In which year was the last batch of Santana Vista produced?

3 Answers
LeilaniFitz
07/29/25 1:37pm
The last model was the 2010 version produced in 2010. The Santana Vista is a mid-size car under the Volkswagen brand. Powertrain specifications: This engine delivers a maximum power of 70kW, with peak torque of 140Nm. The maximum power output is achieved at 5,200 rpm, while peak torque arrives at 3,800 rpm. Vehicle dimensions: The car measures 4,687mm in length, 1,700mm in width, and 1,450mm in height, with a wheelbase of 2,656mm.
Was this review help?
1
0
Share
StEllie
08/14/25 4:32am
I have an in-depth understanding of automotive history. The Volkswagen Santana Vista, also known as the Zhijun, had its final production batch in 2012. I remember it was officially discontinued by the end of 2012, as Volkswagen introduced the new Santana in China to replace it. The Santana series has been in the Chinese market for decades, and the Zhijun was one of its classic versions, upgraded around 2008 and produced until 2012. The main reasons for its discontinuation were outdated technology and stricter environmental standards. Around 2012, emission regulations became more stringent, requiring new cars to be more fuel-efficient and produce lower emissions. Although the Zhijun was sturdy and durable, its interior and engine felt somewhat dated, prompting Volkswagen to decisively replace it. Looking back, 2012 was a turning point for China's automotive industry, as many older models phased out around that time, significantly impacting the development of the new Santana. If you're a car enthusiast, studying this history is quite fascinating.
Was this review help?
1
2
Share
Expand All
SanBrielle
10/10/25 4:14am
I have some experience in buying and repairing cars. The last production year of the Santana Vista was 2012. Cars from that year might still be on the road, but if you're looking for a brand-new one, it's definitely out of the question. Production was completely discontinued after 2012, as Volkswagen shifted to manufacturing the new Santana. If you're considering a used Santana Vista, the 2012 model is relatively newer, but you should pay attention to maintenance issues since spare parts have become scarce after production ceased, and repairs might be more troublesome. It's advisable to have a professional shop inspect the engine and electrical systems, as older cars are prone to minor issues. In 2012, the Santana Vista had slightly higher fuel consumption compared to newer models, but its sturdy chassis made it quite stable for long-distance driving. Overall, 2012 marked the end of the Santana Vista, and as an owner, you should be prepared for the reality of gradual aging and focus more on maintenance to extend its lifespan.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

When is car insurance generally the cheapest?

Buying car insurance in July-August can be slightly cheaper than usual. July-August is relatively the off-season for car insurance, and insurance companies will launch various campaigns to boost consumption. Here are some introductions about car insurance: 1. Compulsory Traffic Insurance: A mandatory national car insurance that provides coverage for the other party's property and personal safety. 2. Special Additional Coverage for Non-Deductible: The most important aspect of this car insurance is the absolute deductible waiver. 3. Vehicle Damage Insurance: Vehicle Damage Insurance primarily protects the car. If the car is involved in an accident or suffers damage due to natural disasters, these losses can be compensated by the insurance company through Vehicle Damage Insurance. 4. Third-Party Liability Insurance: Also known as Third-Party Insurance, it mainly covers the personal injuries, deaths, and property losses of third parties in traffic accidents. To supplement the coverage limit of Compulsory Traffic Insurance, a comprehensive Third-Party Liability Insurance is necessary.
1
3
Share

How to Replace the Air Conditioning Filter in an Old Tiida?

Open the glove compartment and remove the three screws to take out the glove compartment. Press the upper and lower clips on the left side inside, remove the cover of the air conditioning filter, pull out the old filter, and install the new one. Here is more information about the air conditioning filter: 1. Function: Ensures the filter fits tightly against the housing to prevent unfiltered air from entering the cabin; absorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc.; has strong and long-lasting moisture absorption; separates solid impurities like dust, pollen, and abrasive particles from the air. 2. Replacement Interval: The replacement interval for a car's air conditioning filter is generally between 10,000-15,000 kilometers. High-quality filters, due to better filtration, tend to have a longer lifespan.
1
0
Share

What to Pay Attention to When Overtaking?

When overtaking, the car needs to turn on the turn signal. It is important to observe the road conditions around the vehicle to confirm that it is safe to overtake before steering to change lanes. After completing the overtaking maneuver, immediately return to the original lane. Here are some relevant points: 1. Safety Hazards: Failing to turn on the turn signal when overtaking or changing lanes can create safety hazards for vehicles behind, increasing the risk of rear-end collisions. Continuous lane changes can be determined by the car's turn signals, such as when a vehicle signals before changing lanes. 2. Adjusting Speed: Drivers can adjust their speed according to the speed limits indicated by navigation for each road section. Otherwise, safety hazards may arise. Driving too slowly can lead to vehicles following too closely, which also poses safety risks. Therefore, when overtaking or changing lanes, it is essential to pay attention to the driving conditions of vehicles on both sides.
7
5
Share

What to Do When the Battery of a Buick GL8 Runs Out of Power?

When the battery of a Buick GL8 runs out of power, the most reliable solution is to promptly contact a rescue vehicle, then connect jumper cables to temporarily charge the battery and start the engine. Here are some relevant details: 1. Push-Start Method: Push-starting is the most common and effective emergency starting method, but it should be used as a last resort and not frequently, as it can cause some damage to the engine and clutch. This method should especially be avoided for automatic transmission vehicles. 2. Connecting Jumper Cables: To avoid being unable to charge the battery when it runs out of power, car owners should keep a set of jumper cables in the vehicle, which can be purchased at most auto parts stores. However, when connecting jumper cables, it is crucial not to mix up the connection order. First, connect the positive terminal of the dead battery to the positive terminal of the rescue vehicle's battery. Then, connect the negative terminal of the rescue vehicle's battery to a metal part (ground) in the engine compartment of the dead vehicle. After connecting the jumper cables, start the rescue vehicle's engine and slightly increase its RPM. After about 5 minutes, the dead battery can be temporarily charged. Once charging is complete, disconnect the jumper cables in the reverse order of connection.
3
2
Share

How Many Days of Toll-Free Highways During Mid-Autumn Festival Holiday?

Normally, highways are not toll-free during the Mid-Autumn Festival. Here is the relevant information about toll-free highways: 1. Reason why highways are not toll-free during Mid-Autumn Festival: The main reason is still about money. The more toll-free time there is, the less profit highway companies make. The current policy is basically a result of balancing the interests of all parties. Therefore, only the Spring Festival, Qingming Festival, Labor Day, and National Day (including Mid-Autumn Festival) have toll-free highways, while other holidays, including New Year's Day, Dragon Boat Festival, and Mid-Autumn Festival, still charge normally. 2. Toll-free highway periods: Highways are toll-free during the four major holidays: Spring Festival, Qingming Festival, Labor Day, and National Day (including Mid-Autumn Festival).
11
5
Share

How to set the automatic tilt-down function for Audi Q3's rearview mirror when reversing?

To activate this function, you need to turn the mirror knob to the right position and then shift into reverse gear. The following are detailed instructions: 1. Activation conditions: Adjust the mirror control knob to the right position and shift into reverse gear. 2. Deactivation conditions: The mirror will automatically return to its original position when the ignition is turned off or when the vehicle speed exceeds 15 km/h in forward motion. Alternatively, you can manually move the mirror control knob away from the right position. Additionally, the tilt-down angle of the Q3's rearview mirror during reversing can be customized. When in reverse gear, manually adjust the right mirror to the desired tilt-down angle, and the vehicle will automatically save this setting. The next time you reverse, the right mirror will automatically adjust to the memorized position.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.