Introduction to Car Key Functions

What are the reasons for the high temperature of Honda CB400X?

Motorcycle engines operate under high-temperature conditions, with the maximum temperature during combustion of the combustible mixture reaching over 2000 degrees Celsius. The heat from high-temperature gases and friction generated by moving engine components can cause the temperature of parts such as pistons, cylinder blocks, and cylinder heads to rise. High temperatures can lead to thermal deformation, reducing the mechanical strength of engine components and altering normal clearances due to excessive thermal expansion. Cooling System: Motorcycle engines must have a reliable cooling system to ensure normal operation. The normal working temperature of a motorcycle engine under load should not be too low or too high, with the optimal lubricating oil temperature being around 70 degrees Celsius. Excessive engine temperature will result in decreased performance and may even cause the engine to continue running after turning off the ignition switch. Oil stains on the cylinder head and block may burn and smoke, and oil leaks may occur. Hazards: Engine overheating poses significant risks, including decreased motorcycle performance and increased fuel consumption; abnormal combustion of the air-fuel mixture; degradation and coking of lubricating oil, leading to the destruction of oil films between moving parts and accelerated wear; seizure of big and small end bearings of the crankshaft and connecting rod, as well as failures such as piston ring breakage, cylinder scoring, and seizure; and shortened engine lifespan, endangering the rider's safety.

18

3

Share

How many colors does the Jetta VS5 come in?

Jetta VS5 comes in five colors: Lemon Gold, Incense Gray, Moonlight Silver, Polar White, and Agate Red. The Jetta VS5 is a compact SUV launched by Jetta. In terms of body dimensions, it measures 4419mm in length, 1841mm in width, and 1616mm in height, with a wheelbase of 2630mm. The Jetta VS5 is built on the Volkswagen MQB A1 platform and adopts the X design language. It features keyless start, keyless entry, rain-sensing wipers, LED headlights, leather seats, cruise control, and an 8-inch touchscreen supporting CarPlay.

10

4

Share

What does the wrench symbol mean when starting a Volkswagen Polo?

When the wrench symbol appears during the startup of a Volkswagen Polo, it indicates the service reminder function set by Volkswagen to notify the owner of scheduled maintenance based on mileage. The flashing symbol serves as a prompt. After maintenance is completed, the service light needs to be reset according to the procedure for it to turn off. The Polo is a compact car launched by SAIC Volkswagen, with body dimensions of 3970mm in length, 1682mm in width, and 1462mm in height, and a wheelbase of 2470mm. In terms of appearance, the Volkswagen Polo is sporty and stylish, featuring mainstream configurations such as LED side turn signals integrated into the headlights.

7

3

Share

What Are the Causes of Engine Block Cracking?

There are many reasons that can cause engine block cracking, such as adding water instead of antifreeze to the radiator. When the outside temperature is too low, the water inside the engine block freezes, causing the block to crack. Engine water shortage, overheating, and then adding too much cold water directly or splashing cold water onto the engine can cause the engine block to crack due to thermal shock. Severe impacts can also lead to cracks in the engine block. Engine Connecting Rod Fracture: Water entering the engine cylinders can cause the connecting rods to break. When a vehicle drives through flooded roads, water can be sucked into the cylinders. The water initially entering the cylinders quickly turns into steam due to the high temperature of the block, making it impossible for the cylinder to form a combustible mixture. As more water enters, it accumulates on top of the piston, reducing the effective volume of the combustion chamber and increasing compression resistance, which in turn increases the pressure transmitted from the piston to the connecting rod. When the water volume reaches a certain level, the compression stroke essentially becomes compression of water, drastically increasing the pressure on the connecting rod, causing it to bend, deform, and eventually break, potentially even rupturing the engine block. Repair Methods: To repair a cracked engine block, use coarse sandpaper to remove rust around the crack. When sanded to a certain extent, the terminal point of the crack can be identified. Then, directly weld a repair plate, but be cautious of warping at the welded area. If warping occurs, it must be hammered while hot to prevent residual slag. After repair, place an asbestos gasket between the repair plate and the block, and apply a layer of lubricating oil on both sides.

15

2

Share

What is the difference between Tang DM and DMI?

Here are the differences between BYD Tang DM and DMI: 1. The main powertrain systems of these two cars are different. There is little difference in appearance. 2. Tang DM is equipped with a 2.0T + plug-in hybrid system. The maximum power of the engine is 141kw, and the motor uses ternary lithium batteries, with a maximum pure electric range of 100km. 3. Tang DMI is equipped with a 1.5 plug-in hybrid system. The engine of this model is not as powerful, but the motor uses lithium iron phosphate "Blade Battery", which can greatly improve the pure electric range.

6

0

Share

How to Determine the Condition of Engine Valves?

Check the condition of the valve head to the valve stem using the following methods: 1. Pitting on the valve seat; 2. Insufficient valve margin thickness; 3. Bent valve stem; 4. Pitting or severe wear on the valve stem; 5. Wear on the valve lock key groove; 6. Wear on the valve stem end. Additional relevant information is as follows: 1. Proper valve maintenance is crucial for engine performance. Therefore, it is essential to follow all measurement procedures in detail to identify components that exceed specifications. 2. If the measurement procedure indicates that the valve or valve seat requires reconditioning, the measurement procedure should be performed again after reconditioning.

10

3

Share

Introduction to Car Key Functions

What are the reasons for the high temperature of Honda CB400X?

How many colors does the Jetta VS5 come in?

What does the wrench symbol mean when starting a Volkswagen Polo?

What Are the Causes of Engine Block Cracking?

What is the difference between Tang DM and DMI?

How to Determine the Condition of Engine Valves?

Must the Thrust Bearing Be Replaced?

What is the ground clearance of the new Highlander?

How to Repair a Damaged Plastic Rear Bumper on a Nissan Qashqai?

What to Do When Car Window Makes Noise While Rolling Up?