In which year was the Mercedes-Benz E320 discontinued?

2 Answers
Franklin
07/24/25 9:01am
Discontinued in 2016. Here is some related information about the Mercedes-Benz E300: 1. Interior: The dark gray interior appears youthful, paired with brown seats, giving a premium feel. The focal point on the upper part of the dashboard is the large GPS navigation screen, which is impressive and adds prestige. The central section features audio control buttons. 2. Exterior: The front fascia design is identical to the imported version, with sharp lines for the split high and low beam headlights, creating an overall youthful and dynamic effect that completely revamps the "old Benz" image. The LED light clusters below the front bumper further emphasize the fashion-forward design.
Was this review help?
20
3
Share
Lonnie
08/11/25 4:31am
I remember the Mercedes-Benz E320, which belongs to the E-Class series and was introduced as a main model in the mid-1990s, first in the W210 generation and later continued into the W211 generation. Production of the W211 began around 2002, but by 2006, Mercedes-Benz had upgraded and modified it, mainly due to advancements in engine technology requiring naming adjustments. This led to the discontinuation of the E320, which was replaced by the more powerful E350 series. The E320 was known for its comfort and classic design, and pre-2006 models can still be found in the used car market today. However, for car enthusiasts, its discontinuation marked the end of an era, as Mercedes-Benz completely revamped the powertrain in subsequent generations like the W212.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

What Are the In-Car Audio Brands?

In-car audio brands include. JBL: JBL is actually well-known for its headphones and audio products, but who would have thought that it also supplies car audio systems for Audi, Toyota, and Ferrari? It belongs to the Harman International Group, and its capabilities should not be underestimated. However, the optional cost for mid-to-low-end JBL products is not high, and they have appeared in many economical sedans and SUVs, allowing ordinary people to enjoy the pleasure of entry-level high-end audio quality. As for the JBL QuantumLogic surround sound system installed in Ferrari's F430, California, 458, and FF series models, it represents the brand's top-tier product. Burmester: Burmester is recognized as a world-class top-tier audio brand, belonging to the high-end High-End audio category. Among all luxury audio brands, Burmester is considered the most coveted top brand by audiophiles. Undeniably, Hi-End audio is on a completely different level compared to ordinary Hi-Fi. Burmester delivers exceptionally balanced performance across all frequency ranges, with highly accurate soundstage reproduction. Porsche and Mercedes-Benz are its primary clients, though the price often exceeds 100,000 yuan, making its high cost its only drawback.
4
2
Share

What does tire vulcanization mean?

Tire vulcanization refers to the vulcanization of the outer tire, which is carried out through a model pressurization method. The following is an expansion on tire vulcanization: The role of tire vulcanization: Before vulcanization, the internal microstructure of the tire is a linear polymer, which is a viscoelastic and plastic rubber that is prone to deformation and has low strength. Through vulcanization, the linear polymers in the plastic rubber undergo a cross-linking reaction, forming a network-like polymer material. Macroscopically, this results in solidification, transforming it into a highly elastic rubber with practical value. The reason for tire vulcanization: Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must possess high load-bearing performance, traction performance, and cushioning performance. Additionally, they need to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation.
9
3
Share

What are the penalties for modifying wheel rims?

Modifying wheel rims is considered an illegal modification of motor vehicles and will result in a fine ranging from 500 to 1,000 yuan, along with an order to restore the vehicle to its original condition. Any changes to the structure, construction, or characteristics of a registered motor vehicle must be reported to the vehicle management office within ten days of the modification; otherwise, penalties will be imposed according to the law. The penalties for modifying wheel rims are as follows: According to the "Road Traffic Safety Law of the People's Republic of China": 1. For changes to the vehicle's body color, engine (excluding engine type), or frame, if the modification procedures are not completed within ten days, a warning or a fine of up to 200 yuan will be imposed. 2. For changes to the engine type, modification of the vehicle's exhaust pipe, addition of rear spoilers, or addition of front searchlights, the vehicle must be restored to its original condition, and a warning or a fine of up to 500 yuan will be imposed. 3. For domestic vehicles, changing tire specifications or adding body kits and protective devices will require restoration to the original condition, along with a warning or a fine of up to 500 yuan. Therefore, if you intend to modify your wheel rims, be sure not to alter the rim size, as such modifications will not only fail the annual inspection but may also result in fines if discovered by traffic police.
10
4
Share

What are the symptoms of a damaged brake master cylinder in the Wuling Zhiguang?

