Introduction and Usage of Buttons in the Buick Excelle Interior

1 Answers
RichardMarie
07/29/25 9:44pm
Introduction and usage of buttons in the Buick Excelle interior are as follows: 1. Electronic Stability Program (ESP): The system is enabled by default. It is not recommended to turn it off unless driving on slippery surfaces such as during rain or snow. 2. Auto Start-Stop: At traffic lights, the engine is temporarily shut off. When the driver's foot leaves the brake pedal, the vehicle will restart. 3. Recirculation/Fresh Air Mode: Recirculation mode heats or cools the air inside the car and recirculates it, while fresh air mode allows outside air to enter the vehicle. Use recirculation mode in heavy traffic, tunnels, or when the outside air quality is poor. On highways, it is advisable to periodically switch from recirculation to fresh air mode, with recirculation use not exceeding one hour at a time.
Was this review help?
18
5
Share
More Forum Discussions

What brand is radial tire?

radial refers to radial tires, with the international code R, and is not a brand. Radial tires: Radial tires were patented by Michelin in 1946. They are composed of two or three layers of steel belts cross-placed and adhered to the cord body. The carcass cords of radial tires run from one bead to the other, similar to the Earth's meridians, hence the name radial tires. Currently, most passenger car tires are radial tires. Advantages: Radial tires have many advantages over bias-ply tires, which is why they are the current standard in tire construction. Their advantages include: larger contact area, better adhesion, less tread slippage, lower unit pressure on the ground, lower rolling resistance, longer service life, thicker tread with a hard belt layer, and better puncture resistance.
19
4
Share

What does the exclamation light in a car mean?

Car exclamation light is a conventional fault indicator light, which may light up due to the following reasons: 1. Overheating of the dry dual-clutch transmission clutch; 2. Intervention or malfunction of the fuel cut-off system; 3. Parking sensor failure; 4. External light failure; 5. Engine oil pressure sensor failure. The car fault light indicates that there is a virtual fault in the system, which can be cleared with an instrument to turn off the light. There may also be a soft fault in the system that needs to be checked and eliminated, but the soft fault at this time does not affect the starting of the car. It is recommended that the owner go to a repair shop to read the fault code with an instrument and clear the code.
16
0
Share

What is a Dual Clutch?

Dual clutch refers to a dual-clutch transmission (DCT), which operates with two sets of clutches working simultaneously. One set manages the odd-numbered gears, while the other manages the even-numbered gears. The power transmission is achieved through two clutches connecting two input shafts, with adjacent gears alternately meshing with the gears on the two input shafts. By coordinating the control of the two clutches, it can change the transmission ratio without interrupting power, thereby reducing shift time and effectively improving shift quality. Different manufacturers have different names for dual-clutch transmissions: Volkswagen calls it DSG, Audi calls it Stronic, and Porsche calls it PDK. The advantages of dual-clutch transmissions include: fast shifting speed, low production cost, compact size, and low fuel consumption.
19
1
Share

How to Completely Replace Antifreeze?

Method for completely replacing antifreeze: 1. Unscrew the radiator cap, open the radiator drain valve (usually located at the bottom of the car), and drain the antifreeze; 2. Clean the cooling system by continuously injecting clean water into the engine cooling system. During the flushing process, keep the engine idling to maintain the circulation of clean water inside until clear water flows out from the radiator; 3. Stop injecting clean water, wait for the water to drain completely, then close the drain valve; 4. Fill with new antifreeze until the liquid level is between the max and min marks; 5. Close the cap, start the car, and let the engine idle for two to three minutes. The cooling system will expel internal air, causing the antifreeze level to drop slightly. At this point, top up the antifreeze again.
14
3
Share

Is the Infiniti QX50 domestically produced?

Infiniti QX50 is domestically produced. It is a mid-size SUV under Dongfeng Infiniti, which is a joint venture brand. The Infiniti QX50 is built on Infiniti's new luxury SUV four-wheel-drive platform and equipped with the world's first mass-produced variable compression ratio engine, VC-Turbo. The QX50 also features the ADAS intelligent driving assistance system and innovative technologies, including DAS 2.0, delivering a relaxed, safe, and ultimate driving experience. In terms of body dimensions, the Infiniti QX50 measures 4705mm in length, 1903mm in width, and 1678mm in height, with a wheelbase of 2798mm.
1
4
Share

Where is the OBD interface located in the Foton View Express?

The OBD interface of the Foton View Express is located under the driver's seat. Open it from behind the driver's seat, and you can see the battery. The OBD interface is behind the battery, in the battery box near the front of the vehicle. OBD stands for On-Board Diagnostics in Chinese. The View Express is a van launched by Beiqi Foton. The 2.0L manual classic model has a body length, width, and height of 5020mm, 1690mm, and 1935mm respectively, with a wheelbase of 2590mm and a minimum ground clearance of 165mm. In terms of suspension, the front suspension of the Foton View Express is a double-wishbone torsion bar independent suspension, and the rear suspension is a longitudinal leaf spring non-independent suspension.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.