Introduction to the 2021 Teana and 2021 Sagitar

1 Answers
McAugust
07/30/25 12:11am
1. Exterior Design: The all-new Sagitar can be recognized as a Volkswagen vehicle even without the logo, thanks to the brand's signature family design. The front face of the Sagitar maintains Volkswagen's distinctive style, with sharp headlights and a wide front bumper, adding a youthful and dynamic touch. 2. Interior Features: The Teana is built on Nissan's FF-L platform, featuring a MacPherson strut front suspension and a newly designed multi-link rear suspension. This combination ensures ride comfort while improving handling, stability, and reducing road noise. Additionally, the Teana is equipped with a VDC (Vehicle Dynamic Control) system, which integrates safety systems like EBD, TSC, and ABS, significantly enhancing traction and steering stability. 3. Powertrain: The all-new Sagitar 1.4TSI model is powered by FAW-Volkswagen's advanced 1.4TSI engine, delivering a maximum power of 96kW. It achieves a peak torque of 220Nm at a low engine speed of 1,750 rpm, which can be sustained up to 3,500 rpm.
Was this review help?
18
2
Share
More Forum Discussions

Why does the Haval H2s fail to start and display an automatic parking fault?

Automatic parking fault preventing startup is caused by a stuck automatic parking button or a damaged ABS pump. Below are detailed explanations: Stuck automatic parking button: The automatic parking button is stuck, preventing the automatic parking function from being released. Solution: Check for any foreign objects. If none are found, reset the electronic parking brake. Turn on the car key, press the foot brake, then hold the electronic parking brake down for 5 seconds and pull it up for another 5 seconds. This will initialize and reset the electronic parking brake. Damaged ABS pump: A damaged ABS pump prevents the car from starting. Solution: Replace the ABS pump with a new one.
10
2
Share

Can the original license plate be used when buying a used car?

When purchasing a used car, the original license plate cannot be used. The functions of a license plate are: 1. To number and register information for each vehicle; 2. To identify the region to which the vehicle belongs; 3. To allow access to the owner's and vehicle's registration information based on the license plate. Types of license plates include: 1. White plates, which represent military and police vehicles; 2. Blue plates, which represent ordinary small vehicles with fewer than 7 seats; 3. Yellow plates, which represent ordinary large vehicles; 4. Black plates, which represent foreign enterprise vehicles. The method for installing a license plate is: 1. Take out the screws for the license plate and insert them into the anti-theft caps by rotating; 2. Position the license plate correctly, align the screws with the gaps on the bumper, and secure them using tools; 3. Cover the anti-theft caps and press them into place.
5
0
Share

What is the reason for the failure of the Regal's auto start-stop function?

The reason for the failure of the Regal's auto start-stop function: It may be caused by a malfunction in the car's battery, which needs to be checked. The auto start-stop function is a feature where the engine automatically shuts off when the car needs to temporarily stop during driving and automatically restarts when the car needs to move forward again. The Regal is a mid-size car under SAIC-GM Buick, with a length, width, and height of 4913 mm, 1863 mm, and 1462 mm respectively, and a wheelbase of 2829 mm. In terms of power, the Regal is equipped with a turbocharged engine, which has a maximum horsepower of 237 hp, a maximum torque of 350 Nm, and a maximum power of 174 kW.
2
2
Share

Does a Car Consume Fuel When Started but Not Moving?

When a car is started but not moving, it does consume fuel, albeit less than when driving. Prolonged idling can damage the car's engine. If the car is running but not moving, it indicates that the engine is in an idle state. Idling refers to the engine running without load, with the engine speed typically ranging between 550 to 800 revolutions per minute. Prolonged idling can easily lead to carbon buildup in the engine. Both high and low idle speeds are undesirable. A high idle speed can affect the engine's fuel consumption, potentially increasing it, raising the internal temperature of the engine, and accelerating engine wear, thereby reducing the engine's lifespan. Conversely, prolonged low idle speeds can cause the car to stall. Stalling can occur in two scenarios: one is stalling while idling, and the other is stalling while the car is in motion.
16
3
Share

Why Do French Cars Have Poor Resale Value?

The main reasons for the poor resale value of French cars are their low ownership volume and generally high prices. In 1992, a large number of French cars entered the Chinese automotive market, but they failed to adequately meet the needs of Chinese consumers and thus did not gain a foothold in the market. 1. The shortcomings of French cars are primarily due to design issues. Domestic consumers are not accustomed to the romantic design style of French cars, which, whether in terms of exterior design or interior space, do not hold a competitive edge among vehicles of the same class. This undoubtedly affects overall sales. 2. The two core components of French cars—the engine and transmission—use outdated technology. Some engines have been in use for many years and are still being utilized today. In terms of transmissions, while other automakers had long adopted 8AT transmissions, French cars only recently abandoned their long-used 4AT transmissions in favor of 6AT transmissions. The imperfect technological transition has resulted in French cars lacking an advantage in fuel efficiency.
2
1
Share

What is the size of the Lingdong brake disc?

Lingdong brake disc is sixteen inches. The brake disc is a round disc that rotates when the vehicle is moving. When the brake is applied, the brake caliper clamps the brake disc to slow down or stop the vehicle. The brake disc is a very important component of the braking system, which can be divided into disc brakes, drum brakes, and air brakes. Structurally, it can be categorized into solid brake discs and ventilated discs, and by material, it can be divided into carbon fiber ceramic brake discs and metal brake discs. The maintenance methods for brake discs include: 1. Develop good driving habits; 2. Avoid emergency braking; 3. Regularly check the brake pads and brake discs; 4. Inspect the thickness of the friction pads; 5. Have a professional check the brake shoes; 6. Replace with original equipment manufacturer (OEM) provided brake pads and brake discs when necessary.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.