In which year was the last batch of Mitsubishi V33 produced?

1 Answers
XavierMarie
07/25/25 2:07am
Mitsubishi V33 was last produced in 2001 and was replaced by the Mitsubishi Pajero V73. The following are relevant details about the Mitsubishi V33: 1. The Mitsubishi V33 was an off-road vehicle produced from the mid-1990s to around 2001. 2. The Mitsubishi V33 gained fame primarily for manufacturing military off-road vehicles. Although it was eventually discontinued, it inherited and utilized the technology and characteristics of military-grade manufacturing, resulting in durable and powerful vehicles. 3. The advantages of the Mitsubishi V33 include its spacious size, well-designed interior layout, strong power output, flexible handling, high ground clearance, and ample cabin space. 4. The drawbacks of the Mitsubishi V33 include rattling noises near the dashboard, significant wind noise, high maintenance costs, poor fuel economy, and slow acceleration.
Was this review help?
15
4
Share
More Forum Discussions

Reasons for Popping Sounds When Pressing the Car Brake?

Unusual sounds when pressing the brake may be due to ABS normal operation, safety reminders, loose chassis components, or unstable brake discs. Below are the related reasons for car brake issues: 1. ABS Working Principle: The ABS operation is actually a cyclic process of locking-releasing-locking-releasing, keeping the vehicle in a state of near-lock rolling. Therefore, when you press the brake hard and trigger the ABS, it will produce a clicking sound, which is normal. In this case, simply press the brake firmly to the end. 2. Transmission and Gear Lever: If you hear a 'click' sound between the transmission and the gear lever when pressing the brake pedal, the main reason may be the electronic linkage between the brake system and the automatic transmission. Pressing the brake activates the transmission solenoid valve, producing a 'click' sound. At this point, you need to press the gear lever lock button to shift gears, which serves as a safety reminder.
2
5
Share

What color is the antifreeze for the Trumpchi GS8?

The Trumpchi GS8 uses antifreeze with the specification YA-956 concentration, which has a freezing point of -35℃. The antifreeze comes in two colors: green and red, and the radiator capacity is 10.18 liters. The antifreeze for the Trumpchi GS8 should be replaced every 40,000 kilometers or every two years. More details are as follows: 1. If you need to enhance the antifreeze capability of the coolant during severe winter seasons, you can appropriately increase the proportion of coolant additive. However, the concentration of the coolant must not exceed 65%, as this could otherwise reduce the antifreeze capability and weaken the cooling effect. 2. It is best not to mix antifreeze coolants of different brands and models to avoid the antifreeze coolant becoming ineffective due to differing chemical compositions. In other words, when replacing the antifreeze coolant, it is advisable to choose the same brand and model. If switching to a different brand of antifreeze coolant, it is recommended to first drain the existing antifreeze coolant from the engine and thoroughly clean all cooling lines before adding the new one.
5
4
Share

What brand is the Civic audio system?

Dongfeng Honda Civic's original car audio system is the German HELIX audio. Functions of the SEL, RPT, and RDM buttons on the radio: This button controls whether to automatically search for radio signals. After pressing it, you can see the word SEL flashing on the screen, and the system will enter scan mode, capable of storing 6 AM stations and 12 FM stations. When playing a CD/MP3 disc, pressing this button will display RPT on the right side of the screen, indicating repeat playback of the current song. Pressing the RPT button again will display F-RPT, meaning repeat playback of all songs in the current folder. Pressing the button once more cancels the repeat playback. Pressing the RDM button will make the system randomly play any song from the current disc. Radio volume control: You can see a TUNE knob on the right side of the audio system with the PUSH SOUND label. Repeatedly pressing it allows you to switch between bass, treble, front/rear balance, left/right balance, and speed-linked volume control. Press once to enter bass control and turn the TUNE knob to adjust.
2
3
Share

What Causes the Car Key Light to Illuminate?

Car key light illumination can be due to car key malfunction, engine issues, or failure to detect the key signal. The key light turning on indicates either a signal detection failure or depleted battery in the electronic key. If the key light remains illuminated after starting the engine, it signifies an engine fault that requires diagnostic trouble code (DTC) scanning at an auto repair shop to pinpoint the issue. Below are detailed explanations of the causes: Car Key Malfunction: When the key warning light activates, it indicates a problem with the vehicle's anti-theft system or the key itself. The most common cause is a depleted battery in the smart key, which can be resolved by replacing the key battery. However, if the light persists after engine start-up, this confirms an engine malfunction. Engine Fault: If the key light continues to stay illuminated after starting the engine, this confirms an engine fault that requires immediate attention. Visit an auto repair shop to use an OBD scanner to read the trouble codes and perform necessary repairs. Key Signal Not Detected: Failure to detect the key signal can also trigger the key light. Solutions include re-synchronizing the key signal or having the system inspected at a repair shop.
17
4
Share

Do motorcycles need an inspection every six years?

Motorcycles exempt from inspection for 6 years do not require on-site inspection within the first 6 years. Owners only need to collect the inspection compliance label at the traffic police station or vehicle management office in the 2nd, 4th, and 5th years. After 6 years, on-site inspection is required. Below are detailed explanations about motorcycle annual inspections: 1. Background: Since June 1, 2019, nationwide motorcycle inspection and 6-year exemption have been implemented. The Ministry of Public Security further expanded the scope of nationwide "universal inspection" for motor vehicles, promoting cross-provincial motorcycle inspection and exempting motorcycles registered within 6 years from inspection. 2. Proxy handling: With cross-provincial motorcycle inspection, applicants can directly inspect their motorcycles and obtain the inspection compliance label at the location where the motorcycle is used, without needing to go through the entrustment inspection process, making it convenient for people to inspect nearby. Additionally, newly registered motorcycles are exempt from inspection. For motorcycles registered within 6 years, owners only need to collect the label in the 2nd, 4th, and 5th years. For motorcycles registered for over 6 years (including 6 years), an annual inspection is still required as per regulations.
7
5
Share

What is the difference between WLTP and EPA range?

EPA range is approximately 300 miles (about 482 kilometers), while the maximum WLTP range is 590 kilometers. Here is relevant information: 1. WLTP test cycle standard: This is the latest standard promoted by the United Nations, and Europe has been using this test cycle standard since September 1, 2018. This testing method first classifies vehicles into three levels based on the ratio of vehicle power to vehicle mass: less than or equal to 22, 22~34, and greater than or equal to 34. The test includes four driving cycles: low speed, medium speed, high speed, and ultra-high speed, with a total duration of 1750 seconds and a maximum speed requirement of 135 km/h. 2. EPA test cycle standard: This is a U.S. testing standard, and its most notable feature is the separate testing of electric and hybrid modes. That is, the vehicle is first fully charged to test the pure electric range, and then tested for the hybrid mode range when the battery is depleted. The test standard includes one urban cycle and two supplemental cycles. The urban cycle covers cold start transition, steady-state, hot soak, and hot start transition conditions, with a test duration of 1877 seconds and an average speed of 34.12 km/h.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.