In which year was the Beetle discontinued?

When Pulling Over, Should You Press the Clutch or Brake First?

The specific approach depends on the vehicle's speed at the time. If the speed is relatively high, you should first apply the brake to reduce speed, then fully depress the clutch and gently press the brake. However, during a test or when the speed is not high, you can fully depress the clutch first, followed by the brake. Below is an introduction to the clutch: 1. Introduction: The clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. 2. Function: The driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the power from the engine to the transmission. 3. Basic Requirements: Smooth engagement, quick and thorough disengagement; easy adjustment and repair; compact size; lightweight; good wear resistance and sufficient heat dissipation capacity; easy and effortless operation. Commonly, clutches are divided into two types: jaw clutches and friction clutches.

3

4

Share

How Long Does It Take to Feel Oxygen Deprivation When Using the Car's Recirculation Mode?

Generally, it takes about 2 hours. If the recirculation mode is used for too long, you may feel stuffy, and it's time to switch to the fresh air mode to let in outside air. Here are some related details: Recirculation Mode: The recirculation mode closes the airflow passage between the inside and outside of the car. Without the fan, there is no airflow circulation. When the fan is on, the airflow drawn in comes only from inside the car, creating an internal airflow cycle. The recirculation mode mainly prevents external dust and harmful gases from entering the car, such as when driving through smoke, dust, areas with strong odors, or in heavy traffic, blocking harmful exhaust from the vehicle ahead. Another function is to maintain temperature. Combined Usage: The use of recirculation and fresh air modes should be combined with the air conditioning and heating system. Using the fresh air mode allows you to breathe fresh outside air. During long highway drives, if the air inside the car feels stale and uncomfortable, and you can't open the windows, you should switch to the fresh air mode to let in some fresh air. In winter, if the heating feels too warm, you can turn off the fan and switch to the fresh air mode to maintain the interior temperature while getting fresh air, which will feel more comfortable.

6

3

Share

What is the reason for the flashing car with lock light on the Corolla dashboard?

The flashing car with lock light on the Corolla dashboard indicates that the anti-theft indicator light is activated, meaning the vehicle has entered the anti-theft mode. This serves to prevent vehicle theft, intrusion, protect the car, and achieve various functions of the anti-theft device. The role of the car anti-theft system: The car anti-theft system is designed to prevent the theft of the vehicle itself or items inside the car. It consists of an electronically controlled remote or key, electronic control circuits, alarm devices, and actuators. The earliest car door locks were mechanical, used only to prevent doors from opening automatically while driving to avoid accidents, serving a safety function rather than an anti-theft purpose. Types of car anti-theft functions: A car anti-theft device is installed in the vehicle to increase the difficulty of car theft and prolong the time required to steal the car, acting as a guardian for the vehicle. By connecting the anti-theft device with the car's electrical circuit, it can prevent vehicle theft, intrusion, protect the car, and achieve various functions of the anti-theft device. With advancements in technology, to counter increasingly sophisticated car theft methods, various types and structures of anti-theft devices have been developed. Anti-theft devices can be categorized into four main types based on their structure: mechanical, chip-based, electronic, and network-based.

19

2

Share

Why does the Tiguan always squeak after starting?

Tiguan cold start squeaking is a normal phenomenon. Due to dew and undried water from car washing adhering to the brake discs, the brake discs rust quickly. Additionally, after pulling the handbrake overnight, the sound will naturally disappear once the vehicle has run for a distance and the brake clearance returns to normal as the car warms up. The cooling system maintenance methods are as follows: 1. Check the water pump: First, visually inspect the water pump's drain hole, thermostat connection, upper and lower hose connections, drain port, radiator cap, and coolant reservoir for any signs of leakage. If leaks are found, identify the cause and address it immediately; never continue driving with the issue. 2. Check the antifreeze's freezing point: Generally, the antifreeze's freezing point should be 5 to 10°C lower than the lowest temperature in the vehicle's operating region. 3. Monitor the antifreeze level: The ideal level is about 10 mm below the radiator filler neck, or follow the standard markings on the coolant reservoir to top up with the same type of antifreeze. 4. Check the thermostat: If the thermostat is not functioning properly, the engine will operate at either too low or too high temperatures for extended periods, accelerating wear and shortening the engine's lifespan. Therefore, ensure the thermostat is in good condition.

