: The refrigerant enters the condenser, where it is cooled through copper tubes and aluminum fins. The air conditioner is equipped with an axial-flow cooling fan, using air cooling to ensure the refrigerant condenses while maintaining constant pressure, lowering the temperature, and transforming from gas to liquid. The process of refrigerant change in the condenser can theoretically be considered an isothermal process. 3. Functions of the condenser: (1) The air removes the superheated portion of the high-temperature refrigerant gas delivered by the compressor, turning it into dry saturated vapor. (2) It liquefies the refrigerant while maintaining a constant saturation temperature. (3) When the air temperature is lower than the condensation temperature, it further cools the liquefied refrigerant to match the surrounding air temperature, serving a cooling function.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.