Introduction to the gear function buttons of the Tiguan L

Do I need to adjust the rearview mirrors separately for reversing and driving?

There is no need to adjust the rearview mirrors separately for reversing and driving. Extended content on things to note during driving: 1. Observe carefully and judge accurately, never delay in reacting: When driving, stay focused, observe comprehensively and meticulously, and always pay attention to the movements of pedestrians on both sidewalks, intersections, and roadside. Anticipate potential hazards and make accurate judgments quickly based on the information perceived. Upon detecting someone crossing the road, promptly prepare to reduce speed, brake, or steer to the side. 2. Turn, yield, and maintain appropriate angles: Collisions between vehicles and pedestrians moving in the same direction often occur for two reasons—either the turning radius is too small during a turn, causing the driver to encroach on the pedestrian lane, or the steering angle is too large during overtaking, leading the vehicle into the non-motorized lane on the right and directly hitting pedestrians. 3. Prevent oncoming vehicles from occupying your lane early, drive on the right and avoid going against traffic: When you notice an oncoming vehicle crossing the centerline due to overtaking or other reasons and speeding toward you, react early by reducing speed or steering to the right if the road permits. 4. Encountering children or elderly pedestrians on the road, even if you're in the right, yield: Elderly pedestrians may not promptly and correctly perceive road signs or auditory and visual signals from vehicles, while children's movements are unpredictable, and they lack judgment and self-protection abilities. Therefore, when you see elderly or young pedestrians ahead, reduce speed as much as possible, stay ready to brake, and proceed cautiously only after ensuring safety.

11

2

Share

Why is the fault light on in Volkswagen Sagitar?

Introduction to the reasons for the Volkswagen Sagitar fault light being on: 1. Sensor issues: The sensors mentioned here include water temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or signal interruption, the car's ECU cannot accurately obtain engine data, which will cause the engine fault light to come on. 2. Maintenance issues: Poor engine maintenance is the most common cause of the engine fault light coming on. If the owner does not perform regular maintenance and has poor driving habits, it will increase the burden on the engine operation. 3. Oil quality issues: The oil quality mentioned here includes fuel and engine oil. The fuel injected into the car generally has a grade, and the engine oil is also divided into semi-synthetic and fully synthetic. The manufacturer usually recommends which grade of fuel and which type of engine oil the owner should use. If the owner does not add as required, it will cause engine wear over time, and the fault light will come on. 4. Poor mixture combustion: The engine's spark plug failure, ignition coil failure, fuel pump failure, fuel line blockage, etc. will all cause poor combustion of the engine mixture. Poor mixture combustion leads to engine carbon deposits or knocking problems, which will eventually be detected by the engine's oxygen sensor and reported to the ECU, naturally turning on the fault light as a warning. 5. Intake issues: When the engine is burning, it needs intake air. In this process, the air filter element is very important. If the car's air filter element is not clean and not cleaned regularly, it will affect the car's intake air. Over time, it can easily cause blockage, and in severe cases, it will cause the engine fault light to come on.

4

2

Share

What is the problem with severe overheating of power steering fluid?

Overheating of the oil pipe is caused by excessive load. Below is relevant information about the steering gear: 1. Introduction: The automotive steering gear, also known as the steering mechanism or power steering, is the most critical component in the car's steering system. Its function is to amplify the force transmitted from the steering wheel to the steering linkage and change the direction of force transmission. 2. Types of Steering Gears: (1) Rack and Pinion Steering: This is the most common type of steering gear. Its basic structure consists of a pair of meshing pinion and rack. When the steering shaft rotates the pinion, the rack moves linearly. Sometimes, the rack directly drives the tie rod, enabling the steering wheels to turn. Therefore, this is the simplest type of steering gear. Its advantages include simple structure, low cost, sensitive steering, compact size, and direct driving of the tie rod. It is widely used in automobiles. (2) Worm and Sector Steering: This type uses a worm as the driving part and a sector gear as the driven part. The worm has trapezoidal threads, and a finger-like tapered pin is supported by bearings on the sector gear, which is integrated with the steering arm shaft. When steering, the worm is rotated via the steering wheel, and the tapered pin embedded in the worm's helical groove rotates on its own while moving in an arc around the steering arm shaft, thereby driving the sector gear and steering arm to swing and turn the steering wheels through the steering linkage. This type is typically used in heavy-duty trucks requiring greater steering force. (3) Recirculating Ball Steering: The recirculating ball power steering system mainly consists of two parts: mechanical and hydraulic. The mechanical part includes the housing, side cover, upper cover, lower cover, recirculating ball screw, rack nut, rotary valve spool, and sector shaft. There are two pairs of transmission components: one is the screw and nut, and the other is the rack and sector gear or sector shaft. Recirculating steel balls are placed between the screw and rack nut, converting sliding friction into rolling friction, thereby improving transmission efficiency. The advantages of this steering gear are easy operation, minimal wear, and long service life. The disadvantages are complex structure, higher cost, and less sensitive steering compared to rack and pinion steering.

5

4

Share

What Happens If the Power Steering Hose Is Installed Backwards?

