In which year will a 2007 car reach 15 years?

1 Answers
MadisonAnn
07/30/25 9:34am
A 2007 car will reach 15 years in 2022, and starting from 2022, it will require two inspections per year. Each year, the motor vehicle must undergo two on-site inspections, and only after passing the inspections can the vehicle be driven on the road. Below is extended information about annual inspections: Annual inspection procedures: For the annual inspection of a motor vehicle, the following documents are required: the vehicle's driving license, the current year's compulsory traffic insurance policy, and the ID card or a copy of the vehicle owner. Any outstanding traffic violations must be resolved, and any unresolved traffic accidents involving the vehicle must be settled. It is necessary to make an appointment in advance when handling the annual inspection procedures to save time. Impact of failing an inspection: Vehicles that have not undergone annual inspections are not allowed to be driven on the road. Motor vehicles must complete the annual inspection procedures to be legally driven; otherwise, it is considered an illegal act. If a motor vehicle fails to undergo inspections for three consecutive inspection cycles, it will be forcibly scrapped.
Was this review help?
3
5
Share
More Forum Discussions

Can the Car Engine Compartment Be Washed with Water?

When the car engine compartment is too dirty, it can be directly washed with water or rinsed with a high-pressure water gun. The steps to clean the engine compartment are as follows: 1. Spray foam cleaner on areas with excessive oil sludge in the engine compartment. 2. Wipe off the foam remaining on the engine with a cloth, then evenly spray water on the engine compartment using a spray bottle. 3. Wipe the water off the engine with a cloth, carefully clean the delicate parts, and wait for it to dry. The benefits of cleaning the engine compartment are as follows: 1. Protect the wiring and oil pipes in the engine compartment, preventing rubber parts from aging, cracking, and metal from rusting and accumulating dirt. 2. Reduce damage from acid rain and corrosive substances to external components of the engine, extending the lifespan of the original parts.
4
1
Share

What Causes Difficulty Starting a Car After Prolonged Sun Exposure?

Difficulty starting a car after prolonged sun exposure is caused by a malfunctioning carbon canister purge valve. Solutions for starting difficulties caused by a faulty carbon canister purge valve are as follows: 1. Turn off the engine, disconnect the connecting pipe, and attempt to suck air through it. If the carbon canister purge valve is functioning properly in its closed state, you should not be able to suck air through it. If air can be sucked through, this indicates damage and the valve needs to be replaced. 2. If the external ambient temperature is too high, affecting the coolant temperature sensor and causing it to malfunction, the vehicle will activate a self-protection program to prevent damage. This keeps the vehicle in a shutdown state. Once the external temperature returns to normal levels, the vehicle can be started normally.
16
5
Share

What engine does the Beijing BJ40 have?

The BJ40 is equipped with a 2.4L inline-four naturally aspirated engine codenamed G4CA, which is an improved version of the 2.7L engine previously used in the BAW Warrior. It offers two power options: 2.0T and 2.3T, with maximum torque outputs of 320N·m and 350N·m respectively. More details are as follows: 1. In terms of appearance, the Beijing BJ40, with its rugged SUV style, features multiple right-angle designs, exuding a strong masculine vibe. The interior, as befits an off-road vehicle, is not overly luxurious but adopts a simple and rugged design style reminiscent of the "Wrangler." The switches for the windows and central locking are designed as toggle levers, giving a very retro feel. 2. In terms of power, the BJ40 is powered by a 2.4L naturally aspirated engine with a maximum power of 105kW and a maximum torque of 217Nm, paired with a 5-speed manual transmission. The new vehicle also comes with a mechanical part-time four-wheel-drive system and employs a body-on-frame structure. Additionally, the rear suspension of the Beijing Jeep BJ40 is a five-link non-independent suspension, providing better support for extreme off-roading.
5
1
Share

What does the dashboard bulb exclamation mark mean?

Yellow bulb with an exclamation mark, this is the light fault indicator, indicating that there is a fault with the vehicle's lights. Solution: Go to a 4S shop for inspection and repair as soon as possible, or you can check it yourself. Focus on checking commonly used bulbs such as turn signals, fog lights, and interior lighting to see where the problem lies. The exclamation mark is a common fault warning in cars. In addition to the yellow bulb with an exclamation mark, there are four other forms of exclamation marks: an exclamation mark inside a triangle, an exclamation mark inside a yellow gear, an exclamation mark in the middle of a bracket circle, and an exclamation mark in the middle of a horizontal line under a bracket. Here is a detailed analysis: General fault: An exclamation mark inside a triangle. If this symbol lights up, it indicates a fault in the vehicle's general performance, components, or functions. Mainly includes parking sensor failure, fuel cut-off system intervention or failure, external light failure, engine oil pressure sensor failure, etc. It is necessary to go to a 4S shop for inspection to identify the source of the fault. Automatic transmission fault: An exclamation mark inside a yellow gear. This is the automatic transmission fault warning light, indicating that there is a fault in the transmission or the transmission lubricating oil is below the normal range. The transmission oil needs to be replaced in time. Brake system fault: An exclamation mark in the middle of a bracket circle. This represents a warning of the brake system, mainly indicating a fault in the brake system or low brake fluid level. The brake system needs to be inspected and repaired immediately to avoid accidents. Tire pressure abnormality: An exclamation mark in the middle of a horizontal line under a bracket. This represents the tire pressure monitoring warning light. When the tire pressure of the car is too low, this warning light will come on. It is necessary to check the tire pressure of the car and restore it to the normal range.
3
3
Share

How to Check the Tire Pressure Monitoring on the Trumpchi GA4?

The tire pressure monitoring on the Trumpchi GS4 can be viewed on the dashboard. The vehicle is equipped with a tire pressure monitoring system that provides automatic alarm prompts, requiring no manual operation. When the tire pressure light needs to be reset, if the tire pressure sensor hasn't been replaced, the light will automatically turn off after driving a certain distance. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, completing the tire pressure reset. There are three common types of tire pressure monitoring methods: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. The system automatically alerts when the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, making it rotate faster than the other wheels. By comparing the differences in rotation speeds between the tires, the system monitors the tire pressure. Indirect tire pressure warning systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): This system combines the advantages of both the above systems. It is equipped with direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Compared to using only a direct system, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time data on the actual pressure in all four tires as a direct system can.
17
4
Share

How many liters of engine oil does the Edge require?

Ford Edge requires approximately 5 liters of engine oil. After adding the oil, you can use the dipstick to check if the level is appropriate. It's important to note that you should wait three minutes after turning off the engine before checking the oil level with the dipstick. This three-minute wait allows the oil to flow back into the oil pan, ensuring a more accurate measurement. Here is more information about the Ford Edge: 1. The vehicle dimensions are: length 4680mm, width 1930mm, height 1700mm, with a wheelbase of 2824mm. 2. It is equipped with a 2.0L EcoBoost inline-four direct injection engine, which delivers a maximum power of 243 horsepower and a maximum torque of 345N·m. Additionally, the 3.5L V6 engine has been retained due to significant improvements in fuel economy achieved through recalibration, producing a maximum power of 288 horsepower and a maximum torque of 336N·m.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.