Insufficient Battery in Civic Smart Key?

How is the off-road performance of the Subaru Tribeca?

Subaru Tribeca has good off-road performance, featuring an H4 horizontally opposed engine, similar to Porsche's horizontally opposed engine. In terms of power: The Tribeca originally came with a horizontally opposed 6-cylinder engine. By increasing the cylinder bore and stroke, the displacement was expanded from 3.0 liters to 3.6 liters. Engine specifications: The maximum power was increased from 245 horsepower to 256 horsepower at 6600 rpm, while the peak torque rose from 297 Nm at 4200 rpm to 335 Nm at 4400 rpm. Additionally, this engine is 4.4 kg lighter and has seen improvements in fuel consumption and emissions.

20

5

Share

What is the fuel consumption of the Envision idling with AC on for one hour?

The fuel consumption of the Envision idling with AC on for one hour is approximately 1-3 liters, varying by model. Hazards of idling with AC on: When the engine operates at low RPM in idle for extended periods, it is more prone to carbon buildup on pistons and valves. Excessive carbon deposits can directly impact fuel economy and may also affect engine performance and even lifespan. Idling: This refers to an operating condition where the engine runs without engaging any gear. The engine speed during idling is called idle speed, which can be adjusted by modifying the throttle opening size.

17

0

Share

What is the center bore data for the Teana wheel hub?

The Teana wheel hub for the Murano convertible edition features an 18-inch wheel with ET40, a center bore of 66.1, and a bolt pattern of 5X114.3. It can be directly installed without the need for a hub centric ring. The recommended tire size is 225/45R18. Wheel bolt pattern: The professional term for wheel bolt pattern is Pitch Circle Diameter (PCD), which refers to the diameter of the circle formed by the centers of the mounting bolts on the wheel hub. Most wheel hubs have either 5 or 4 bolt holes, with varying distances between them. This leads to designations like 4X103, 5X114.3, and 5X112. For example, 5X114.3 indicates that the wheel hub's PCD is 114.3mm with 5 bolt holes. Checking tire wear condition: This includes verifying whether the tire has worn down to the wear indicators normally and checking for uneven wear. Tires with severe abnormal wear should have the cause investigated promptly and be replaced as necessary.

9

1

Share

What is the reason for the Volkswagen Bora idling at 1200 rpm?

Idling at 1200 rpm is designed as a cold fast idle to quickly raise the engine temperature to normal operating levels when the car is cold. Once the temperature reaches normal levels, it automatically returns to normal idle speed. Therefore, this occurs every time the car is cold started, which is a normal phenomenon. Idling: It is an operating condition of a car, referring to the engine running in neutral gear. The engine speed during idling is called the idle speed. Cold fast idle: When the car is cold started, the vehicle's computer allows the engine to have a high idle speed for several seconds to about a minute. Once the coolant temperature rises to the set temperature, the idle speed returns to normal.

20

3

Share

Is Points Deducted for Not Using Turn Signal When Turning Left?

Not using the turn signal or using it incorrectly will result in a deduction of 10 points at a time. The specific regulations are as follows: Failing to use or incorrectly using the turn signal before starting, turning, changing lanes, overtaking, or parking will result in a deduction of 10 points. Turning the steering wheel within 3 seconds of activating the turn signal before starting, turning, changing lanes, overtaking, or parking will result in a deduction of 10 points. Subject 2 (Driving Test) requires the use of turn signals in 6 situations, which are: Activate the left turn signal when starting the vehicle; Activate the left turn signal when starting on a slope; Activate the right turn signal when pulling over for parallel parking, stopping the vehicle 30 cm from the curb before reversing; Activate the left turn signal before shifting into reverse gear for parallel parking, as the steering wheel will be turned fully to the right during reversing, causing the front of the car to shift left; Before exiting the parking space during parallel parking, shift into drive gear and activate the left turn signal, turning it off promptly after exiting; Activate the left turn signal when entering a right-angle turn, turning it off promptly after completing the turn. Subject 2 is scored out of 100 points, with criteria for failure, deductions of 20 points, 10 points, and 5 points. The test is passed if the following conditions are met: ① For large buses, tractors, city buses, medium buses, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The test items for small vehicles C1 and C2 include reversing into a parking space, parallel parking, stopping and starting on a slope (canceled for C2), right-angle turns, and curve driving (commonly known as S-curves) (some regions also include a sixth item: highway card collection). The test items for large vehicles A1, A2, A3, B1, and B2 include pole test, stopping and starting on a slope, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, passing through a narrow gate, passing continuous obstacles, driving on bumpy roads, U-turns on narrow roads, as well as simulated highways, continuous sharp mountain curves, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling.

11

4

Share

What Causes No Sound from the Rear Speakers of a Civic?

The reason for no sound from the rear speakers of a Civic may be due to damage to the speakers themselves or poor contact caused by wiring damage. Contact Point Erosion: Prolonged use of the speakers can easily cause erosion of the contact points, resulting in impedance. Poor Sealing Leading to Moisture: Although the speakers are internally sealed, if the sealing is not tight, moisture can enter during car washing or water vapor in the internal space can cause the contact points to become damp, preventing normal operation. Poor Contact at Electromagnetic Coil Terminals: Some speakers have electromagnetic coil terminals connected with aluminum metal rivets instead of secure welding. If the insulation paint on the enameled wire ends is not properly removed or the rivets are not tightly crimped, it can easily lead to poor contact, causing the speakers to malfunction.

16

0

Share

Insufficient Battery in Civic Smart Key?

How is the off-road performance of the Subaru Tribeca?

What is the fuel consumption of the Envision idling with AC on for one hour?

What is the center bore data for the Teana wheel hub?

What is the reason for the Volkswagen Bora idling at 1200 rpm?

Is Points Deducted for Not Using Turn Signal When Turning Left?

What Causes No Sound from the Rear Speakers of a Civic?

Chery Tiggo 8 Engine Compression Ratio?

What Causes the Volkswagen Touran to Shake When Cold?

Is the MG 6 Turbocharged or Naturally Aspirated?

Does BMW Clock Spring Replacement Require Matching?