It will cause the inability to adjust the speed of gravity due to incorrect throttling direction. Below is relevant information about the steering gear: 1. Introduction: The automobile steering gear, also known as the steering mechanism or steering box, is the most crucial component in a vehicle's steering system. Its function is to amplify the force transmitted from the steering wheel to the steering linkage and to alter the direction of force transmission. 2. Types of Steering Gears: (1) Rack and Pinion Steering: This is the most common type of steering gear. Its basic structure consists of a pair of meshing pinion and rack. When the steering shaft rotates the pinion, the rack moves linearly. Sometimes, the rack directly drives the tie rod, enabling the steering wheels to turn. Therefore, this is the simplest type of steering gear. Its advantages include simple structure, low cost, sensitive steering, compact size, and the ability to directly drive the tie rod. It is widely used in automobiles. (2) Worm and Roller Steering: In this steering gear, the worm is the driving component, and the roller is the driven component. The worm has trapezoidal threads, and the finger-like tapered roller is supported by bearings on the crank, which is integrated with the steering rocker arm shaft. When steering, the rotation of the steering wheel turns the worm, and the tapered roller embedded in the worm's spiral groove rotates while moving in an arc around the steering rocker arm shaft, thereby driving the crank and steering arm to swing and causing the steering wheels to turn through the steering linkage. This type of steering gear is typically used in heavy-duty trucks requiring greater steering force. (3) Recirculating Ball Steering: The recirculating ball power steering system mainly consists of two parts: mechanical and hydraulic. The mechanical part includes the housing, side cover, upper cover, lower cover, recirculating ball screw, rack nut, rotary valve spool, and sector gear shaft. There are two pairs of transmission components: one is the screw and nut, and the other is the rack and sector gear or sector gear shaft. Between the screw and the rack nut, there are recirculating steel balls that convert sliding friction into rolling friction, thereby improving transmission efficiency. The advantages of this steering gear are easy operation, minimal wear, and long service life. The disadvantages are complex structure, higher cost, and less sensitive steering compared to the rack and pinion type.

3

1

Share

Can the Dodge Ram Use 92 Octane Gasoline?

The Dodge Ram can use 92 octane gasoline. This octane rating is recommended in the vehicle's official owner's manual. In addition to checking the suitable gasoline octane rating in the owner's manual, the Dodge Ram also indicates it on the fuel tank cap. You can usually determine the appropriate gasoline grade based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a ratio between 10.0-11.5 should use 95 octane. If the compression ratio is even higher, 98 octane gasoline is recommended. However, with the application of new technologies, the compression ratio alone cannot determine the required gasoline grade. High-compression engines can also be tuned to use lower-octane gasoline, as factors like ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane rating, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If you occasionally use the wrong gasoline octane rating in the Dodge Ram, simply switch back to the correct one after refueling. However, long-term use of the wrong octane rating can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increased octane value can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. The significantly lower octane value reduces the fuel's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is generated during the upward stroke, making the engine run very unstable. Mild knocking only increases noise without significant engine damage, but noticeable knocking indicates severe engine conditions, affecting driving stability and causing abnormal wear on pistons and cylinders, potentially leading to cylinder scoring.

4

5

Share

Is 80 points a passing score for C1 Subject 3?

80 points is not a passing score. The passing score for the C1 Subject 3 test is 90 points, with a full score of 100 points. According to Article 30 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" (Ministry of Public Security Order No. 123), the passing standards for each subject test are as follows: Subject 1 test has a full score of 100 points, and a score of 90 points is considered passing. Subject 2 test has a full score of 100 points. For large buses, trailers, city buses, medium-sized buses, and large trucks, a score of 90 points is considered passing. For other vehicle types, a score of 80 points is considered passing. Subject 3 road driving skills and safe and civilized driving knowledge tests each have a full score of 100 points, and a score of 90 points is considered passing. Subject 3: Includes road driving skills test and safe and civilized driving knowledge test. It is part of the motor vehicle driving license test and is also the abbreviation for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver test. The content of the road driving skills test varies for different vehicle types. Subject 3 test items: Vehicle preparation, light simulation, starting, straight-line driving, lane changing, passing intersections, passing crosswalks, passing school zones, passing bus stops, meeting vehicles, overtaking, U-turns, gear shifting operations, left turns at intersections, right turns at intersections, and pulling over. Only straight-line driving, gear shifting, and pulling over are mandatory. The safe driving knowledge test generally includes: safe and civilized driving operation requirements, safe driving knowledge in bad weather and complex road conditions, emergency handling methods such as tire blowouts, and post-accident handling knowledge. Precautions for the C1 Subject 3 test are as follows: Pre-test preparation: Walk around the vehicle once before getting in, and pause near the monitoring area. Light simulation: Check if the light switch is reset before the simulation test begins. Starting: Observe the surrounding traffic environment before starting. During driving: Keep your eyes on the road ahead and avoid following too closely. Deduction points for the C1 license Subject 3 test are as follows: Failing to observe the rear and right traffic conditions through the interior and exterior rearview mirrors before stopping results in failure. Failing to stop within the specified distance after the examiner issues the pull-over command results in failure. If the vehicle body exceeds the right edge of the road or the sidewalk edge after stopping, it results in failure. Failing to observe the side and left traffic conditions before opening the door after stopping results in failure. Not using or incorrectly using the turn signal before stopping deducts 10 points. Turning the steering wheel less than 3 seconds after activating the turn signal before stopping deducts 10 points. If the vehicle body is more than 30 cm from the right edge of the road or the sidewalk edge after stopping, it deducts 10 points. Not tightening the parking brake lever after stopping deducts 10 points. Releasing the foot brake before tightening the parking brake lever deducts 10 points. Not turning off the engine before getting out deducts 5 points.

16

4

Share

Introduction to the gear function buttons of the Tiguan L

Do I need to adjust the rearview mirrors separately for reversing and driving?

Why is the fault light on in Volkswagen Sagitar?

What is the problem with severe overheating of power steering fluid?

What Happens If the Power Steering Hose Is Installed Backwards?

Can the Dodge Ram Use 92 Octane Gasoline?

Is 80 points a passing score for C1 Subject 3?

Is It Normal for the Enclave's Water Temperature to Reach 107?

Where is the 12 o'clock position on the steering wheel?

Where to apply for a car ETC?

How Much Car Color Change Does Not Require Registration?