1

4

Share

Does the Tayron have a particulate filter?

Tayron 2020 and 2021 models with the 280 engine are equipped with the EA211-DJS engine, which includes a particulate filter. A particulate filter is a ceramic filter installed in the diesel engine's emission system that captures particulate emissions before they enter the atmosphere. It can reduce soot emissions from diesel engines by more than 90%, and the captured particulate matter is subsequently burned off during vehicle operation. Working principle of the particulate filter: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the particulate filter through a dedicated pipe. Inside, a densely arranged bag-type filter captures the carbon particles on a metal fiber felt filter. When the accumulated particulate matter reaches a certain level, the burner at the end automatically ignites, burning off the captured carbon particles and converting them into harmless carbon dioxide. To check if the Tayron has a particulate filter, you can use the following three methods: Check the and to see if the particulate filter function is mentioned. Additionally, carefully review the fault codes in the manual to see if there is a "particulate filter" warning light indicator. Check the label on the oil cap. If the oil cap clearly states the use of 0W-20 grade oil, it indicates the presence of a particulate filter. Look behind the three-way catalytic converter to see if there is a cylindrical section on the exhaust pipe. If present, that is the particulate filter.

15

2

Share

What are the reasons for the BYD S6 air conditioner not cooling?

The reasons for the BYD S6 air conditioner not cooling include insufficient or too little refrigerant, which requires adding refrigerant or releasing excess refrigerant; the air conditioner compressor drive belt is loose, requiring tightening of the drive belt; the use of unqualified refrigerant and refrigeration oil, necessitating replacement; moisture has entered the refrigeration system, requiring replacement of the desiccant, followed by vacuuming the air conditioning system and refilling it with a new, appropriate amount of refrigerant. A common reason for car air conditioners not cooling is insufficient or too little refrigerant. The proportion of refrigerant in the air conditioning system has specific requirements; too much or too little will affect its heat dissipation. If there is too little, refrigerant can be added from the low-pressure side; if there is too much, some refrigerant can be slowly released from the maintenance port on the low-pressure side of the air conditioning system. If the drive belt is loose, the compressor will slip during operation, leading to reduced transmission efficiency, decreased compressor speed, and reduced delivery of compressed refrigerant, resulting in the car air conditioner not cooling. If the compressor drive belt is too loose, it needs to be tightened. If it cannot be turned by hand, it indicates the belt is too tight and should be slightly loosened. If tightening is ineffective or the belt has cracks, aging, or other damage, a new drive belt should be replaced. Excessive impurities in the refrigerant and refrigeration oil can also cause the car air conditioner's filter to become clogged, leading to the air conditioner not cooling. Increased resistance will reduce the flow of refrigerant to the expansion valve, resulting in insufficient cooling capacity. It is necessary to reselect qualified refrigerant for addition. If moisture enters the car air conditioner's refrigeration system, it can also cause insufficient cooling or no cooling. In this case, the desiccant or dryer in the car air conditioner needs to be replaced. At the same time, the system should be vacuumed again, and a new, appropriate amount of refrigerant should be injected.

11

1

Share

In which year was the Beetle discontinued?

When Pulling Over, Should You Press the Clutch or Brake First?

How Long Does It Take to Feel Oxygen Deprivation When Using the Car's Recirculation Mode?

What is the reason for the flashing car with lock light on the Corolla dashboard?

Why does the Tiguan always squeak after starting?

Does the Tayron have a particulate filter?

What are the reasons for the BYD S6 air conditioner not cooling?

What are the reasons for a single-cylinder gasoline engine failing to start?

What certificates are required to drive a 4.2 refrigerated truck?

Where to Check Motorcycle Violations?

What is the safe wading depth of the Jimny?