Is 0W20 Engine Oil Mandatory for the New Magotan?

2 Answers
RiverFitz
07/29/25 3:53am
0W20 engine oil has too low viscosity for the Magotan's engine, so it is not suitable for the Magotan. Engine oil is referred to as the lifeblood of the engine. Without engine oil, the engine cannot operate normally. Engine oil not only lubricates but also cleans, seals, cushions, prevents rust, and dissipates heat within the engine. More relevant information is as follows: 1. Engine Oil: If there is no engine oil in the engine, the engine cannot operate normally. During engine operation, engine oil forms a thin film on the surfaces of various components inside the engine, preventing direct contact and friction between them. 2. Friction: If the components inside the engine come into direct contact and cause friction, it will accelerate engine wear and may also lead to engine overheating. If the engine continues to operate in an overheated state, it can result in severe engine malfunctions. Over time, all performance characteristics of engine oil degrade, so it is necessary to replace engine oil regularly.
Was this review help?
11
5
Share
RiverLee
08/12/25 7:39am
I've done quite a bit of car maintenance before. Using 0w20 oil for the new Magotan isn't a mandatory requirement, but it's strongly recommended by the manufacturer. The engine design of new cars is more refined, and low-viscosity oil like 0w20 can reduce internal friction, improve fuel efficiency by at least 10%, and also protect the turbocharger to extend its lifespan. From my observation, many car owners overlook this point and use old-style high-viscosity oils like 10w40, which can actually waste fuel money, accelerate carbon buildup, and potentially cause noise or performance degradation in the long run. The manual usually clearly marks the recommended oil specifications, which is a common practice for German cars. If you really can't find 0w20, you can temporarily use an alternative of the same SAE grade, but it's best to switch back to the genuine product as soon as possible to avoid warranty issues. Ambient temperature also has an impact—0w20 flows more smoothly in winter, and it's generally fine in summer even for long-distance trips. In short, don't cut corners for convenience; following the manual is the safest bet.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

Where is the SWM G05 produced?

SWM G05 is produced by Huachen Xinyuan Company. SWM (Shiwei) was originally an Italian brand and has been wholly acquired by Xinyuan Company. SWM G05 exterior design: The vehicle overall draws design elements from the SWM G01. In terms of details, the designers have used more sharp lines on its body, especially the large front grille, paired with the headlight design formed by geometric polygonal splicing, creating a visually imposing effect. The SWM G05 has a body size of 4750x1860x1780 mm in length, width, and height, with a wheelbase of 2750 mm. The car also features an oversized panoramic sunroof with an area of up to 1 square meter, and a trunk space with a maximum capacity of 1920 liters. At the rear, the car adopts the currently popular full-width taillights, which not only add a sense of fashion to the rear but also enrich the layering of the tail, while the air intakes on both sides give a strong sense of sportiness. SWM G05 powertrain: It is equipped with both 2.0L and 1.5T engines, with the 1.5T engine delivering a maximum power of 156 horsepower and a peak torque of 230 Nm. In terms of transmission, the 1.5T model offers a choice between a 6MT and a 6AT, with the 6-speed automatic transmission provided by Dongan; the 2.0L model only comes with a manual transmission and is standardly equipped with a 5-speed manual gearbox. For the chassis, the new car features a MacPherson independent front suspension and a torsion beam non-independent rear suspension.
1
4
Share

What to Do When the Remote Control Fails?

The solutions for a malfunctioning remote control are as follows: First, remove the battery cover of the remote control and check if the battery is low or dead. Replace it with a new battery if necessary. If the remote control still doesn't work after replacing the battery, remove the back cover of the remote control, use a cotton swab dipped in alcohol to clean the contacts on the circuit board, and then reassemble the remote control. The reasons for remote control failure are as follows: 1. Poor contact between the resistor ball on the remote key and the two sensing contacts on the ignition switch. 2. The remote control has been subjected to strong impact or dropped on a hard surface, causing the resistor inside the remote control to break or become demagnetized. 3. The remote control chip is damp or dirty, causing a short circuit or open circuit. 4. The resistance value of the remote control itself has changed, resulting in remote control failure.
2
4
Share

Is it necessary to fasten the seat belt for Subject 2?

