Introduction to Mitsubishi 4K22D4M Engine?

2 Answers
PaulRose
09/01/25 8:00am
Mitsubishi 4K22D4M gasoline engine meets China VI-B emission standards, with a maximum power of 118kW, peak torque of 230N·m, and fuel consumption of 8.7 liters per 100 kilometers. The following is relevant information: Mitsubishi Engine: The Mitsubishi 4G engine is a 1834cm3 displacement engine developed by Mitsubishi, which adopts GDI (Gasoline Direct Injection) technology, meaning gasoline is directly injected into the cylinder. By directly injecting gasoline into the cylinder, it achieves high-response and high-precision fuel control. The 4G9 series engine is a high-performance, highly reliable advanced product used in China's mid-to-high-end sedans, MPVs, and SUVs.
Was this review help?
7
1
Share
Blakely
09/14/25 3:40am
As a veteran delivery driver who frequently operates small trucks, I use the Mitsubishi Delica equipped with the 4K22D4M diesel engine. This engine is incredibly reliable – it has never let me down in over a decade of daily hauling through city streets and mountain roads. With a displacement of around 2.2 liters, it delivers ample power for overtaking without breaking a sweat, and the fuel efficiency is outstanding, averaging just 7-8 liters of diesel per 100 km. Filling up the tank easily gets me 500-600 kilometers. Even in slightly cold weather, it starts right up with a turn of the key, proving far more dependable than gasoline engines. Maintenance is a breeze – changing the oil and filters myself costs very little, and it can run on lower-grade fuel to save money. Like other engines in the 4K series, it's built to last and handles tough jobs without complaint. If I were to choose a commercial vehicle, this would be my top pick.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

Is Peeling License Plate Eligible for Free Replacement?

Peeling license plates are not eligible for free replacement unless caused by human factors. Below is relevant information about license plates: Functions of License Plates: License plates serve as identification numbers and information registration for vehicles. Their primary purpose is to indicate the vehicle's registered region through the plate number, and to trace the vehicle owner and registration details based on the plate. License Plate Authority Codes: The first character of a license plate is a Chinese character, while the second is an English letter. When assigning letter codes for prefecture-level administrative divisions, the letters I and O are skipped. The letter O is typically reserved for police vehicles or government agencies (though this does not apply to the letter O used in military or armed police plates).
1
3
Share

What engine does the Maybach 57 use?

The Maybach 57 is equipped with a 5.5-liter V12 twin-turbocharged engine. The latest car under the Maybach brand is the Maybach S-Class, which is larger, more expensive, and more luxurious than the standard Mercedes-Benz S-Class. Here are some extended details about the Maybach 57: 1. The Maybach 57's engine delivers 551 horsepower and a maximum torque of 900 Nm. 2. The engine outputs maximum power at 5250 rpm and maximum torque between 2200 and 3000 rpm. 3. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 4. This engine is paired with a 5-speed automatic transmission. 5. The Maybach 57 uses active air suspension for both the front and rear suspension.
20
3
Share

Why are the tail light colors different on the Baojun 360?

Baojun 360 tail lights have different colors. The rear tail lights are equipped with three colors: red brake lights, yellow turn signals, as well as rear fog lights (left rear) and white reverse lights (right rear). The vehicle tail lights include the following types: 1. Rear position lights: Visible from the rear of the vehicle, used to indicate the presence and width of the vehicle. 2. Rear turn signals: Used to indicate to other road users behind that the vehicle is turning right or left. 3. Brake lights: Indicate to other road users behind the vehicle that the vehicle is braking. 4. Rear fog lights: In foggy conditions, make the vehicle more visible when viewed from the rear. 5. Reverse lights: Illuminate the road behind the vehicle and warn other road users that the vehicle is or is about to reverse.
17
0
Share

Where to Install the Car GPS?

The original GPS tracker of the vehicle is generally installed inside the A-pillar of the car body or at the position of the roof antenna, where the signal will not be significantly interfered with. As for aftermarket GPS trackers, they can be installed anywhere. Common GPS installation locations are as follows: 1. On the vehicle chassis: This location is difficult to discover and locate the GPS tracker without lifting the car. 2. Inside the dashboard: Installing it here is quite hidden, as it is hard to find unless the dashboard is removed or internal repairs are being done. 3. Inside the front or rear bumper: Since the GPS tracker is installed inside the bumper, it is difficult to be seen, making this location sufficiently concealed and secure. 4. Inside the trunk: The car trunk is spacious, offering many possible installation spots. The trunk does not block GPS signals, so it won’t affect the positioning performance.
2
4
Share

What is the displacement of the Sagitar 280TSI?

The displacement of the Sagitar 280TSI is 1.4T. Below is a related introduction to the Sagitar 280TSI: Power: The Sagitar 280TSI is equipped with a 1.4T turbocharged engine, with a maximum power output of 110KW and a maximum torque of 250NM. The maximum horsepower (Ps) is 150. Body Dimensions: The body length, width, and height are 4753mm, 1800mm, and 1462mm respectively, with a wheelbase of 2731mm. Suspension: The front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.
19
1
Share

Is the Audi Q2L transmission dry or wet?

Audi Q2L adopts a 7-speed wet dual-clutch transmission, which has excellent adjustment capability and superior thermal conductivity, enabling it to transmit relatively large torque. Here is more information about wet dual-clutch transmissions: 1. Wet dual-clutch transmissions use a hydraulic torque converter as the clutch. The connection between the driving disc and the driven disc relies on oil lubrication in a sealed space, so the higher the oil pressure, the higher the transmission ratio. 2. Regarding heat dissipation, the clutch of a wet dual-clutch transmission is immersed in transmission oil, which also helps dissipate heat. Therefore, wet dual-clutch transmissions rarely encounter overheating issues. 3. They can also withstand high torque, making them suitable for both small and large displacement vehicles.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.