In which year was the first generation Jialing 70 motorcycle produced?

2 Answers
ValeriaLee
09/06/25 7:32am
The first generation Jialing 70 motorcycle was produced in 1983. Here are specific details about Jialing motorcycles: Definition: Jialing motorcycle is a brand under China Jialing Industrial Co., Ltd. On October 21, 1978, Jialing Group accepted the motorcycle development task assigned by Sichuan Province. In August, implementing the national policy of "combining military and civilian production," Jialing Group made the major decision to develop and produce civilian motorcycles. Development: Jialing motorcycles and their engines currently have over 10 displacement types ranging from 50CC to 600CC, with hundreds of models. The cumulative production and sales have exceeded 13 million units, making it the brand with the highest production and sales volume in China. The company has now established an annual production capacity of 2 million units.
Was this review help?
20
1
Share
StConnor
09/18/25 7:10am
I remember that old Jialing 70, which was probably launched around 1983. I saved up to buy it when I was young, and riding it to deliver goods in the countryside was exhilarating. The 70cc engine provided stable power, effortlessly handling hill climbs and cargo loads, while a full tank could cover dozens of kilometers—economical and practical. The spacious rear seat often helped neighbors with farm work, and everyone praised its durability, lasting over a decade without major repairs. Looking back now, it sparked the motorcycle revolution, becoming a lifeline for people in small towns. Though today's models are sleeker, the old Jialing’s simple, reliable design taught me self-reliance. It wasn’t just a tool but a proud emblem of that era.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

Can a car run normally after the engine is flooded and repaired?

After the car engine is flooded and repaired, it can be used normally without any impact on the vehicle. However, this is on the premise that the damaged components due to the flooding have been repaired or replaced, adhering to the principle of repairing what should be repaired and replacing what should be replaced. If the engine is flooded during vehicle use, even if only a small amount of water enters the engine and the vehicle does not stall, you should not continue driving. Water entering the cylinders and mixing with the engine oil degrades the oil quality. Oil containing water increases wear on engine components, leading to louder engine noise and greater vibration during subsequent driving. In severe cases, it may frequently result in oil burning or engine damage. Upon discovering that the engine is flooded, regardless of whether there are any immediate abnormalities, the first step is to turn off the engine, call for rescue, and wait for assistance. It is strictly prohibited to restart the engine or continue driving to avoid unnecessary losses.
8
2
Share

What is the plastic shell under the car trunk called?

The plastic shell under the car trunk is called the rear bumper. The car bumper is a safety device that absorbs and mitigates external impacts, protecting the front and rear parts of the vehicle body. More details are as follows: 1. Composition: It consists of three parts: the outer panel, buffer material, and crossbeam. The outer panel and buffer material are made of plastic, while the crossbeam is formed by stamping cold-rolled thin plates into a U-shaped groove, with the outer panel and buffer material attached to the crossbeam. 2. Function: The car bumper (anti-collision beam) is located in most areas of the front and rear of the vehicle. It is designed to prevent external damage from affecting the vehicle's safety system and has the ability to reduce injuries to occupants during high-speed collisions. Nowadays, it is increasingly designed for pedestrian protection.
9
4
Share

What Causes the Door Handle to Pull but the Door Won't Open?

The reason the door won't open is due to a malfunction in the locking mechanism components. Below are the causes and solutions for the door not opening: 1. Misalignment: Solution: Apply force by bumping the door a few times—either from inside or outside the car using your body—or have someone assist by pulling the door from the outside while another person pushes from inside. 2. Malfunction in the locking mechanism components: Solution: Remove the door panel from inside the car, though this is challenging since the door won't open and may result in broken panel clips. After removing the trim panel, take off the sound insulation layer to gain better access to the locking mechanism. Try pulling the cable manually to see if it moves. If not, use a hammer and chisel or a drill to dismantle the locking mechanism.
16
1
Share

Is It Normal for Wheel Brake Discs to Rust?

It is normal for car brake discs to rust. Here is a detailed introduction about it: 1. Slight rust: Slight rust often occurs. For example, after the car is left out in the rain overnight or after washing when the car is not dried properly, slight rust can easily form. In such cases, continuous braking while driving can help remove the rust, as the brake disc rubs against the brake caliper during braking, and the rust will be worn off after multiple brakes. 2. Severe rust: If the brake disc has severe rust, the entire surface of the brake disc will have a relatively thick layer of rust. Stubborn rust can also accelerate the wear of the brake pads, so it is necessary to take the car to a repair shop to have the brake disc polished.
8
4
Share

Is the Taurus an imported model?

The Taurus is not an imported model; it is a joint-venture vehicle. The Taurus is a luxury mid-size sedan under Changan Ford, available in three models: LX, GL, SE, and SHO. The vehicle's dimensions are 5019mm in length, 1854mm in width, 1425mm in height, with a wheelbase of 2756mm. It features an independent pneumatic-hydraulic front suspension with a stabilizer bar and a four-link independent pneumatic-hydraulic rear suspension with a stabilizer bar. The new Taurus adopts a hexagonal front grille design, complemented by chrome trim, seamlessly integrated with LED headlights. The rear features a chrome strip connecting the LED taillights, with symmetrically arranged chrome dual exhaust pipes that coordinate with the central LED fog lights. Additionally, the vehicle is equipped with 19-inch aluminum alloy wheels.
9
1
Share

What is the battery model for Lavida?

Lavida batteries come in two models: Fengfan 6QW60 and Bosch L2400. The original car battery has a lifespan of 3 to 4 years, and Volkswagen provides a 2-year warranty for the battery. In addition to regular maintenance at 4S stores, daily battery care is essential. When replacing or installing a Lavida battery, it is important to turn off the ignition switch and all electrical appliances before removing the battery. Lavida is Shanghai Volkswagen's first independently developed A-class car, which not only maintains the excellent quality of German design but also incorporates many aesthetic concepts reflecting traditional Chinese culture and cutting-edge design elements. The front face design of Lavida is significantly different from previous Volkswagen A-class cars, especially its unique teardrop-shaped headlights. In terms of body line design, Lavida features sharp waistlines while retaining a side profile similar to the Octavia, a design that facilitates easy access for rear passengers.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.