The symptoms of a damaged brake master cylinder in the Wuling Zhiguang include a soft brake pedal feel when pressed, primarily due to poor sealing between the master cylinder and the wheel cylinders; brake failure, where a sudden loss of braking force is felt during braking, usually caused by insufficient brake fluid or oil leakage from the master cylinder; delayed return of the brake pedal; and when the vehicle is parked, after pressing the pedal several times consecutively, the pedal returns to its original position without gradually decreasing. The braking system consists of the brake master cylinder, wheel cylinders, vacuum booster, brake pads, and brake discs. If you notice any issues with the brakes while driving, you should pull over promptly and check for oil leaks or excessively high temperatures in the brake discs. If any of these symptoms are present, it is advisable to call for a tow truck. Symptoms of a damaged wheel cylinder: Deterioration in braking performance, with noticeably longer braking distances; delayed return causing continuous friction of the brake pads, leading to temperature rise and thermal fade; brake pull, where the vehicle veers significantly when braking, which may indicate a faulty wheel cylinder; and loud abnormal noises during braking. Symptoms of a damaged brake booster: Noticeably heavier brake pedal feel; abnormal noises during braking; significantly longer brake pedal travel with reduced effective braking distance.
16
4
Share

What Causes the Engine Malfunction Indicator Light to Illuminate?

Reasons for the engine malfunction indicator light illuminating: Carbon deposit issues: Carbon deposits here include cylinder carbon deposits, throttle carbon deposits, spark plug carbon deposits, intake carbon deposits, etc. These areas are closely related to the engine's power output. When there is excessive carbon buildup inside the engine, the vehicle's ignition energy decreases, intake efficiency declines, ultimately leading to reduced engine power and symptoms like weak idling. Fuel system: Adding incompatible fuel grades, such as using 90 octane instead of 93 octane, can cause a decrease in the vehicle's output power and performance. Alternatively, if the fuel tank cap vent is blocked, or components like the fuel tank switch, fuel filter, or fuel lines between the tank and carburetor are partially obstructed, the required fuel supply cannot be met, resulting in a lean air-fuel mixture and weakened engine acceleration. Intake system: Intake air is one of the power sources for the engine. If the air filter is not cleaned regularly and becomes clogged after prolonged use, insufficient air volume will cause the combustible mixture to become too rich, leading to decreased engine power. For vehicles equipped with turbochargers, any malfunction in the turbocharging system can also result in reduced engine power or performance loss.
4
4
Share

What role does the ABS system play during emergency braking of a motor vehicle?

The role of the ABS system during emergency braking of a motor vehicle is to: fully utilize the effectiveness of the brakes, shorten braking time and distance; effectively prevent vehicle skidding and fishtailing during emergency braking, ensuring good driving stability; allow steering during emergency braking, providing excellent steering control; avoid severe friction between the tires and the ground, reducing tire wear. ABS, short for Antilock Brake System, functions by automatically controlling the braking force during vehicle braking to prevent wheel lock-up, keeping the wheels in a state of rolling and sliding (with a slip ratio of about 20%), ensuring maximum adhesion between the wheels and the ground. During braking, the ABS quickly determines the lock-up state of each wheel based on the speed signals from the wheel speed sensors, closing the normally open input solenoid valve for the wheel that begins to lock up, maintaining the braking force. If the wheel continues to lock up, the normally closed output solenoid valve is opened, causing the braking pressure on that wheel to rapidly decrease due to the direct connection to the brake fluid reservoir, preventing the wheel from completely locking up due to excessive braking force. This keeps the braking state at the optimal point (with a slip ratio S of 20%), achieving the best braking effect and the highest level of driving safety.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.