It is necessary to fasten the seat belt for Subject 2. Below are the precautions for getting into the car for Subject 2: 1. Getting into the car: When there is no time limit for starting, close the car door first after getting in, and check if the car is turned off, which is crucial. 2. Adjusting the seat: Press the clutch pedal all the way down with your left foot and hold it, grip the steering wheel with your right hand, and adjust the seat with your left hand until your left foot is slightly bent and can exert force. Also, check the seat's stability by moving it back and forth. Adjust the backrest to a 90-degree angle with your body and ensure its stability by testing it back and forth. Then, place your hand on your head to measure if the height is the same as during regular practice. If it's too low, adjust it with a seat cushion. 4. Adjusting the left and right rearview mirrors: Adjust them to the appropriate positions. Key points for adjusting the left rearview mirror: Place the horizontal line at the center of the mirror, then adjust the car's edge to occupy 1/4 of the mirror's image. Key points for adjusting the right rearview mirror: Place the horizontal line at 2/3 of the mirror, then adjust the car's edge to occupy 1/4 of the mirror's image. 5. Fastening the seat belt: After fastening the seat belt, test the clutch again by pressing it all the way down with your left foot. Ensure your left foot is slightly bent and can exert force; otherwise, readjust. Then, test the brake pedal and the accelerator to confirm everything is fine before starting the test.
10
2
Share

Should You Release the Handbrake or Shift into Gear First When Starting the Car?

When starting the car, you should shift into gear first, then release the handbrake. On uneven roads, there may also be issues with the throttle or clutch. Shifting into gear before releasing the handbrake can prevent the car from rolling forward or backward, thus avoiding dangerous situations. The correct steps for starting the car are as follows: 1. Adjust the seat properly after getting in the car. An improper sitting posture may cause abnormalities while driving. 2. Start the engine, then observe whether there are any abnormalities in the indicator lights on the dashboard. 3. Press the clutch pedal all the way down with your left foot. If the clutch pedal is not fully depressed, it can easily damage the transmission gears. 4. Shift into first gear, then release the parking brake lever, i.e., the handbrake. 5. Release the clutch. 6. Gently press the accelerator.
12
0
Share

Can the BYD F0 seat be adjusted for height?

The BYD F0 seat cannot be adjusted for height. The seat can be moved forward and backward, and the backrest can be adjusted for tilt to find a suitable seating position. To adjust the seat's forward and backward position, pull the horizontal lever underneath. The angle of the rear seats can be reclined, and when folded down, they provide additional space in the trunk. The BYD F0 is a compact car introduced by BYD, equipped with the company's self-developed BYD371QA high-performance eco-friendly engine, with a displacement of 1.0L, meeting the National IV emission standards. The BYD F0 comes with dual airbags, ABS, power steering, and other systems. The car's dimensions are 3.460 meters in length, 1.618 meters in width, and 1.465 meters in height, with a wheelbase of 2.34 meters.
17
1
Share

What are the effects of not replacing spark plugs for a long time?

The consequences of not replacing car spark plugs for a long time include: 1. Difficulty in ignition, prone to stalling, insufficient power, weak acceleration, increased carbon deposit formation, manifested as lack of vehicle strength, slow acceleration when stepping on the throttle, and a missing gear in power; 2. Misfire causing cylinder inactivity (cylinder misfire), manifested as engine shaking, engine warning light turning on, and intermittent exhaust pipe sound with sputtering noises upon careful listening; 3. Incomplete combustion leading to failure to meet exhaust emission standards, causing environmental pollution. What are the effects of damaged spark plugs: If spark plugs are damaged, it can directly cause issues such as leakage in the vehicle's ignition system, increased fuel consumption, and reduced power. The most significant problem is difficulty in ignition, affecting the normal use of the vehicle. Severe spark plug erosion, with the top of the spark plug showing scarring, damage, or melted and eroded electrodes, indicates that the spark plug is destroyed and should be replaced.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.